Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 09:47:59
From: lyx
Description: FreeBSD/amd64 on Zotac ZBOX ID-41
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <Intel UHCI root HUB> at usbus3
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
uhub5: ada0: <KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
uhub0: 5 ports with 5 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub0
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
random: unblocking device.
uhub6: 4 ports with 4 removable, self powered
lo0: link state changed to UP
re0: link state changed to DOWN
uhub1: 8 ports with 8 removable, self powered
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 7 1 0 0 done
All buffers synced.
Uptime: 18d10h17m5s
umass0: detached
uhub6: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #23 r336479: Thu Jul 19 16:28:42 CEST 2018
wolfgang@demeter:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.75-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8254574592 (7872 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <080112 APIC1527>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1795746195 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff5580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <080112 XSDT1527> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
pcm0: ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
<Realtek ALC892 (Rear Analog)> at nid 20 and 24 on hdaa0
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <Intel EHCI root HUB> at usbus5
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
uhub2: 5 ports with 5 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub2
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
random: unblocking device.
uhub6: 4 ports with 4 removable, self powered
lo0: link state changed to UP
uhub5: 8 ports with 8 removable, self powered
re0: link state changed to UP
re0: link state changed to DOWN
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub5
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
pid 59167 (cmTC_3e452), uid 0: exited on signal 4 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 5 0 0 0 done
All buffers synced.
Uptime: 18d9h46m36s
umass0: detached
uhub6: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #24 r337421: Tue Aug 7 18:38:32 CEST 2018
wolfgang@demeter:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.74-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8254574592 (7872 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <080112 APIC1527>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1795739148 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff66c0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <080112 XSDT1527> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
hdaa0: ada0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
<KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
pcm0: ada0: 300.000MB/s transfers (SATA 2.x, <Realtek ALC892 (Rear Analog)>UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
random: unblocking device.
uhub0: 5 ports with 5 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub0
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
lo0: link state changed to UP
uhub6: 4 ports with 4 removable, self powered
uhub2: 8 ports with 8 removable, self powered
re0: link state changed to UP
re0: link state changed to DOWN
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub2
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
pid 62412 (cmTC_a9516), uid 0: exited on signal 4 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 6 5 0 0 done
All buffers synced.
Uptime: 8d4h51m37s
umass0: detached
uhub6: detached
Rebooting...
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #25 r337834: Wed Aug 15 13:34:26 CEST 2018
wolfgang@demeter:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.75-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8254574592 (7872 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <080112 APIC1527>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1795745097 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff7850, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <080112 XSDT1527> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub1: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
uhub5: ada0: <KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
uhub1: 5 ports with 5 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
random: unblocking device.
uhub5: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub1
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
uhub6: 4 ports with 4 removable, self powered
lo0: link state changed to UP
uhub0: 8 ports with 8 removable, self powered
re0: link state changed to DOWN
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub0
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
pid 52258 (cmTC_eb108), uid 0: exited on signal 4 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 7 7 1 0 0 done
All buffers synced.
Uptime: 7d15h42m32s
umass0: detached
uhub6: detached
Rebooting...
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #26 r338241: Thu Aug 23 10:18:36 CEST 2018
wolfgang@demeter:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.75-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8254574592 (7872 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <080112 APIC1527>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1795745106 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff7850, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <080112 XSDT1527> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
hdaa0: ada0: <KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
<Realtek ALC892 Audio Function Group>ada0: 300.000MB/s transfers at nid 1 on hdacc0
(SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
pcm0: ada0: 114473MB (234441648 512 byte sectors)
<Realtek ALC892 (Rear Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen5.1: <Intel EHCI root HUB> at usbus5
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub2: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: 5 ports with 5 removable, self powered
random: unblocking device.
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub2
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
lo0: link state changed to UP
uhub6: 4 ports with 4 removable, self powered
uhub3: 8 ports with 8 removable, self powered
re0: link state changed to UP
re0: link state changed to DOWN
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub3
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
All buffers synced.
Uptime: 12d6h53m54s
umass0: detached
uhub6: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #27 r338446: Mon Sep 3 23:29:51 CEST 2018
wolfgang@demeter:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.74-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8254574592 (7872 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <080112 APIC1527>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1795744881 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8910, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <080112 XSDT1527> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
pcm0: ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 300.000MB/s transfers<Realtek ALC892 (Rear Analog)> at nid 20 and 24 on hdaa0
(SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub4: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4:
5 ports with 5 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub4
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
random: unblocking device.
lo0: link state changed to UP
uhub6: 4 ports with 4 removable, self powered
uhub1: 8 ports with 8 removable, self powered
re0: link state changed to UP
re0: link state changed to DOWN
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
nfs server demeter.lyx:/usr/ports: not responding
nfs server demeter.lyx:/usr/ports: is alive again
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
All buffers synced.
Uptime: 25d2h5m10s
umass0: detached
uhub6: detached
Rebooting...
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0: Sun Sep 30 01:17:04 CEST 2018
[_EMAIL_XXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.74-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8254574592 (7872 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <080112 APIC1527>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1795740858 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <080112 XSDT1527> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
hdac0: <Intel 82801G HDA Controller> mem 0xfe8fc000-0xfe8fffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9ff000-0xfe9fffff irq 16 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros AR1111> mem 0xfea80000-0xfeafffff irq 17 at device 0.0 on pci2
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 626.5
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci3
vgapci0: Boot video device
hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcf7c000-0xfcf7ffff irq 19 at device 0.1 on pci3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8fbc00-0xfe8fbfff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebdfc00-0xfebdfcff irq 16 at device 11.0 on pci4
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xb880-0xb887,0xc400-0xc403,0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc1f mem 0xfe8fb800-0xfe8fbbff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC892 HDA CODEC> at cad 2 on hdac0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
hdaa0: ada0: <Realtek ALC892 Audio Function Group> at nid 1<KINGSTON SV300S37A120G 505ABBF0> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 300.000MB/s transfers on hdacc0
(SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
pcm0: ada0: 114473MB (234441648 512 byte sectors)
<Realtek ALC892 (Rear Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen2.1: <Intel UHCI root HUB> at usbus2
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub5: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 5 ports with 5 removable, self powered
random: unblocking device.
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub6 on uhub5
uhub6: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.00, addr 1> on usbus0
lo0: link state changed to UP
uhub6: 4 ports with 4 removable, self powered
uhub0: 8 ports with 8 removable, self powered
re0: link state changed to UP
re0: link state changed to DOWN
ugen5.2: <Generic USB2.0-CRW> at usbus5
umass0 on uhub0
umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP