Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 12:57:22
From: tingo
Description: FreeBSD/amd64 on Asus F2A55-M
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-RELEASE-p9 #0: Tue May  8 07:05:01 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(vga): resolution 640x480
CPU: AMD A8-5600K APU with Radeon(tm) HD Graphics    (3618.07-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x610f01  Family=0x15  Model=0x10  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
  Structured Extended Features=0x8<BMI1>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 15738327040 (15009 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 17
 cpu2 (AP): APIC ID: 18
 cpu3 (AP): APIC ID: 19
random: <Software, Yarrow> initialized
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160527/tbfadt-679)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff80e19a50, 0) error 19
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 17 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9902) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4c000-0xfeb4c7ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xfeb4b000-0xfeb4bfff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb4a000-0xfeb4a0ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD FCH USB Controller> mem 0xfeb49000-0xfeb49fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
hdac0: <AMD Hudson-2 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib4: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfea00000-0xfea07fff irq 18 at device 0.0 on pci4
xhci0: 32 bytes context size, 32-bit DMA
usbus4 on xhci0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 5.0Gbps Super Speed USB v3.0
ugen0.1: <AMD OHCI root HUB> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <AMD OHCI root HUB> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD EHCI root HUB> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <0x1b21 XHCI root HUB> at usbus4
uhub4: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-9YN162 CC4C> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA DT01ACA300 MX6OABB0> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <TOSHIBA HDWD130 MX6OACF0> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
uhub4: 4 ports with 4 removable, self powered
ada3: <ST3000DM001-1ER166 CC43> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad10
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1809032877 Hz quality 1000
Root mount waiting for: usbus3 usbus1
Root mount waiting for: usbus3 usbus1
uhub3: 5 ports with 5 removable, self powered
uhub1: 5 ports with 5 removable, self powered
Trying to mount root from ufs:/dev/ada0p7 [rw]...
ugen0.2: <CHESEN PS2 to USB Converter> at usbus0
ukbd0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus0
kbd2 at ukbd0
re0: link state changed to DOWN
re0: link state changed to UP
ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1