Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-06 21:41:55
From: Anonymous
Description: Powermac G5 11,2
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #33 r333927M: Sun May 20 11:30:49 PDT 2018
    XXXXXXX:/usr/obj/usr/src/powerpc.powerpc64/sys/XXXXX powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1920x1200
cpu0: IBM PowerPC 970MP revision 1.1, 2000.31 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN>
real memory  = 7469305856 (7123 MB)
avail memory = 7101333504 (6772 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
pcib0: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0
pcib0: 86 HT IRQs on device 7.0
pci0: <OFW PCI bus> on pcib0
pcib0: Enabling MSI window for HyperTransport slave at pci0:0:1:0
pcib1: <OFW PCI-PCI bridge> at device 9.0 on pci0
pci1: <OFW PCI bus> on pcib1
fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff irq 39 at device 14.0 on pci1
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:9c:60
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented.  Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1, CYCLEMASTER mode
ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 at device 13.0 on pci1
atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff irq 10 at device 12.0 on pci1
pcib0: failed to reserve resource for pcib1
atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0
pcib2: <OFW PCI-PCI bridge> at device 8.0 on pci0
pci2: <OFW PCI bus> on pcib2
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at device 11.2 on pci2
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci2
usbus1 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci2
usbus2 on ohci1
macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci2
pcm0: <Apple I2S Audio Controller> mem 0x14000-0x14fff,0x8800-0x88ff,0x8900-0x89ff irq 30,15,16,28,11,12 on macio0
i2s_setup: changing format not supported yet.
device_attach: pcm0 attach returned 45
iichb0: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0
iicbus0: <OFW I2C bus> on iichb0
iicbus0: <unknown card> at addr 0x24
onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 24,19,20,23,17,18 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
pcib3: <OFW PCI-PCI bridge> at device 7.0 on pci0
pci3: <OFW PCI bus> on pcib3
gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device 15.0 on pci3
gem0: invalid MAC address
device_attach: gem0 attach returned 6
pcib4: <OFW PCI-PCI bridge> at device 6.0 on pci0
pci4: <OFW PCI bus> on pcib4
pcib5: <OFW PCI-PCI bridge> at device 5.0 on pci0
pci5: <OFW PCI bus> on pcib5
pcib6: <OFW PCI-PCI bridge> at device 4.0 on pci0
pci6: <OFW PCI bus> on pcib6
pcib7: <OFW PCI-PCI bridge> at device 3.0 on pci0
pci7: <OFW PCI bus> on pcib7
pcib8: <OFW PCI-PCI bridge> at device 2.0 on pci0
pci8: <OFW PCI bus> on pcib8
bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci8
bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci8
bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib9: <OFW PCI-PCI bridge> at device 1.0 on pci0
pci9: <OFW PCI bus> on pcib9
pcib10: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0
pci10: <OFW PCI bus> on pcib10
vgapci0: <VGA-compatible display> mem 0x92000000-0x92ffffff,0x98000000-0x9fffffff,0x91000000-0x91ffffff irq 3 at device 0.0 on pci10
vgapci0: Boot video device
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 66
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0
iichb1: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0,1 on unin0
iicbus1: <OFW I2C bus> on iichb1
max66900: <Temp-Monitor MAX6690> at addr 0x9c on iicbus1
max66901: <Temp-Monitor MAX6690> at addr 0x98 on iicbus1
ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus1
ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus1
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 1038, bank1 generation 1037
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pcr0: <PPC 970 Power Control Register> on cpu0
pcr0: No power mode data in device tree!
device_attach: pcr0 attach returned 6
cpu1: <Open Firmware CPU> on cpulist0
pcr1: <PPC 970 Power Control Register> on cpu1
smu0: <Apple System Management Unit> on ofwbus0
smu0: registered as a time-of-day clock, resolution 0.001000s
iichb2: <SMU I2C controller> on smu0
iicbus2: <OFW I2C bus> on iichb2
iichb3: <SMU I2C controller> on smu0
iicbus3: <OFW I2C bus> on iichb3
iicbus3: <unknown card> at addr 0xd4
smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus3
Timecounter "timebase" frequency 33333333 Hz quality 0
Event timer "decrementer" frequency 33333333 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1)  (me) 
firewire0: bus manager 1 
bge0: link state changed to DOWN
max66900: 2 sensors detected.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
max66901: 2 sensors detected.
ugen1.1: <NEC OHCI root HUB> at usbus1
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <NEC EHCI root HUB> at usbus0
uhub1: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
usbus2: 12Mbps Full Speed USB v1.0
ugen2.1: <NEC OHCI root HUB> at usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub1: 5 ports with 5 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST3500320AS SD15> ATA8-ACS SATA 1.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ata3 bus 0 scbus3 target 0 lun 0
ada1: <ST2000DM001-1ER164 CC26> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: quirks=0x1<4K>
SMP: AP CPU #1 launched
Trying to mount root from ufs:/dev/ada1p2 [rw,noatime]...
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present