Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 08:19:03
From: Quip
Description: Cisco C200 M2
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-RELEASE-p11 #4: Sat Aug 25 20:12:22 CEST 2018
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5649 @ 2.53GHz (2533.47-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 25769803776 (24576 MB)
avail memory = 24867020800 (23715 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Cisco0 CiscoUCS>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 16
cpu7 (AP): APIC ID: 17
cpu8 (AP): APIC ID: 18
cpu9 (AP): APIC ID: 19
cpu10 (AP): APIC ID: 20
cpu11 (AP): APIC ID: 21
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <Cisco0 CiscoUCS> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 29 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 25 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 26 at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 27 at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 31 at device 8.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x20e0-0x20ff irq 19 at device 26.0 on pci0
uhci0: LegSup = 0x3000
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x20c0-0x20df irq 19 at device 26.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x20a0-0x20bf irq 19 at device 26.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xb1b22000-0xb1b223ff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib11
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1020-0x103f mem 0xb1960000-0xb197ffff,0xb1940000-0xb195ffff,0xb1a04000-0xb1a07fff irq 16 at device 0.0 on pci11
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1000-0x101f mem 0xb1920000-0xb193ffff,0xb1900000-0xb191ffff,0xb1a00000-0xb1a03fff irq 17 at device 0.1 on pci11
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 0
igb1: Bound queue 5 to cpu 1
igb1: Bound queue 6 to cpu 2
igb1: Bound queue 7 to cpu 3
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci14: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci14
vgapci0: Boot video device
pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci15: <ACPI PCI bus> on pcib13
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x2080-0x209f irq 16 at device 29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x2060-0x207f irq 16 at device 29.1 on pci0
usbus5 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x2040-0x205f irq 16 at device 29.2 on pci0
usbus6 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xb1b21000-0xb1b213ff irq 16 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib14
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0x2108-0x210f,0x2114-0x2117,0x2100-0x2107,0x2110-0x2113,0x2020-0x203f mem 0xb1b20000-0xb1b207ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Sleep Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_acad1: <AC Adapter> on acpi0
qpi0: <QPI system bus> on motherboard
pcib15: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib15
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ACPI Error: No handler for Region [POWS] (0xfffff800095d1080) [IPMI] (20160527/evregion-180)
ACPI Error: Region IPMI (ID=7) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB.PCI0.LPC0.P111._PSR] (Node 0xfffff800095b5640), AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: No handler for Region [POWS] (0xfffff800095d0e00) [IPMI] (20160527/evregion-180)
ACPI Error: Region IPMI (ID=7) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB.PCI0.LPC0.P112._PSR] (Node 0xfffff800095b5380), AE_NOT_EXIST (20160527/psparse-559)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000NM0011 SN03> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST1000NM0011 SN03> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: Previously was known as ad6
cd0 at ahcich5 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GT40N SL01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic16: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic17: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1266737012 Hz quality 1000
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub7: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
ugen7.2: <vendor 0x04b4 product 0x6560> at usbus7
uhub8: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2> on usbus7
uhub8: 4 ports with 4 removable, self powered
Root mount waiting for: usbus3
ugen1.2: <Avocent USB Composite Device-0> at usbus1
ukbd0: <Keyboard> on usbus1
kbd0 at ukbd0
ugen3.2: <Avocent USB Composite Device-1> at usbus3
Root mount waiting for: usbus3
umass0: <SCSI Transparent Interface 0> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:3:0:-1: Attached to scbus3
Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
cd1 at umass-sim0 bus 0 scbus3 target 0 lun 0
cd1: <Cisco Virtual CD/DVD 1.22> Removable CD-ROM SCSI device
cd1: 40.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd1: quirks=0x10<10_BYTE_ONLY>
da0 at umass-sim0 bus 0 scbus3 target 0 lun 1
da0: <Cisco Virtual FDD/HDD 1.22> Removable Direct Access SCSI device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus3 target 0 lun 2
da1: <Cisco Virtual Floppy 1.22> Removable Direct Access SCSI device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
ACPI Error: No handler for Region [POWS] (0xfffff800095d0e00) [IPMI] (20160527/evregion-180)
ACPI Error: Region IPMI (ID=7) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB.PCI0.LPC0.P112._PSR] (Node 0xfffff800095b5380), AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: No handler for Region [POWS] (0xfffff800095d1080) [IPMI] (20160527/evregion-180)
ACPI Error: Region IPMI (ID=7) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB.PCI0.LPC0.P111._PSR] (Node 0xfffff800095b5640), AE_NOT_EXIST (20160527/psparse-559)
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
ipmi0: IPMI device rev. 15, firmware rev. 1.04, version 2.0
ipmi0: Number of channels 0
ipmi0: Attached watchdog
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
ums0: <Mouse> on usbus1
ums0: 3 buttons and [Z] coordinates ID=0
ums1: <Mouse REL> on usbus1
ums1: 3 buttons and [XYZ] coordinates ID=0
igb0: link state changed to UP
ACPI Error: No handler for Region [POWS] (0xfffff800095d1080) [IPMI] (20160527/evregion-180)
ACPI Error: Region IPMI (ID=7) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB.PCI0.LPC0.P111._PSR] (Node 0xfffff800095b5640), AE_NOT_EXIST (20160527/psparse-559)
ACPI Error: No handler for Region [POWS] (0xfffff800095d0e00) [IPMI] (20160527/evregion-180)
ACPI Error: Region IPMI (ID=7) has no handler (20160527/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB.PCI0.LPC0.P112._PSR] (Node 0xfffff800095b5380), AE_NOT_EXIST (20160527/psparse-559)