Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 12:28:33
From: lena
Description: FreeBSD/i386 on System manufacturer System Product Name
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 07:46:01 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
CPU: AMD Athlon(tm) 64 Processor 3500+ (2204.65-MHz 686-class CPU)
Origin="AuthenticAMD" Id=0x50ff2 Family=0xf Model=0x5f Stepping=2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
SVM: (disabled in BIOS) NAsids=64
real memory = 2684354560 (2560 MB)
avail memory = 2579415040 (2459 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <Nvidia ASUSACPI>
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20171214/tbfadt-850)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1102324477 Hz quality 800
random: entropy device external interface
module_register_init: MOD_LOAD (kbdmux, 0xc0795770, 0) error 6
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff irq 0,8 on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 at device 5.0 on pci0
nvidia0: <GeForce 6150> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 11.0 on pci0
usbus0 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 11.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci1: <ACPI PCI bus> on pcib1
hdac0: <NVIDIA MCP51 HDA Controller> mem 0xfe028000-0xfe02bfff irq 23 at device 16.1 on pci0
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xf000-0xf007 mem 0xfe02d000-0xfe02dfff irq 20 at device 20.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Ethernet address: [_MAC_XXXXXXXXXX]
acpi_tz0: <Thermal Zone> on acpi0
aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
aibs0: v0: 0x06020000 Vcore Voltage 1450 / 1750
aibs0: v1: 0x06020001 +3.3 Voltage 3000 / 3600
aibs0: v2: 0x06020002 +5.0 Voltage 4500 / 5500
aibs0: v3: 0x06020003 +12.0 Voltage 11200 / 13200
aibs0: t0: 0x06030000 CPU Temperature 900 / 1250
aibs0: t1: 0x06030001 MB Temperature 450 / 900
aibs0: FSIF: malformed package: 3/5, assume 5
aibs0: f0: 0x06040000 CPU FAN Speed 0 / 1800
aibs0: f1: 0x06040001 CHASSIS FAN Speed 0 / 1800
aibs0: f2: 0x06040002 POWER FAN Speed 0 / 1800
aibs0: f3: 0x06040005 CHIPSET FAN Speed 0 / 1800
aibs0: f4: 0x06040006 CHASSIS2 FAN Speed 0 / 1800
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
powernow0: <PowerNow! K8> on cpu0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
hdacc0: <Analog Devices AD1986A HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1986A Audio Function Group> at nid 1 on hdacc0
hdaa0: WARNING: nid=18 has zero cnid entnum=4 j=2 index=0 entries=8 found=2 res=0x21002211
pcm0: <Analog Devices AD1986A (Analog 2.0+HP)> at nid 27,26 on hdaa0
pcm1: <Analog Devices AD1986A (Rear Digital)> at nid 37 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <nVidia EHCI root HUB> at usbus1
uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <nVidia OHCI root HUB> at usbus0
uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2500JB-00GVC0 08.02D08> ATA-6 device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors)
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <Maxtor 6Y060L0 YAR41VW0> ATA-7 device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada1: 58644MB (120103200 512 byte sectors)
Trying to mount root from ufs:/dev/ada0s3a [rw,noatime]...
uhub1: 8 ports with 8 removable, self powered
warning: total configured swap (1310720 pages) exceeds maximum recommended amount (1261792 pages).
warning: increase kern.maxswzone or reduce amount of swap.
uhub0: 8 ports with 8 removable, self powered
random: unblocking device.
ugen1.2: <UFD 2.0 Silicon-Power8G> at usbus1
umass0 on uhub0
umass0: <UFD 2.0 Silicon-Power8G, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <UFD 2.0 Silicon-Power8G PMAP> Removable Direct Access SPC-2 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 7385MB (15124992 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
nfe0: link state changed to DOWN
ugen0.2: <vendor 0x055f USB Scanner> at usbus0
nfe0: link state changed to UP