Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 12:12:45
From: dbaio
Description: IBM 3100
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA5 #4 r338557: Mon Sep 10 14:09:25 -03 2018
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz (3093.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4064862208 (3876 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <IBM    BROMOLOW>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180810/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180810/tbfadt-850)
ioapic0: Changing APIC ID to 15
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 3 2 1
Timecounter "TSC-low" frequency 1546519482 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810e1350, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <IBM BROMOLOW> on motherboard
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.31.INTC
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xc1b01000-0xc1b013ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xc0000000-0xc0ffffff,0xc1800000-0xc1803fff,0xc1000000-0xc17fffff irq 16 at device 0.0 on pci6
vgapci0: Boot video device
pcib7: <PCI-PCI bridge> at device 1.0 on pci4
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci8: <ACPI PCI bus> on pcib8
em0: <Intel(R) PRO/1000 Network Connection> port 0x2000-0x201f mem 0xc1a80000-0xc1a9ffff,0xc1a00000-0xc1a7ffff,0xc1aa0000-0xc1aa3fff irq 17 at device 0.0 on pci8
em0: attach_pre capping queues at 2
Current cap: 0x460b
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 2
em0: pxm cpus: 4 queue msgs: 4 admincnt: 1
em0: using 2 rx queues 2 tx queues
em0: Using MSIX interrupts with 3 vectors
em0: allocated for 2 tx_queues
em0: allocated for 2 rx_queues
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib9: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci9: <ACPI PCI bus> on pcib9
em1: <Intel(R) PRO/1000 Network Connection> port 0x1000-0x101f mem 0xc1980000-0xc199ffff,0xc1900000-0xc197ffff,0xc19a0000-0xc19a3fff irq 18 at device 0.0 on pci9
em1: attach_pre capping queues at 2
Current cap: 0x460b
em1: using 1024 tx descriptors and 1024 rx descriptors
em1: msix_init qsets capped at 2
em1: pxm cpus: 4 queue msgs: 4 admincnt: 1
em1: using 2 rx queues 2 tx queues
em1: Using MSIX interrupts with 3 vectors
em1: allocated for 2 tx_queues
em1: allocated for 2 rx_queues
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib10: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci11: <ACPI PCI bus> on pcib11
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xc1b02800-0xc1b02bff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib12: <PCI-PCI bridge> at device 30.0 on pci0
pci12: <PCI bus> on pcib12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x3048-0x304f,0x3058-0x305b,0x3020-0x303f mem 0xc1b02000-0xc1b027ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 226d00001f00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 226d00001f00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 226d00001f00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 226d00001f00
device_attach: est3 attach returned 6
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich4 bus 0 scbus2 target 0 lun 0
cd0: <IBM SATA DEVICE 81Y3670 IB01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WD5003ABYX-23 00W1141 00W1445IBM WC38> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ahcich2 bus 0 scbus1 target 0 lun 0
ada1: <ST500NM0011 00W1141 00W1445IBM BB4A> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <no manufacturer Gadget USB HUB> at usbus1
uhub4 on uhub2
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus1
Root mount waiting for: usbus1
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus1
ugen1.4: <IBM RNDIS/Ethernet Gadget> at usbus1
lo0: link state changed to UP
lock order reversal: (sleepable after non-sleepable)
 1st 0xfffff8001c247008 vlan (vlan) @ /usr/src/sys/net/if_vlan.c:1931
 2nd 0xfffff800036ad160 iflib ctx lock (iflib ctx lock) @ /usr/src/sys/net/iflib.c:4187
stack backtrace:
#0 0xffffffff80bf3f03 at witness_debugger+0x73
#1 0xffffffff80bf3c53 at witness_checkorder+0xab3
#2 0xffffffff80b950d8 at _sx_xlock+0x68
#3 0xffffffff80cac18c at iflib_if_ioctl+0x8c
#4 0xffffffff80c8e14a at if_addmulti+0x24a
#5 0xffffffff80c9ec46 at vlan_setmulti+0x196
#6 0xffffffff80c9de09 at vlan_ioctl+0xa9
#7 0xffffffff80c8e14a at if_addmulti+0x24a
#8 0xffffffff80d11f55 at in_joingroup_locked+0x235
#9 0xffffffff80d11cf2 at in_joingroup+0x42
#10 0xffffffff80d0d238 at in_control+0xb08
#11 0xffffffff80c8d1f3 at ifioctl+0x1853
#12 0xffffffff80bf8e3a at kern_ioctl+0x2ba
#13 0xffffffff80bf8b0e at sys_ioctl+0x15e
#14 0xffffffff8105ee1c at amd64_syscall+0x28c
#15 0xffffffff8103b47d at fast_syscall_common+0x101
Link state changed to up
em0: link state changed to UP
vlan2102: link state changed to UP
urndis0 on uhub4
urndis0: <RNDIS Communications Control> on usbus1
ue0: <USB Ethernet> on urndis0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]