Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 03:55:18
From: jhibbits
Description: FreeBSD on AmigaOne X5000
---<<BOOT>>---
powerpc_smp_first_cpu: cpuid 0
powerpc_smp_next_cpu: cpuid 1
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #0 r339216M: Sat Oct 6 22:16:22 CDT 2018
[_EMAIL_XXXXXXXXXXXXXX]:/titan/scratch/chmeee/build/titan/scratch/chmeee/head/powerpc.powerpc64/sys/AMIGAX5000 powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT: init without driver.
cpu0: Freescale e5500 core revision 1.2, 1995.00 MHz
cpu0: Features cc009100<PPC32,PPC64,FPU,MMU,BOOKE,ARCH205,ARCH206>
cpu0: Features2 8000000<ISEL>
cpu0: HID0 c0000000<EMCP,EN_L2MMU_MHD>
real memory = 8499658752 (8105 MB)
available KVA = 34042208255 (32465 MB)
Physical memory chunk(s):
0x0000000000000000 - 0x0000000003fd3fff, 66928640 bytes (16340 pages)
0x0000000003fe9000 - 0x0000000003ffffff, 94208 bytes (23 pages)
0x0000000009600000 - 0x000000007ff34fff, 1989365760 bytes (485685 pages)
0x000000007ff36000 - 0x000000007fffefff, 823296 bytes (201 pages)
0x0000000080000000 - 0x00000000ffffefff, 2147479552 bytes (524287 pages)
0x0000000100000000 - 0x00000001f373afff, 4084445184 bytes (997179 pages)
avail memory = 8258613248 (7876 MB)
powerpc_smp_first_cpu: cpuid 0
powerpc_smp_next_cpu: cpuid 1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: dev=0 (BSP)
cpu1: dev=1
arc4random: no preloaded entropy cache
ULE: setup cpu 0
ULE: setup cpu 1
random: entropy device external interface
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
bman-portals0: <Freescale Buffer Manager - Portals> on ofwbus0
nexus mapdev: start ff4000000, len 16384
Wiring VA=4000000002000000 to PA=ff4000000 (size=4000)
nexus mapdev: start ff4100000, len 4096
Wiring VA=4000000002004000 to PA=ff4100000 (size=1000)
qman-portals0: <Freescale Queue Manager - Portals> on ofwbus0
nexus mapdev: start ff4200000, len 16384
Wiring VA=4000000002008000 to PA=ff4200000 (size=4000)
nexus mapdev: start ff4300000, len 4096
Wiring VA=400000000200c000 to PA=ff4300000 (size=1000)
simplebus1: <Flattened device tree simple bus> mem 0xffe000000-0xffe000fff on ofwbus0
fman0: <Freescale Frame Manager> mem 0x400000-0x4fffff irq 96,16 on simplebus1
nexus mapdev: start ffe400000, len 1048576
> INFO (__ERR_MODULE__) [CPU00, /titan/scratch/chmeee/head/sys/contrib/ncsw/Peripherals/FM/fm_ncsw.c:470 LoadFmanCtrlCode]: FMan-Controller code (ver 101.0.8) loaded to IRAM.
fman0: Hardware version: 3.0.
