Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-06 22:20:15
From: Anonymous
Description: Supermicro X11SSH-CTF
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p1 #0: Wed Aug 9 11:55:48 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(efifb): resolution 1600x1200
CPU: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz (3504.13-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33096093696 (31562 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1752063194 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SUPERM> on motherboard
acpi0: Power Button (fixed)
unknown: memory range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mpr0: <Avago Technologies (LSI) SAS3008> port 0xe000-0xe0ff mem 0xdf440000-0xdf44ffff,0xdf400000-0xdf43ffff irq 16 at device 0.0 on pci1
mpr0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2308> port 0xd000-0xd0ff mem 0xdf240000-0xdf24ffff,0xdf200000-0xdf23ffff irq 17 at device 0.0 on pci2
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 5285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf800000-0xdf80ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdf810000-0xdf811fff,0xdf81e000-0xdf81e0ff,0xdf81d000-0xdf81d7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xdf7c0000-0xdf7dffff,0xdf700000-0xdf77ffff,0xdf7e0000-0xdf7e3fff irq 16 at device 0.0 on pci3
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 18 at device 0.0 on pci5
vgapci0: Boot video device
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> mem 0xdfc00000-0xdfdfffff,0xdfe04000-0xdfe07fff irq 16 at device 0.0 on pci6
ix0: Using MSIX interrupts with 9 vectors
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 8.0GT/s Width x4
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> mem 0xdfa00000-0xdfbfffff,0xdfe00000-0xdfe03fff irq 17 at device 0.1 on pci6
ix1: Using MSIX interrupts with 9 vectors
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 8.0GT/s Width x4
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci7: <ACPI PCI bus> on pcib7
nvme0: <Generic NVMe Device> port 0xa000-0xa0ff mem 0xdf510000-0xdf513fff irq 16 at device 0.0 on pci7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen0.1: <0x8086 XHCI root HUB> at usbus0
mpr0: SAS Address from SAS device page0 = 5000c5009781b055
uhub0: mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000a> enclosureHandle<0x0002> slot 0
mpr0: At enclosure level 0 and connector name ( )
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mpr0: SAS Address from SAS device page0 = 5000c5009781be81
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000b> enclosureHandle<0x0002> slot 1
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c5009781ae9d
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000c> enclosureHandle<0x0002> slot 2
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c50097861709
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000d> enclosureHandle<0x0002> slot 3
mpr0: nvd0: <Samsung SSD 950 PRO 256GB> NVMe namespace
At enclosure level 0 and connector name ( )
mpr0: nvd0: 244198MB (500118192 512 byte sectors)
SAS Address from SAS device page0 = 5000c500976d6d15
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000e> enclosureHandle<0x0002> slot 4
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c50097736525
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x000f> enclosureHandle<0x0002> slot 5
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c50097861929
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0010> enclosureHandle<0x0002> slot 8
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c5009781c565
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0011> enclosureHandle<0x0002> slot 9
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c5009772c601
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 10
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 5000c50097733b89
mpr0: Found device <401<SspTarg>,End Device> <12.0Gbps> handle<0x0013> enclosureHandle<0x0002> slot 11
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 500304801eb15bbd
mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps> handle<0x0015> enclosureHandle<0x0002> slot 24
mps0: mpr0: At enclosure level 0 and connector name ( )
uhub0: 26 ports with 26 removable, self powered
mpr0: SAS Address for SATA device = 4867484ff2c8cc81
SAS Address from SAS device page0 = 500304801f017cbd
mps0: mpr0: Found device <4411<SmpInit,SspTarg,SepDev>,End Device> <12.0Gbps> handle<0x0016> enclosureHandle<0x0003> slot 20
mpr0: At enclosure level 1 and connector name ( )
SAS Address from SATA device = 4867484ff2c8cc81
mps0: SAS Address for SATA device = 4865484ee4c4ba80
mps0: SAS Address from SATA device = 4865484ee4c4ba80
mps0: SAS Address for SATA device = 4867484ff2e0ac95
mps0: SAS Address from SATA device = 4867484ff2e0ac95
mps0: SAS Address for SATA device = 4867484ff2e3a771
mps0: SAS Address from SATA device = 4867484ff2e3a771
ugen0.2: <vendor 0x0557 product 0x7000> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub1: 4 ports with 3 removable, self powered
