Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 10:54:31
From: Duffyx
Description: FreeBSD/amd64 on MSI MS-7998
cannot forward from 2a00:1450:400e:808::2003 to 2a02:1811:2501:8600:aced:de72:b345:73d0 nxt 6 received on vm-public
cannot forward from 2a03:2880:f021:13:face:b00c:0:1823 to 2a02:1811:2501:8600:1152:7954:368e:cbf1 nxt 6 received on vm-public
Limiting open port RST response from 341 to 200 packets/sec
Limiting open port RST response from 4168 to 200 packets/sec
Limiting open port RST response from 228 to 200 packets/sec
Limiting open port RST response from 304 to 200 packets/sec
Limiting open port RST response from 367 to 200 packets/sec
Limiting open port RST response from 638 to 200 packets/sec
Accounting enabled
Accounting disabled
ugen0.2: <Dell Dell USB Entry Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.78, addr 8> on usbus0
kbd1 at ukbd0
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 18d23h13m16s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #9 r339212: Sat Oct 6 13:59:05 CEST 2018
root@vados:/usr/obj/usr/src/sys/VADOS amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (3504.12-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66623299584 (63536 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1752061638 Hz quality 1000
random: entropy device external interface
netmap: loaded module
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd0 at kbdmux0
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mpr0: <Avago Technologies (LSI) SAS3008> port 0xe000-0xe0ff mem 0xdf440000-0xdf44ffff,0xdf400000-0xdf43ffff irq 16 at device 0.0 on pci1
mpr0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf720000-0xdf72ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <mass storage, SATA> at device 23.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf600000-0xdf607fff irq 16 at device 0.0 on pci2
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdf100000-0xdf1fffff,0xdf200000-0xdf203fff irq 18 at device 0.0 on pci3
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme0: <Generic NVMe Device> mem 0xdf500000-0xdf503fff irq 16 at device 0.0 on pci4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdf700000-0xdf71ffff irq 16 at device 31.6 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/4096, RX 1/4096
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mpr0: SAS Address for SATA device = 382f6231917d3c52
mpr0: SAS Address for SATA device = 382f6231917f5c55
mpr0: SAS Address for SATA device = 382f623191945157
mpr0: SAS Address for SATA device = 382f623190873c57
mpr0: SAS Address for SATA device = 382f623186724952
mpr0: SAS Address for SATA device = 382f623186724530
mpr0: SAS Address for SATA device = 382f6231917d4c52
mpr0: SAS Address for SATA device = 382f623191953b40
nvd0: <Samsung SSD 960 PRO 512GB> NVMe namespace
mpr0: nvd0: 488386MB (1000215216 512 byte sectors)
SAS Address from SAS device page0 = 4433221100000000
mpr0: SAS Address from SATA device = 382f6231917d3c52
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 3
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221101000000
mpr0: SAS Address from SATA device = 382f6231917f5c55
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 2
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221102000000
mpr0: SAS Address from SATA device = 382f623191945157
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000b> enclosureHandle<0x0001> slot 0
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221103000000
mpr0: SAS Address from SATA device = 382f623190873c57
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000c> enclosureHandle<0x0001> slot 1
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221104000000
mpr0: SAS Address from SATA device = 382f623186724952
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000d> enclosureHandle<0x0001> slot 7
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221105000000
mpr0: SAS Address from SATA device = 382f623186724530
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000e> enclosureHandle<0x0001> slot 6
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221106000000
mpr0: SAS Address from SATA device = 382f6231917d4c52
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000f> enclosureHandle<0x0001> slot 4
mpr0: At enclosure level 0 and connector name ( )
mpr0: SAS Address from SAS device page0 = 4433221107000000
mpr0: SAS Address from SATA device = 382f623191953b40
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0010> enclosureHandle<0x0001> slot 5
mpr0: At enclosure level 0 and connector name ( )
Trying to mount root from zfs:zroot/ROOT/default []...
da4 at mpr0 bus 0 scbus0 target 4 lun 0
da4: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors)
da7 at mpr0 bus 0 scbus0 target 7 lun 0
da7: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da7: [_SERIAL_NUMBER_XXXXX]
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 2861588MB (5860533168 512 byte sectors)
da6 at mpr0 bus 0 scbus0 target 6 lun 0
da6: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da6: [_SERIAL_NUMBER_XXXXX]
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 2861588MB (5860533168 512 byte sectors)
da2 at mpr0 bus 0 scbus0 target 2 lun 0
da2: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors)
da1 at mpr0 bus 0 scbus0 target 1 lun 0
da1: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors)
da0 at mpr0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors)
da3 at mpr0 bus 0 scbus0 target 3 lun 0
da3: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors)
da5 at mpr0 bus 0 scbus0 target 5 lun 0
da5: <ATA ST3000VN000-1HJ1 SC60> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors)
uhub0: 4 ports with 4 removable, self powered
uhub1: 26 ports with 26 removable, self powered
ugen0.2: <Dell Dell USB Entry Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <Dell Dell USB Entry Keyboard, class 0/0, rev 1.10/1.78, addr 1> on usbus0
kbd1 at ukbd0
random: unblocking device.
[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 4096M
Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
[drm] failed to retrieve link info, disabling eDP
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-3: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-3
[drm] - kern.vt.fb.default_mode
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1024 width=1280 depth=32
cmsize=16 size=5242880
pbase=0xc0340000 vbase=0xfffff800c0340000
name=drmn0 flags=0x0 stride=5120 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2
[drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
lo0: link state changed to UP
[drm] RC6 on
lo1: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
em0: link state changed to UP
igb0: link state changed to UP