lbc0: <Freescale Local Bus Controller> mem 0xffe124000-0xffe124fff irq 25 on ofwbus0
nexus mapdev: start ffe124000, len 4096
lbc_attach(): par addr_cells = 2, addr_cells = 2, size_cells = 1, tuple_size = 20, tuples = 3
lbc_attach(): bank = 0, start = fe8000000, size = 8000000
lbc_attach(): bank = 2, start = fffa00000, size = 40000
lbc_attach(): bank = 3, start = fffdf0000, size = 8000
Wiring VA=4000000008000000 to PA=fe8000000 (size=4000000)
Wiring VA=400000000c000000 to PA=fec000000 (size=4000000)
Wiring VA=4000000010000000 to PA=fffa00000 (size=40000)
Wiring VA=4000000010040000 to PA=fffdf0000 (size=4000)
Wiring VA=4000000010044000 to PA=fffdf4000 (size=4000)
gpio0: <Freescale QorIQ GPIO driver> mem 0x130000-0x130fff irq 55 on simplebus1
nexus mapdev: start ffe130000, len 4096
gpiobus0: <GPIO bus> on gpio0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: Nominal frequency 1995Mhz
cpu1: <Open Firmware CPU> on cpulist0
cpu1: Nominal frequency 1995Mhz
simplebus0: <dcsr-epu@0> mem 0-0xfff irq 52,84,85 compat fsl,p5020-dcsr-epu (no driver attached)
simplebus0: <dcsr-npc> mem 0x1000-0x1fff,0x1000000-0x1007fff compat fsl,dcsr-npc (no driver attached)
simplebus0: <dcsr-nxc@2000> mem 0x2000-0x2fff compat fsl,dcsr-nxc (no driver attached)
simplebus0: <dcsr-corenet> mem 0x8000-0x8fff,0xb0000-0xb0fff compat fsl,dcsr-corenet (no driver attached)
simplebus0: <dcsr-dpaa@9000> mem 0x9000-0x9fff compat fsl,p5020-dcsr-dpaa (no driver attached)
simplebus0: <dcsr-ocn@11000> mem 0x11000-0x11fff compat fsl,p5020-dcsr-ocn (no driver attached)
simplebus0: <dcsr-ddr@12000> mem 0x12000-0x12fff compat fsl,dcsr-ddr (no driver attached)
simplebus0: <dcsr-ddr@13000> mem 0x13000-0x13fff compat fsl,dcsr-ddr (no driver attached)
simplebus0: <dcsr-nal@18000> mem 0x18000-0x18fff compat fsl,p5020-dcsr-nal (no driver attached)
simplebus0: <dcsr-rcpm@22000> mem 0x22000-0x22fff compat fsl,p5020-dcsr-rcpm (no driver attached)
simplebus0: <dcsr-cpu-sb-proxy@40000> mem 0x40000-0x40fff compat fsl,dcsr-e5500-sb-proxy (no driver attached)
simplebus0: <dcsr-cpu-sb-proxy@41000> mem 0x41000-0x41fff compat fsl,dcsr-e5500-sb-proxy (no driver attached)
spi0: <Freescale eSPI controller> mem 0x110000-0x110fff irq 53 on simplebus1
nexus mapdev: start ffe110000, len 4096
spibus0: <OFW SPI bus> on spi0
nexus mapdev: start ffe118100, len 256
nexus mapdev: start ffe118100, len 256
iichb0: <I2C bus controller> mem 0x118100-0x1181ff irq 38 on simplebus1
nexus mapdev: start ffe118100, len 256
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
nexus mapdev: start ffe119100, len 256
nexus mapdev: start ffe119100, len 256
iichb1: <I2C bus controller> mem 0x119100-0x1191ff irq 39 on simplebus1
nexus mapdev: start ffe119100, len 256
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
ds13070: <Microchip MCP7941x RTC> at addr 0xde on iicbus1
simplebus1: <soc-sram-error> irq 16 compat fsl,soc-sram-error (no driver attached)
simplebus1: <corenet-law@0> mem 0-0xfff compat fsl,corenet-law (no driver attached)
simplebus1: <memory-controller@8000> mem 0x8000-0x8fff irq 16 compat fsl,qoriq-memory-controller-v4.5 (no driver attached)
simplebus1: <memory-controller@9000> mem 0x9000-0x9fff irq 16 compat fsl,qoriq-memory-controller-v4.5 (no driver attached)
simplebus1: <l3-cache-controller@10000> mem 0x10000-0x10fff,0x11000-0x11fff irq 16,16 compat fsl,p5020-l3-cache-controller (no driver attached)
simplebus1: <corenet-cf@18000> mem 0x18000-0x18fff irq 16 compat fsl,corenet1-cf (no driver attached)
simplebus1: <iommu@20000> mem 0x20000-0x23fff irq 24,16 compat fsl,pamu-v1.0 (no driver attached)
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on simplebus1
nexus mapdev: start ffe040000, len 262144
openpic0: Version 1.2, supports 2 CPUs and 196 irqs
simplebus1: <timer@41100> mem 0x41100-0x411ff,0x41300-0x41303 irq 0,1,2,3 compat fsl,mpic-global-timer (no driver attached)
simplebus1: <msi@41600> mem 0x41600-0x417ff,0x44140-0x44143 irq 224,225,226,227,228,229,230,231 compat fsl,mpic-msi (no driver attached)
simplebus1: <msi@41800> mem 0x41800-0x419ff,0x45140-0x45143 irq 232,233,234,235,236,237,238,239 compat fsl,mpic-msi (no driver attached)
simplebus1: <msi@41a00> mem 0x41a00-0x41bff,0x46140-0x46143 irq 240,241,242,243,244,245,246,247 compat fsl,mpic-msi (no driver attached)
simplebus1: <timer@42100> mem 0x42100-0x421ff,0x42300-0x42303 irq 4,5,6,7 compat fsl,mpic-global-timer (no driver attached)
simplebus1: <global-utilities@e0000> mem 0xe0000-0xe0dff compat fsl,qoriq-device-config-1.0 (no driver attached)
simplebus1: <global-utilities@e0e00> mem 0xe0e00-0xe0fff compat fsl,qoriq-pin-control-1.0 (no driver attached)
simplebus1: <global-utilities@e1000> mem 0xe1000-0xe1fff compat fsl,p5020-clockgen (no driver attached)
simplebus1: <global-utilities@e2000> mem 0xe2000-0xe2fff compat fsl,qoriq-rcpm-1.0 (no driver attached)
simplebus1: <sfp@e8000> mem 0xe8000-0xe8fff compat fsl,p5020-sfp (no driver attached)
simplebus1: <serdes@ea000> mem 0xea000-0xeafff compat fsl,p5020-serdes (no driver attached)
simplebus1: <dma@100300> mem 0x100300-0x100303 compat fsl,eloplus-dma (no driver attached)
simplebus1: <dma@101300> mem 0x101300-0x101303 compat fsl,eloplus-dma (no driver attached)
sdhci_fsl0: <Freescale eSDHC controller> mem 0x114000-0x114fff irq 48 on simplebus1
nexus mapdev: start ffe114000, len 4096
sdhci_fsl0: Acquired clock: 399000000 from DTS
sdhci_fsl0-slot0: 399MHz HS 8bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
sdhci_fsl0-slot0: ============== REGISTER DUMP ==============
sdhci_fsl0-slot0: Sys addr: 0x7fe43598 | Version: 0x00000000
sdhci_fsl0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000000
sdhci_fsl0-slot0: Argument: 0x0008d400 | Trn mode: 0x00000000
sdhci_fsl0-slot0: Present: 0x00fd0000 | Host ctl: 0x00000002
sdhci_fsl0-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_fsl0-slot0: Wake-up: 0x00000000 | Clock: 0x00000007
sdhci_fsl0-slot0: Timeout: 0x0000000b | Int stat: 0x00000000
sdhci_fsl0-slot0: Int enab: 0x137f01cf | Sig enab: 0x00000000
sdhci_fsl0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_fsl0-slot0: Caps: 0x01760000 | Caps2: 0x08000800
sdhci_fsl0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_fsl0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_fsl0-slot0: ===========================================
sdhci_fsl0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_fsl0
nexus mapdev: start ffe118000, len 256
nexus mapdev: start ffe118000, len 256
iichb2: <I2C bus controller> mem 0x118000-0x1180ff irq 38 on simplebus1
nexus mapdev: start ffe118000, len 256
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
nexus mapdev: start ffe119000, len 256
nexus mapdev: start ffe119000, len 256
iichb3: <I2C bus controller> mem 0x119000-0x1190ff irq 39 on simplebus1
nexus mapdev: start ffe119000, len 256
iicbus3: <OFW I2C bus> on iichb3
iic3: <I2C generic I/O> on iicbus3
nexus mapdev: start ffe11c500, len 256
nexus mapdev: start ffe11c500, len 256
uart0: <16550 or compatible> mem 0x11c500-0x11c5ff irq 36 on simplebus1
nexus mapdev: start ffe11c500, len 256
uart0: console (115451,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
nexus mapdev: start ffe11c600, len 256
nexus mapdev: start ffe11c600, len 256
uart1: <16550 or compatible> mem 0x11c600-0x11c6ff irq 36 on simplebus1
nexus mapdev: start ffe11c600, len 256
uart1: fast interrupt
uart1: PPS capture mode: DCD
nexus mapdev: start ffe11d500, len 256
nexus mapdev: start ffe11d500, len 256
uart2: <16550 or compatible> mem 0x11d500-0x11d5ff irq 37 on simplebus1
nexus mapdev: start ffe11d500, len 256
uart2: fast interrupt
uart2: PPS capture mode: DCD
