Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 03:33:14
From: yuripv
Description: Supermicro X9DRI
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #0 r339193: Fri Oct 5 13:56:39 MSK 2018
[_EMAIL_XXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz (2200.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE
,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 274877906944 (262144 MB)
avail memory = 267769262080 (255364 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs
FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 34 35 23 16 6 4 1 8 29 25 18 17 10 15 37 38 11 28 21 30 31 14 5 36 32 20 33 13 19 2 7 22 9 12 3 39 24 27 26
Timecounter "TSC-low" frequency 1100025348 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810e2d60, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd0 at kbdmux0
netmap: loaded module
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
mps0: <Avago Technologies (LSI) SAS2008> port 0x8000-0x80ff mem 0xcf600000-0xcf603fff,0xcf580000-0xcf5bffff irq 40 at device 0.0 numa-domain 0 on pci4
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
ioat0: <IVB IOAT Ch0> mem 0xcf81c000-0xcf81ffff irq 31 at device 4.0 numa-domain 0 on pci0
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <IVB IOAT Ch1> mem 0xcf818000-0xcf81bfff irq 39 at device 4.1 numa-domain 0 on pci0
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <IVB IOAT Ch2> mem 0xcf814000-0xcf817fff irq 31 at device 4.2 numa-domain 0 on pci0
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <IVB IOAT Ch3> mem 0xcf810000-0xcf813fff irq 39 at device 4.3 numa-domain 0 on pci0
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <IVB IOAT Ch4> mem 0xcf80c000-0xcf80ffff irq 31 at device 4.4 numa-domain 0 on pci0
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <IVB IOAT Ch5> mem 0xcf808000-0xcf80bfff irq 39 at device 4.5 numa-domain 0 on pci0
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <IVB IOAT Ch6> mem 0xcf804000-0xcf807fff irq 31 at device 4.6 numa-domain 0 on pci0
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <IVB IOAT Ch7> mem 0xcf800000-0xcf803fff irq 39 at device 4.7 numa-domain 0 on pci0
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xcf823000-0xcf8233ff irq 16 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7060-0x707f mem 0xcf760000-0xcf77ffff,0xcf78c000-0xcf78ffff irq 16 at device 0.0 numa-domain 0 on pci6
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 10 queue msgs: 9 admincnt: 1
igb0: using 8 rx queues 8 tx queues
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7040-0x705f mem 0xcf740000-0xcf75ffff,0xcf788000-0xcf78bfff irq 17 at device 0.1 numa-domain 0 on pci6
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 10 queue msgs: 9 admincnt: 1
igb1: using 8 rx queues 8 tx queues
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7020-0x703f mem 0xcf720000-0xcf73ffff,0xcf784000-0xcf787fff irq 18 at device 0.2 numa-domain 0 on pci6
igb2: attach_pre capping queues at 8
igb2: using 1024 tx descriptors and 1024 rx descriptors
igb2: msix_init qsets capped at 8
igb2: pxm cpus: 10 queue msgs: 9 admincnt: 1
igb2: using 8 rx queues 8 tx queues
igb2: Using MSIX interrupts with 9 vectors
igb2: allocated for 8 tx_queues
igb2: allocated for 8 rx_queues
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb2: netmap queues/slots: TX 8/1024, RX 8/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7000-0x701f mem 0xcf700000-0xcf71ffff,0xcf780000-0xcf783fff irq 19 at device 0.3 numa-domain 0 on pci6
igb3: attach_pre capping queues at 8
igb3: using 1024 tx descriptors and 1024 rx descriptors
igb3: msix_init qsets capped at 8
igb3: pxm cpus: 10 queue msgs: 9 admincnt: 1
igb3: using 8 rx queues 8 tx queues
igb3: Using MSIX interrupts with 9 vectors
igb3: allocated for 8 tx_queues
igb3: allocated for 8 rx_queues
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: netmap queues/slots: TX 8/1024, RX 8/1024
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xcf822000-0xcf8223ff irq 23 at device 29.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
vgapci0: <VGA-compatible display> mem 0xcd000000-0xcdffffff,0xcf000000-0xcf003fff,0xce800000-0xceffffff irq 16 at device 1.0 numa-domain 0 on pci7
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xcf821000-0xcf8217ff irq 18 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib8: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pci8: <dasp, performance counters> at device 14.1 (no driver attached)
pci8: <dasp, performance counters> at device 19.1 (no driver attached)
pci8: <dasp, performance counters> at device 19.5 (no driver attached)
pcib9: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci9: <ACPI PCI bus> numa-domain 1 on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 51 at device 1.0 numa-domain 1 on pci9
pci10: <ACPI PCI bus> numa-domain 1 on pcib10
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0xf000-0xf0ff mem 0xfbe40000-0xfbe43fff irq 50 at device 0.0 numa-domain 1 on pci10
isp0: Polled Mailbox Command (0x8) Timeout (5000000us) (isp_reset:961)
isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
isp0: isp_reinit: cannot reset card
device_attach: isp0 attach returned 6
pcib11: <ACPI PCI-PCI bridge> irq 57 at device 2.0 numa-domain 1 on pci9
pci11: <ACPI PCI bus> numa-domain 1 on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 65 at device 3.0 numa-domain 1 on pci9
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
ioat8: <IVB IOAT Ch0> mem 0xfbf1c000-0xfbf1ffff irq 55 at device 4.0 numa-domain 1 on pci9
ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat9: <IVB IOAT Ch1> mem 0xfbf18000-0xfbf1bfff irq 63 at device 4.1 numa-domain 1 on pci9
ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat10: <IVB IOAT Ch2> mem 0xfbf14000-0xfbf17fff irq 55 at device 4.2 numa-domain 1 on pci9
ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat11: <IVB IOAT Ch3> mem 0xfbf10000-0xfbf13fff irq 63 at device 4.3 numa-domain 1 on pci9
ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat12: <IVB IOAT Ch4> mem 0xfbf0c000-0xfbf0ffff irq 55 at device 4.4 numa-domain 1 on pci9
ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat13: <IVB IOAT Ch5> mem 0xfbf08000-0xfbf0bfff irq 63 at device 4.5 numa-domain 1 on pci9
ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat14: <IVB IOAT Ch6> mem 0xfbf04000-0xfbf07fff irq 55 at device 4.6 numa-domain 1 on pci9
ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat15: <IVB IOAT Ch7> mem 0xfbf00000-0xfbf03fff irq 63 at device 4.7 numa-domain 1 on pci9
ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci13: <ACPI PCI bus> numa-domain 1 on pcib13
pci13: <dasp, performance counters> at device 14.1 (no driver attached)
pci13: <dasp, performance counters> at device 19.1 (no driver attached)
pci13: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 numa-domain 0 on uhub3
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd1 at ukbd0
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSC2CW060A3 400i> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 57241MB (117231408 512 byte sectors)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <OCZ-AGILITY4[_IP_XX]> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 61057MB (125045424 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 11 lun 0
da3: <ATA WDC WD10EZEX-21W 1A01> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 953869MB (1953525168 512 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
da1 at mps0 bus 0 scbus0 target 3 lun 0
da1: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 10 lun 0
da2: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 953869MB (1953525168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 2 lun 0
da0: <ATA WDC WD1002FAEX-0 1D05> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors)
lo0: link state changed to UP
Link state changed to up
igb0: link state changed to UP
ums0 numa-domain 0 on uhub3
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0