Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-07 01:15:48
From: zao
Description: HP ML10 v2 w/ Mellanox ConnectX-2
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) CPU G3240 @ 3.10GHz (3092.90-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16570556416 (15802 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1546451620 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfacf0000-0xfacfffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xface0000-0xface03ff irq 21 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0:3:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xf9ff0000-0xf9ffffff,0xf9fe0000-0xf9feffff,0xf9fd0000-0xf9fdffff irq 17 at device 0.0 on pci5
bge0: APE FW version: NCSI v1.3.16.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
pci0:3:0:1: failed to read VPD data.
bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xf9fc0000-0xf9fcffff,0xf9fb0000-0xf9fbffff,0xf9fa0000-0xf9faffff irq 18 at device 0.1 on pci5
bge1: APE FW version: NCSI v1.3.16.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfbee0000-0xfbee3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci7
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 on pci7
usbus2 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfacd0000-0xfacd03ff irq 20 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0x1000-0x1007,0x1008-0x100b,0x1010-0x1017,0x1018-0x101b,0x1020-0x103f mem 0xfacc0000-0xfacc07ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
ppc0: cannot reserve I/O port range
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 23df00001f00
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 23df00001f00
device_attach: est1 attach returned 6
Timecounters tick every 1.000 msec
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen2.1: <HP UHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <MB2000EBZQC HPG2> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <MB2000EBZQC HPG2> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD30EFRX-68EUZN0 80.00A80> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors)
ada3: quirks=0x1<4K>
mlx4_core0: <mlx4_core> mem 0xfbf00000-0xfbffffff,0xfa000000-0xfa7fffff irq 16 at device 0.0 on pci1
mlx4_core: Mellanox ConnectX core driver v3.4.1 (October 2017)
mlx4_core: Initializing mlx4_core
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 21 ports with 21 removable, self powered
mlx4_core0: Unable to determine PCI device chain minimum BW
mlx4_en mlx4_core0: Activating port:1
mlxen0: Ethernet address: [_MAC_XXXXXXXXXX]
mlx4_en: mlx4_core0: Port 1: Using 2 TX rings
mlxen0: link state changed to DOWN
mlx4_en: mlx4_core0: Port 1: Using 4 RX rings
mlx4_en: mlxen0: Using 2 TX rings
mlx4_en: mlxen0: Using 4 RX rings
mlx4_en: mlxen0: Initializing port
Trying to mount root from ufs:/dev/ufsid/5a021e97f22e7585 [rw]...
Root mount waiting for: usbus3 usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8000> at usbus3
uhub5 on uhub0
uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus3
uhub4: 4 ports with 4 removable, self powered
ugen0.2: <Logitech HID compliant keyboard> at usbus0
ukbd0 on uhub3
ukbd0: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 1> on usbus0
kbd2 at ukbd0
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: usbus0
mlx4_en: mlxen0: Link Down
ugen0.3: <SanDisk Ultra Fit> at usbus0
umass0 on uhub3
umass0: <SanDisk Ultra Fit, class 0/0, rev 3.00/1.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:7:0: Attached to scbus7
mountroot: waiting for device /dev/ufsid/5a021e97f22e7585...
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 59232MB (121307136 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
random: unblocking device.
bge0: link state changed to DOWN
mlxen0: link state changed to UP
uhid0 on uhub3
uhid0: <Logitech HID compliant keyboard, class 0/0, rev 1.10/1.80, addr 1> on usbus0