nexus mapdev: start ffe11d600, len 256
nexus mapdev: start ffe11d600, len 256
uart3: <16550 or compatible> mem 0x11d600-0x11d6ff irq 37 on simplebus1
nexus mapdev: start ffe11d600, len 256
uart3: fast interrupt
uart3: PPS capture mode: DCD
gpioc0: <GPIO controller> on gpio0
ehci0: <Freescale integrated EHCI controller> mem 0x210000-0x210fff irq 44 on simplebus1
nexus mapdev: start ffe210000, len 4096
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
ehci1: <Freescale integrated EHCI controller> mem 0x211000-0x211fff irq 45 on simplebus1
nexus mapdev: start ffe211000, len 4096
usbus1: EHCI version 1.0
usbus1 on ehci1
ehci1: usbpf: Attached
fslsata0: <Freescale Integrated SATA Controller> mem 0x220000-0x220fff irq 68 on simplebus1
nexus mapdev: start ffe220000, len 4096
fslsata0: work area: 0xe00000002e68f000
fslsata1: <Freescale Integrated SATA Controller> mem 0x221000-0x221fff irq 69 on simplebus1
nexus mapdev: start ffe221000, len 4096
fslsata1: work area: 0xe000000071879000
simplebus1: <sec_mon@314000> mem 0x314000-0x314fff irq 93 compat fsl,sec-v4.2-mon (no driver attached)
qman0: <Freescale Queue Manager> mem 0x318000-0x318fff irq 16 on simplebus1
nexus mapdev: start ffe318000, len 4096
qman0: Hardware version: 1.2.
bman0: <Freescale Buffer Manager> mem 0x31a000-0x31afff irq 16 on simplebus1
nexus mapdev: start ffe31a000, len 4096
bman0: Hardware version: 1.0.
simplebus1: <raideng@320000> mem 0x320000-0x32ffff compat fsl,raideng-v1.0 (no driver attached)
fman0: <fman-firmware> compat fsl,fman-firmware (no driver attached)
fman0: <muram@0> mem 0-0x27fff compat fsl,fman-muram (no driver attached)
fman0: <port@81000> mem 0x81000-0x81fff compat fsl,fman-v2-port-oh (no driver attached)
fman0: <port@82000> mem 0x82000-0x82fff compat fsl,fman-v2-port-oh (no driver attached)
fman0: <port@83000> mem 0x83000-0x83fff compat fsl,fman-v2-port-oh (no driver attached)
fman0: <port@84000> mem 0x84000-0x84fff compat fsl,fman-v2-port-oh (no driver attached)
fman0: <port@85000> mem 0x85000-0x85fff disabled compat fsl,fman-v2-port-oh (no driver attached)
fman0: <port@86000> mem 0x86000-0x86fff disabled compat fsl,fman-v2-port-oh (no driver attached)
fman0: <port@87000> mem 0x87000-0x87fff disabled compat fsl,fman-v2-port-oh (no driver attached)
fman0: <ptp-timer@fe000> mem 0xfe000-0xfefff compat fsl,fman-ptp-timer (no driver attached)
fman0: <port@88000> mem 0x88000-0x88fff compat fsl,fman-v2-port-rx (no driver attached)
fman0: <port@a8000> mem 0xa8000-0xa8fff compat fsl,fman-v2-port-tx (no driver attached)
dtsec0: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe0000-0xe0fff on fman0
device_attach: dtsec0 attach returned 6
pq_mdio0: <Freescale QorIQ MDIO> mem 0xe1120-0xe1fff irq 100 on fman0
fman0: <port@89000> mem 0x89000-0x89fff compat fsl,fman-v2-port-rx (no driver attached)
fman0: <port@a9000> mem 0xa9000-0xa9fff compat fsl,fman-v2-port-tx (no driver attached)
dtsec0: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe2000-0xe2fff on fman0
device_attach: dtsec0 attach returned 6
pq_mdio1: <Freescale QorIQ MDIO> mem 0xe3120-0xe3fff on fman0
fman0: <port@8a000> mem 0x8a000-0x8afff compat fsl,fman-v2-port-rx (no driver attached)
fman0: <port@aa000> mem 0xaa000-0xaafff compat fsl,fman-v2-port-tx (no driver attached)
dtsec0: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe4000-0xe4fff on fman0
dtsec0: Could not load local-mac-addr property from DTS
device_attach: dtsec0 attach returned 6
pq_mdio2: <Freescale QorIQ MDIO> mem 0xe5120-0xe5fff on fman0
fman0: <port@8b000> mem 0x8b000-0x8bfff compat fsl,fman-v2-port-rx (no driver attached)
fman0: <port@ab000> mem 0xab000-0xabfff compat fsl,fman-v2-port-tx (no driver attached)
dtsec0: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe6000-0xe6fff on fman0
dtsec0: Configured for regular mode.
