Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 11:27:28
From: lyx
Description: FreeBSD/amd64 on LENOVO ThinkPad T500
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #1: Sun Sep 30 02:01:48 CEST 2018
wolfgang@laverna:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz (2793.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: (disabled in BIOS) HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3982077952 (3797 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <LENOVO TP-7V >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1396536361 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-7V> on motherboard
CPU1: local APIC error 0x40
CPU0: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4400000-0xf47fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf4200000-0xf42fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x1820-0x183f mem 0xfc100000-0xfc11ffff,0xfc324000-0xfc324fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc325c00-0xfc325fff irq 23 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xfc320000-0xfc323fff irq 17 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib2
iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf4300000-0xf4301fff irq 17 at device 0.0 on pci1
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib3
pci2: <memory> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pcib5: [GIANT-LOCKED]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc326000-0xfc3263ff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf4800000-0xf4800fff irq 16 at device 0.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci3: <serial bus, FireWire> at device 0.1 (no driver attached)
sdhci_pci0: <RICOH R5C822 SD> mem 0xf4801800-0xf48018ff irq 18 at device 0.2 on pci3
sdhci_pci0: 1 slot(s) allocated
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x1c00-0x1c1f mem 0xfc325000-0xfc3257ff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20561 (Hermosa) (Analog 2.0+HP/2.0)> at nid 26,22 and 24 on hdaa0
pcm1: <Conexant CX20561 (Hermosa) (Internal Analog Mic)> at nid 29 on hdaa0
hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0
unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached)
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG SSD 830 Series CXM03B1Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ862AC SB05> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_X] 076843
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ada0p2 [rw,noatime]...
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
random: unblocking device.
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drm_iic_dp_aux0 on drmn0
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.LVDS-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
uhub1: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
iwn0: iwn_read_firmware: ucode rev=0x08530501
ugen3.2: <Chicony Electronics Co., Ltd. product 0x4807> at usbus3
ugen1.2: <vendor 0x08ff Fingerprint Sensor> at usbus1
wlan0: link state changed to UP
wlan0: link state changed to DOWN
iwn0: device timeout
iwn0: iwn_read_firmware: ucode rev=0x08530501
wlan0: link state changed to UP
wlan0: link state changed to DOWN
iwn0: device timeout
iwn0: iwn_read_firmware: ucode rev=0x08530501
wlan0: link state changed to UP
RA with a lower CurHopLimit sent from fe80:3::260:e0ff:fe53:7980 on wlan0 (current = 255, received = 64). Ignored.