Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 12:21:28
From: astral
Description: FreeBSD/amd64 on HP ProLiant DL360 G7
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz (2400.14-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 0x6  Model = 0x2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 12884901888 (12288 MB)
avail memory = 12428460032 (11852 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID: 18
 cpu3 (AP): APIC ID: 20
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130823/tbfadt-682)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20130823/tbfadt-682)
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci5: <ACPI PCI bus> on pcib1
ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 28 at device 0.0 on pci5
ciss0: PERFORMANT Transport
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci12: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci9: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci14: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci15: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib7
bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf4000000-0xf5ffffff irq 30 at device 0.0 on pci3
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: [_MAC_XXXXXXXXXX]
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf2000000-0xf3ffffff irq 37 at device 0.1 on pci3
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: [_MAC_XXXXXXXXXX]
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci4: <ACPI PCI bus> on pcib8
bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci4
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce2: Ethernet address: [_MAC_XXXXXXXXXX]
bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci4
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce3: Ethernet address: [_MAC_XXXXXXXXXX]
bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci6: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci16: <ACPI PCI bus> on pcib10
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci17: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib12
uhci0: <UHCI (generic) USB controller> port 0x3c00-0x3c1f irq 17 at device 0.4 on pci2
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0
usbus2 on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0
usbus3 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0
usbus4 on uhci4
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci1
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af,0x10b0-0x10bf irq 17 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
qpi0: <QPI system bus> on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <Intel> at usbus3
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <0x103c> at usbus0
uhub3: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen5.1: <Intel> at usbus5
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <Intel> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 1(1+0) OK> Fixed Direct Access SCSI-5 device 
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device 
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
cd0 at ata2 bus 0 scbus2 target 0 lun 0
cd0: <hp DVD A  DS8A8SH KHE4> Removable CD-ROM SCSI-0 device 
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ugen0.2: <HP> at usbus0
ukbd0: <Virtual Keyboard > on usbus0
kbd2 at ukbd0
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1200067879 Hz quality 1000
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/gpt/MGr [rw]...
ums0: <Virtual Mouse> on usbus0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
bce1: Gigabit link up!
bce1: link state changed to UP
lagg0: link state changed to UP
inet: link state changed to UP
dmz: link state changed to UP
bce0: Gigabit link up!
bce0: link state changed to UP