dtsec0: TX hw port 0xab000 initialized.
dtsec0: RX hw port 0x8b000 initialized.
miibus0: <MII bus> on dtsec0
micphy0: <Micrel KSZ9021 10/100/1000 PHY> PHY 3 on miibus0
micphy0: OUI 0x0010a1, model 0x0021, rev. 1
micphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dtsec0: bpf attached
dtsec0: Ethernet address: [_MAC_XXXXXXXXXX]
pq_mdio3: <Freescale QorIQ MDIO> mem 0xe7120-0xe7fff on fman0
fman0: <port@8c000> mem 0x8c000-0x8cfff compat fsl,fman-v2-port-rx (no driver attached)
fman0: <port@ac000> mem 0xac000-0xacfff compat fsl,fman-v2-port-tx (no driver attached)
dtsec1: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xe8000-0xe8fff on fman0
dtsec1: Configured for regular mode.
dtsec1: TX hw port 0xac000 initialized.
dtsec1: RX hw port 0x8c000 initialized.
miibus1: <MII bus> on dtsec1
micphy1: <Micrel KSZ9021 10/100/1000 PHY> PHY 7 on miibus1
micphy1: OUI 0x0010a1, model 0x0021, rev. 1
micphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
dtsec1: bpf attached
dtsec1: Ethernet address: [_MAC_XXXXXXXXXX]
pq_mdio4: <Freescale QorIQ MDIO> mem 0xe9120-0xe9fff on fman0
fman0: <port@90000> mem 0x90000-0x90fff compat fsl,fman-v2-port-rx (no driver attached)
fman0: <port@b0000> mem 0xb0000-0xb0fff compat fsl,fman-v2-port-tx (no driver attached)
dtsec2: <Freescale Data Path Triple Speed Ethernet Controller> mem 0xf0000-0xf0fff on fman0
dtsec2: Could not load local-mac-addr property from DTS
device_attach: dtsec2 attach returned 6
fman0: <mdio@f1000> mem 0xf1000-0xf1fff irq 101 compat fsl,fman-xmdio (no driver attached)
ofwbus0: <rapidio@ffe0c0000> mem 0xffe0c0000-0xffe0d0fff irq 16 compat fsl,srio (no driver attached)
pcib0: <Freescale Integrated PCI/PCI-E Controller> mem 0xffe200000-0xffe200fff irq 16 on ofwbus0
nexus mapdev: start ffe200000, len 4096
PCI: reading firmware bus numbers for secbus = 1 (bus/sec/sub) = (0/0/0)
PCI: translate firmware bus numbers for secbus 1 (0/0/0) -> (0/1/1)
PCI 0: no PCIE link, skipping
pcib1: <Freescale Integrated PCI/PCI-E Controller> mem 0xffe201000-0xffe201fff irq 16 on ofwbus0
nexus mapdev: start ffe201000, len 4096
PCI: reading firmware bus numbers for secbus = 1 (bus/sec/sub) = (0/1/8)
PCI: reading firmware bus numbers for secbus = 2 (bus/sec/sub) = (1/2/8)
PCI: reading firmware bus numbers for secbus = 3 (bus/sec/sub) = (2/3/4)
PCI: reading firmware bus numbers for secbus = 4 (bus/sec/sub) = (3/4/4)
PCI: translate firmware bus numbers for secbus 4 (3/4/4) -> (3/4/4)
PCI: translate firmware bus numbers for secbus 4 (2/3/4) -> (2/3/4)
PCI: reading firmware bus numbers for secbus = 5 (bus/sec/sub) = (2/5/5)
PCI: translate firmware bus numbers for secbus 5 (2/5/5) -> (2/5/5)
PCI: reading firmware bus numbers for secbus = 6 (bus/sec/sub) = (2/6/6)
PCI: translate firmware bus numbers for secbus 6 (2/6/6) -> (2/6/6)
PCI: reading firmware bus numbers for secbus = 7 (bus/sec/sub) = (2/7/7)
PCI: translate firmware bus numbers for secbus 7 (2/7/7) -> (2/7/7)
PCI: reading firmware bus numbers for secbus = 8 (bus/sec/sub) = (2/8/8)
PCI: translate firmware bus numbers for secbus 8 (2/8/8) -> (2/8/8)
PCI: translate firmware bus numbers for secbus 8 (1/2/8) -> (1/2/8)
PCI: translate firmware bus numbers for secbus 8 (0/1/8) -> (0/1/8)
pci0: <OFW PCI bus> on pcib1
pci0: domain=1, physical bus=0
found-> vendor=0x1957, dev=0x0421, revid=0x20
domain=1, bus=0, slot=0, func=0
class=0b-20-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D1 D2 D3 current D0
pcib2 irq 16 at device 0.0 on pci0
pcib2: domain 1
pcib2: secondary bus 1
pcib2: subordinate bus 8
pci1: <OFW PCI bus> on pcib2
pci1: domain=1, physical bus=1
found-> vendor=0x111d, dev=0x8092, revid=0x02
domain=1, bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
pcib3: <PCI-PCI bridge> at device 0.0 on pci1
pcib3: domain 1
pcib3: secondary bus 2
pcib3: subordinate bus 8
pci2: <PCI bus> on pcib3
pci2: domain=1, physical bus=2
found-> vendor=0x111d, dev=0x8092, revid=0x02
domain=1, bus=2, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x111d, dev=0x8092, revid=0x02
domain=1, bus=2, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x111d, dev=0x8092, revid=0x02
domain=1, bus=2, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x111d, dev=0x8092, revid=0x02
domain=1, bus=2, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x111d, dev=0x8092, revid=0x02
domain=1, bus=2, slot=16, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: <PCI-PCI bridge> at device 1.0 on pci2
pcib4: domain 1
pcib4: secondary bus 3
pcib4: subordinate bus 4
pci3: <PCI bus> on pcib4
pci3: domain=1, physical bus=3
found-> vendor=0x12d8, dev=0xe111, revid=0x02
domain=1, bus=3, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib3: slot 1 INTA is routed to irq 5
pcib4: slot 0 INTA is routed to irq 5
pcib5: <PCI-PCI bridge> irq 5 at device 0.0 on pci3
pcib5: domain 1
pcib5: secondary bus 4
pcib5: subordinate bus 4
pci4: <PCI bus> on pcib5
pci4: domain=1, physical bus=4
pcib6: <PCI-PCI bridge> at device 2.0 on pci2
pcib6: domain 1
pcib6: secondary bus 5
pcib6: subordinate bus 5
pci5: <PCI bus> on pcib6
pci5: domain=1, physical bus=5
pcib7: <PCI-PCI bridge> at device 3.0 on pci2
pcib7: domain 1
pcib7: secondary bus 6
pcib7: subordinate bus 6
pci6: <PCI bus> on pcib7
pci6: domain=1, physical bus=6
pcib8: <PCI-PCI bridge> at device 8.0 on pci2
pcib8: domain 1
pcib8: secondary bus 7
pcib8: subordinate bus 7
pci7: <PCI bus> on pcib8
pci7: domain=1, physical bus=7
pcib9: <PCI-PCI bridge> at device 16.0 on pci2
pcib9: domain 1
pcib9: secondary bus 8
pcib9: subordinate bus 8
pci8: <PCI bus> on pcib9
pci8: domain=1, physical bus=8
gpiopower0: <GPIO poweroff control> on ofwbus0
gpiopower1: <GPIO restart control> on ofwbus0
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
procfs registered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounter "timebase" frequency 24937500 Hz quality 0
Event timer "decrementer" frequency 24937500 Hz quality 1000
Timecounters tick every 1.000 msec
crypto: <crypto device>
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ds13070: registered as a time-of-day clock, resolution 1.000000s
sdhci_fsl0-slot0: Divider 128 for freq 389648 (base 399000000)
sdhci_fsl0: desired SD freq: 1558593, actual: 1558593; base 399000000 prescale 16 divisor 16
mmc0: Probing bus
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
fslsata0: FSL SATA reset...
fslsata0: FSL SATA reset: device found
fslsata1: FSL SATA reset...
fslsata1: FSL SATA reset: device found
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x00ff8000)
mmc0: Current OCR: 0x00ff8000
mmc0: Probing cards
ada0 at fslsata0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 EVO 250GB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
mmc0: New card detected (CID 2842452020202020100000073400c900)
GEOM: new disk ada0
pass0 at fslsata0 bus 0 scbus0 target 0 lun 0
pass0: <Samsung SSD 840 EVO 250GB EXT0BB6Q> ACS-2 ATA SATA 3.x device
pass0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
pass0: Command Queueing enabled
mmc0: New card detected (CSD 005e00325f5983c7edb6ff8796400000)
pass1 at fslsata1 bus 0 scbus1 target 0 lun 0
pass1: <HL-DT-ST DVDRAM GH22NS50 TN04> Removable CD-ROM SCSI device
pass1: [_SERIAL_NUMBER_XXXXXXXX]
pass1: 150.000MB/s transfers (SATA 1.x, mmc0: Card at relative address 0xb368 added:
mmc0: card: SD 1.0 SN 00000734 MFG 09/2012 by 40 BE
mmc0: quirks: 0
mmc0: bus: 4bit, 50MHz (high speed timing)
mmc0: memory: 495616 blocks, erase sector 8192 blocks
UDMA5, ATAPI 12bytes, mmc0: setting transfer rate to 50.000MHz (high speed timing)
PIO 8192bytes)
sdhci_fsl0-slot0: Divider 4 for freq 49875000 (base 399000000)
sdhci_fsl0: desired SD freq: 49875000, actual: 49875000; base 399000000 prescale 2 divisor 4
mmcsd0: 254MB <SD 1.0 SN 00000734 MFG 09/2012 by 40 BE> at mmc0 49.8MHz/4bit/65535-block
Sending DHCP Discover packet from interface dtsec0 ([_MAC_XXXXXXXXXX])
Sending DHCP Discover packet from interface dtsec1 ([_MAC_XXXXXXXXXX])
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits high speed timing
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
dtsec0: link state changed to DOWN
dtsec1: link state changed to DOWN
ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub2: MTT enabled
ugen0.2: <vendor 0x0424 product 0x2514> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0
uhub3: MTT enabled
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
dtsec0: link state changed to UP
Received DHCP Offer packet on dtsec0 from[_IP_XXXXXX] (accepted)
Received DHCP Offer packet on dtsec0 from[_IP_XXXXXX] (ignored)
Received DHCP Offer packet on dtsec0 from[_IP_XXXXXX] (ignored)
Sending DHCP Request packet from interface dtsec0 ([_MAC_XXXXXXXXXX])
Received DHCP Ack packet on dtsec0 from[_IP_XXXXXX] (accepted)
DHCP timeout for interface dtsec1
dtsec0 at[_IP_XXXXXXX] server[_IP_XXXXXX]
subnet mask[_IP_XXXXXXXX] router[_IP_XXXXXX]
Adjusted interface dtsec0
Shutdown interface dtsec1
Adding CPU 0, hwref=0, awake=1
Waking up CPU 1 (dev=1)
Waking up CPU 1 via CPU release page 0xe00000002ebff200
Adding CPU 1, hwref=1, awake=1
SMP: AP CPU #1 launched