Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 14:33:05
From: ler
Description: Dell R710
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #0 r339217 LER-MINIMAL amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 640x480
CPU: Intel(R) Xeon(R) CPU           X5660  @ 2.80GHz (2793.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 137438953472 (131072 MB)
avail memory = 133877702656 (127675 MB)
CPU microcode: updated from 0x1e to 0x1f
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
random: unblocking device.
ioapic1: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
Launching APs: 1 16 3 5 20 14 11 7 18 12 4 21 23 6 9 8 2 15 10 22 17 13 19
Timecounter "TSC-low" frequency 1396528970 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80743800, 0) error 19
nexus0
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network, ethernet> at device 0.0 (no driver attached)
pci1: <network, ethernet> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pci2: <network, ethernet> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mfi0: <Dell PERC H700 Integrated> port 0xfc00-0xfcff mem 0xdf1bc000-0xdf1bffff,0xdf1c0000-0xdf1fffff irq 33 at device 0.0 on pci3
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 1008, limiting to 128
mfi0: 29092 (592194873s/0x0020/info) - Shutdown command received from host
pcib4: mfi0: 29093 (boot + 33s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/1f17/1028)
mfi0: 29094 (boot + 33s/0x0020/info) - Firmware version 2.100.03-4651
<ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: mfi0: 29095 (boot + 35s/0x0008/info) - Battery Present
mfi0: 29096 (boot + 35s/0x0020/info) - Package version 12.10.7-0001
mfi0: 29097 (boot + 35s/0x0020/info) - Board Revision A00
mfi0: <ACPI PCI bus> on pcib4
29098 (boot + 63s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored
pcib5: mfi0: 29099 (boot + 63s/0x0002/info) - Inserted: Encl PD 20
<ACPI PCI-PCI bridge> at device 6.0 on pci0
mfi0: 29100 (boot + 63s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5b4ba0b019efe700,pci5: 0000000000000000
mfi0: 29101 (boot + 63s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<ACPI PCI bus> on pcib5
mfi0: 29102 (boot + 63s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=4433221107000000,0pcib6: 000000000000000
<ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: mfi0: 29103 (boot + 63s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
mfi0: 29104 (boot + 63s/0x0002/info) - Inserted: PD 01(e0x20/s1)
<ACPI PCI bus> on pcib6
mfi0: 29105 (boot + 63s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=4433221106000000,0pcib7: 000000000000000
mfi0: 29106 (boot + 63s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
mfi0: 29107 (boot + 63s/0x0002/info) - Inserted: PD 02(e0x20/s2)
<ACPI PCI-PCI bridge> at device 9.0 on pci0
mfi0: 29108 (boot + 63s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=4433221105000000,0pci7: 000000000000000
mfi0: <ACPI PCI bus> on pcib7
29109 (boot + 63s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive
pci0: mfi0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
29110 (boot + 63s/0x0002/info) - Inserted: PD 03(e0x20/s3)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
mfi0: 29111 (boot + 63s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221104000000,0pci0: 000000000000000
<base peripheral, interrupt controller> at device 20.2 (no driver attached)
mfi0: 29112 (boot + 63s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive
pci0: mfi0: 29113 (boot + 63s/0x0002/info) - Inserted: PD 04(e0x20/s4)
<serial bus, USB> at device 26.0 (no driver attached)
mfi0: 29114 (boot + 63s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=4433221103000000,0pci0: 000000000000000
mfi0: 29115 (boot + 63s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive
mfi0: <serial bus, USB> at device 26.1 (no driver attached)
29116 (boot + 63s/0x0002/info) - Inserted: PD 05(e0x20/s5)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
mfi0: 29117 (boot + 63s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221102000000,0pci0: 000000000000000
mfi0: <serial bus, USB> at device 29.0 (no driver attached)
29118 (boot + 63s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive
pci0: mfi0: <serial bus, USB> at device 29.1 (no driver attached)
29119 (592195005s/0x0020/info) - Time established as 10/07/18  2:36:45; (86 seconds since power on)
pci0: mfi0: 29120 (592195019s/0x0008/info) - Battery temperature is normal
mfi0: <serial bus, USB> at device 29.7 (no driver attached)
29121 (592195019s/0x0008/info) - Current capacity of the battery is above threshold
pcib8: mfi0: 29122 (592195019s/0x0008/info) - Battery started charging
<ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xd5800000-0xd5ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci8
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 31.2 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xec000-0xeffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfid0 on mfi0
mfid0: 1907200MB (3905945600 sectors) RAID volume 'Disk3' is optimal
mfid1 on mfi0
mfid1: 1907200MB (3905945600 sectors) RAID volume 'Disk5' is optimal
mfid2 on mfi0
mfid2: 1907200MB (3905945600 sectors) RAID volume 'Disk4' is optimal
mfid3 on mfi0
mfid3: 1907200MB (3905945600 sectors) RAID volume 'Disk0' is optimal
mfid4 on mfi0
mfid4: 1907200MB (3905945600 sectors) RAID volume 'Disk2' is optimal
mfid5 on mfi0
mfid5: 1907200MB (3905945600 sectors) RAID volume (no label) is optimal
Trying to mount root from zfs:zroot/ROOT/fixedroot []...
