Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 10:23:42
From: lyx
Description: FreeBSD/amd64 on Acer C720
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0: Sat Sep 29 20:09:13 CEST 2018
    wolfgang@faunus:/usr/obj/usr/src/sys/FAUNUS amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz (1396.80-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4301258752 (4102 MB)
avail memory = 1911369728 (1822 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
ioapic0 <Version 2.0> irqs 0-39 on motherboard
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1396800440 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f4b410, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x24> port 0x62,0x66 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> irq 37 on acpi0
acpi_button2: <Sleep Button> irq 38 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x183f mem 0xe0000000-0xe03fffff,0xd0000000-0xdfffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xe0510000-0xe0513fff at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xe0500000-0xe050ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <base peripheral, DMA controller> at device 21.0 (no driver attached)
ig4iic_pci0: <Intel Lynx Point-LP I2C Controller-1> mem 0xe051a000-0xe051afff,0xe051b000-0xe051bfff at device 21.1 on pci0
ig4iic_pci0: Using MSI
ig4iic_pci1: <Intel Lynx Point-LP I2C Controller-2> mem 0xe051c000-0xe051cfff,0xe051d000-0xe051dfff at device 21.2 on pci0
ig4iic_pci1: Using MSI
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xe0514000-0xe0517fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ath0: <Atheros AR946x/AR948x> mem 0xe0400000-0xe047ffff at device 0.0 on pci1
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] LDPC transmit/receive enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9460 mac 640.2 RF5110 phy 610.2
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xe051f800-0xe051fbff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x1860-0x1867,0x1870-0x1873,0x1868-0x186f,0x1874-0x1877,0x1840-0x185f mem 0xe051f000-0xe051f7ff irq 22 at device 31.2 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
uart0: <8250 or 16450 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
pcm0: ada0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
<KINGSTON SNS4151S316G S9FM01.1> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
iicbus0: <Philips I2C bus> on ig4iic_pci0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
cyapa0: <Cypress APA I2C Trackpad> at addr 0xce on iicbus0
cyapa0: cyapa init status 8f
cyapa0: CYTRA-103006-00 buttons=LM- res=870x470
iicbus1: <Philips I2C bus> on ig4iic_pci1
isl0: <ISL Digital Ambient Light Sensor> at addr 0x88 on iicbus1
hdacc1: <Realtek ALC283 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC283 (Analog 2.0+HP/2.0)> at nid 20,33 and 26,25 on hdaa1
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub1: 13 ports with 13 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <NC.21411.02440730390LM0001 HD WebCam> at usbus0
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen0.3: <vendor 0x0489 product 0xe056> at usbus0
uhub2: 8 ports with 8 removable, self powered
random: unblocking device.
anon_inodefs_init: 
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 2048M
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] applying backlight present quirk
[drm] Connector eDP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.eDP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Initialized i915 1.6.0 20170123 for drmn0 on minor 0
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=4227072
pbase=0xd0081000 vbase=0xfffff800d0081000
name=drmn0 flags=0x0 stride=5504 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
wlan0: link state changed to UP