ugen0.3: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
da0 at mpr0 bus 0 scbus0 target 8 lun 0
da1 at mpr0 bus 0 scbus0 target 9 lun 0
da0: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 1200.000MB/s transfers
da0: Command Queueing enabled
da0: 5723166MB (11721045168 512 byte sectors)
da1: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da1: 1200.000MB/s transfers
da1: Command Queueing enabled
da1: 5723166MB (11721045168 512 byte sectors)
da3 at mpr0 bus 0 scbus0 target 11 lun 0
da2 at mpr0 bus 0 scbus0 target 10 lun 0
da3: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da3: 1200.000MB/s transfers
da3: Command Queueing enabled
da3: 5723166MB (11721045168 512 byte sectors)
da2: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da2: 1200.000MB/s transfers
da2: Command Queueing enabled
da2: 5723166MB (11721045168 512 byte sectors)
da4 at mpr0 bus 0 scbus0 target 12 lun 0
da4: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da5 at mpr0 bus 0 scbus0 target 13 lun 0
da5: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da5: 1200.000MB/s transfers
da5: Command Queueing enabled
da5: 5723166MB (11721045168 512 byte sectors)
da7 at mpr0 bus 0 scbus0 target 17 lun 0
da7: da4: 1200.000MB/s transfers
da4: Command Queueing enabled
da4: 5723166MB (11721045168 512 byte sectors)
da6 at mpr0 bus 0 scbus0 target 16 lun 0
da6: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da6: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da6: 1200.000MB/s transfers
da6: Command Queueing enabled
<SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da7: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da7: 1200.000MB/s transfers
da7: Command Queueing enabled
da7: 5723166MB (11721045168 512 byte sectors)
da9 at mpr0 bus 0 scbus0 target 19 lun 0
da9: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da9: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da9: 1200.000MB/s transfersda6: 5723166MB (11721045168 512 byte sectors)
da8 at mpr0 bus 0 scbus0 target 18 lun 0
da8: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da8: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da8: 1200.000MB/s transfers
da8: Command Queueing enabled
da8: 5723166MB (11721045168 512 byte sectors)
da14 at mps0 bus 0 scbus1 target 9 lun 0
da9: Command Queueing enabled
da9: 5723166MB (11721045168 512 byte sectors)
da10 at mps0 bus 0 scbus1 target 0 lun 0
da10: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da10: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 5723166MB (11721045168 512 byte sectors)
da14: <SEAGATE ST6000NM0034 E005> Fixed Direct Access SPC-4 SCSI device
da14: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da14: 600.000MB/s transfers
da14: Command Queueing enabled
da14: 5723166MB (11721045168 512 byte sectors)
da11 at mps0 bus 0 scbus1 target 1 lun 0
da11: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da11: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da10: quirks=0x8<4K>
da12 at mps0 bus 0 scbus1 target 2 lun 0
da12: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da12: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da12: 600.000MB/s transfers
da12: Command Queueing enabled
da12: 5723166MB (11721045168 512 byte sectors)
da12: quirks=0x8<4K>
da11: 600.000MB/s transfers
da11: Command Queueing enabled
da11: 5723166MB (11721045168 512 byte sectors)
da11: quirks=0x8<4K>
da13 at mps0 bus 0 scbus1 target 4 lun 0
da13: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da13: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da13: 600.000MB/s transfers
da13: Command Queueing enabled
da13: 5723166MB (11721045168 512 byte sectors)
da13: quirks=0x8<4K>
ses0 at mpr0 bus 0 scbus0 target 32 lun 0
ses0: <LSI SAS3x40 0601> Fixed Enclosure Services SPC-3 SCSI device
ses0: 1200.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 ENC Device
ses1 at mpr0 bus 0 scbus0 target 71 lun 0
ses1: <LSI SAS3x36 0601> Fixed Enclosure Services SPC-3 SCSI device
ses1: 1200.000MB/s transfers
ses1: Command Queueing enabled
ses1: SCSI-3 ENC Device
ses0: da0,pass0: Element descriptor: 'Slot00'
ses0: da0,pass0: SAS Device Slot Element: 1 Phys at Slot 0
ses2 at ahciem0 bus 0 scbus10 target 0 lun 0
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009781b055
ses2: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses2: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD60EFRX-68MYMN1 82.00A82> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 5723166MB (11721045168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <TS64GSSD370S O0918B> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada1: Command Queueing enabled
ada1: 61057MB (125045424 512 byte sectors)
ada2 at ahcich2 bus 0 scbus4 target 0 lun 0
ada2: <TS64GSSD370S O0918B> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada2: Command Queueing enabled
ada2: 61057MB (125045424 512 byte sectors)
ada3 at ahcich3 bus 0 scbus5 target 0 lun 0
GEOM_MIRRORada3: <WDC WD60EFRX-68MYMN1 82.00A82> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
: Device mirror/bootssd launched (2/2).
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 5723166MB (11721045168 512 byte sectors)
ada3: quirks=0x1<4K>
ada4 at ahcich4 bus 0 scbus6 target 0 lun 0
ada4: <WDC WD60EFRX-68MYMN1 82.00A82> ACS-2 ATA SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 5723166MB (11721045168 512 byte sectors)
ada4: quirks=0x1<4K>
ada5 at ahcich5 bus 0 scbus7 target 0 lun 0
ada5: <WDC WD60EFRX-68MYMN1 82.00A82> ACS-2 ATA SATA 3.x device
ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 5723166MB (11721045168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ahcich6 bus 0 scbus8 target 0 lun 0
ada6: <WDC WD60EFRX-68MYMN1 82.00A82> ACS-2 ATA SATA 3.x device
ada6: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 5723166MB (11721045168 512 byte sectors)
ada6: quirks=0x1<4K>
ada7 at ahcich7 bus 0 scbus9 target 0 lun 0
ses0: da1,pass1: Element descriptor: 'Slot01'
ada7: <WDC WD60EFRX-68MYMN1 82.00A82> ACS-2 ATA SATA 3.x device
ada7: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada7: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada7: Command Queueing enabled
ada7: 5723166MB (11721045168 512 byte sectors)
ada7: quirks=0x1<4K>
ses0: da1,pass1: SAS Device Slot Element: 1 Phys at Slot 1
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009781be81
ses0: da2,pass2: Element descriptor: 'Slot02'
ses0: da2,pass2: SAS Device Slot Element: 1 Phys at Slot 2
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009781ae9d
ses0: da3,pass3: Element descriptor: 'Slot03'
ses0: da3,pass3: SAS Device Slot Element: 1 Phys at Slot 3
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c50097861709
ses0: da4,pass4: Element descriptor: 'Slot04'
ses0: da4,pass4: SAS Device Slot Element: 1 Phys at Slot 4
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c500976d6d15
ses0: da5,pass5: Element descriptor: 'Slot05'
ses0: da5,pass5: SAS Device Slot Element: 1 Phys at Slot 5
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c50097736525
ses0: da6,pass6: Element descriptor: 'Slot08'
ses0: da6,pass6: SAS Device Slot Element: 1 Phys at Slot 8
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009781be81
ses0: da2,pass2: Element descriptor: 'Slot02'
ses0: da2,pass2: SAS Device Slot Element: 1 Phys at Slot 2
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009781ae9d
ses0: da3,pass3: Element descriptor: 'Slot03'
ses0: da3,pass3: SAS Device Slot Element: 1 Phys at Slot 3
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c50097861709
ses0: da4,pass4: Element descriptor: 'Slot04'
ses0: da4,pass4: SAS Device Slot Element: 1 Phys at Slot 4
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c500976d6d15
ses0: da5,pass5: Element descriptor: 'Slot05'
ses0: da5,pass5: SAS Device Slot Element: 1 Phys at Slot 5
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c50097736525
ses0: da6,pass6: Element descriptor: 'Slot08'
ses0: da6,pass6: SAS Device Slot Element: 1 Phys at Slot 8
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c50097861929
ses0: da7,pass7: Element descriptor: 'Slot09'
ses0: da7,pass7: SAS Device Slot Element: 1 Phys at Slot 9
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009781c565
ses0: da8,pass8: Element descriptor: 'Slot10'
ses0: da8,pass8: SAS Device Slot Element: 1 Phys at Slot 10
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c5009772c601
ses0: da9,pass9: Element descriptor: 'Slot11'
ses0: da9,pass9: SAS Device Slot Element: 1 Phys at Slot 11
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 500304801eb15bbf addr 5000c50097733b89
Trying to mount root from ufs:/dev/mirror/bootssd [rw]...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lagg0: link state changed to DOWN
ums0 on uhub1
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
em0: link state changed to UP
ix1: link state changed to UP