TCP Hpts created 24 swi interrupt thread and bound 0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ichwd0: <Intel ICH9 watchdog timer> on isa0
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
ipmi0: IPMI device rev. 0, firmware rev. 2.85, version 2.0, device support mask 0xdf
ipmi0: Number of channels 5
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
mfip0: <SCSI Passthrough Bus> on mfi0
ioat0: <TBG IOAT Ch0> mem 0xdf0e0000-0xdf0e3fff irq 51 at device 22.0 on pci0
ioat0: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <TBG IOAT Ch1> mem 0xdf0e4000-0xdf0e7fff irq 52 at device 22.1 on pci0
ioat1: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <TBG IOAT Ch2> mem 0xdf0e8000-0xdf0ebfff irq 53 at device 22.2 on pci0
ioat2: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <TBG IOAT Ch3> mem 0xdf0ec000-0xdf0effff irq 54 at device 22.3 on pci0
ioat3: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <TBG IOAT Ch4> mem 0xdf0f0000-0xdf0f3fff irq 51 at device 22.4 on pci0
ioat4: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <TBG IOAT Ch5> mem 0xdf0f4000-0xdf0f7fff irq 52 at device 22.5 on pci0
ioat5: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <TBG IOAT Ch6> mem 0xdf0f8000-0xdf0fbfff irq 53 at device 22.6 on pci0
ioat6: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <TBG IOAT Ch7> mem 0xdf0fc000-0xdf0fffff irq 54 at device 22.7 on pci0
ioat7: Capabilities: 77<Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: [_MAC_XXXXXXXXXX]
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: [_MAC_XXXXXXXXXX]
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 32 at device 0.0 on pci2
bce2: Using defaults for TSO: 65518/35/2048
bce2: Ethernet address: [_MAC_XXXXXXXXXX]
bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 42 at device 0.1 on pci2
bce3: Using defaults for TSO: 65518/35/2048
bce3: Ethernet address: [_MAC_XXXXXXXXXX]
bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
uhci0: <Intel 82801I (ICH9) USB controller> port 0xec40-0xec5f irq 17 at device 26.0 on pci0
ses0 at mfi0 bus 0 scbus0 target 32 lun 0
ses0: <DP BACKPLANE 1.07> Fixed Enclosure Services SPC-3 SCSI device
ses0: 150.000MB/s transfers
ses0: SCSI-3 ENC Device
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xec60-0xec7f irq 18 at device 26.1 on pci0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xec80-0xec9f irq 21 at device 29.0 on pci0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0de000-0xdf0de3ff irq 19 at device 26.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0df000-0xdf0df3ff irq 21 at device 29.7 on pci0
usbus5: EHCI version 1.0
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
ugen5.1: <Intel EHCI root HUB> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
uhub3: 2 ports with 2 removable, self powered
atapci0: <Intel ATA controller> port 0xec10-0xec17,0xec08-0xec0b,0xec18-0xec1f,0xec0c-0xec0f,0xec20-0xec2f,0xec30-0xec3f irq 23 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uhub4: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
bce0: link state changed to DOWN
bce0: promiscuous mode enabled
bridge0: link state changed to DOWN
ugen4.2: <vendor 0x0424 product 0x2514> at usbus4
uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus4
uhub6: MTT enabled
ugen0.2: <Raritan D2CIM-VUSB> at usbus0
ukbd0 on uhub0
ukbd0: <Keybd+Abs+Rel Mouse> on usbus0
kbd2 at ukbd0
ugen2.2: <American Power Conversion Back-UPS RS 1500G FW:865.L3 .D USB FW:L3> at usbus2
uhub6: 3 ports with 3 removable, self powered
ugen2.3: <Avocent USB Composite Device-0> at usbus2
ukbd1 on uhub2
ukbd1: <Keyboard> on usbus2
kbd3 at ukbd1
ums0 on uhub2
ums0: <Mouse> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
bce0: link state changed to UP
bridge0: link state changed to UP
bce0: Gigabit link up!
bce0: Gigabit link up!
CPU: Intel(R) Xeon(R) CPU           X5660  @ 2.80GHz (2793.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
(aprobe0:ata2:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata2:0:1:0): CAM status: Command timeout
(aprobe0:ata2:0:1:0): Retrying command, 0 more tries remain
ata2: timeout waiting for read DRQ
(aprobe0:ata2:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata2:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata2:0:1:0): Error 5, Retries exhausted
ata2: timeout waiting for read DRQ
(aprobe0:ata2:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata2:0:1:0): CAM status: CCB request completed with an error
(aprobe0:ata2:0:1:0): Retrying command, 0 more tries remain
(aprobe0:ata2:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata2:0:1:0): CAM status: Command timeout
(aprobe0:ata2:0:1:0): Error 5, Retries exhausted
cd0 at ata2 bus 0 scbus1 target 0 lun 0
cd0: <TEAC DV-28S-W C.2D> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed