Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 14:37:10
From: kdunn
Description: FreeBSD/i386 on HP-Pavilion RJ030AV-ABA a1750y
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #0: Thu Sep 6 06:42:08 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz (1800.55-MHz 686-class CPU)
Origin="GenuineIntel" Id=0x6f2 Family=0x6 Model=0xf Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3388014592 (3231 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HPQOEM SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1800549477 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc1018a70, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-CPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
ACPI Error: AE_NO_MEMORY, SSDT 0x00000000C8B0E600 Table is duplicated (20171214/tbdata-714)
ACPI Error: Method parse/execution failed \134_PR.CPU0._PDC, AE_ALREADY_EXISTS (20171214/psparse-677)
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce 210> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfcffc000-0xfcffffff irq 17 at device 0.1 on pci1
hdac1: <Intel 82801G HDA Controller> mem 0xfdff8000-0xfdffbfff irq 16 at device 27.0 on pci0
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff00-0xff1f irq 23 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xfe00-0xfe1f irq 19 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xfd00-0xfd1f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xfc00-0xfc1f irq 16 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <serial bus, FireWire> at device 1.0 (no driver attached)
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xef00-0xef3f mem 0xfdea0000-0xfdebffff,0xfdec0000-0xfdedffff irq 16 at device 4.0 on pci2
em0: Ethernet address: [_MAC_XXXXXXXXXX]
fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0xee00-0xee3f mem 0xfdefe000-0xfdefefff irq 20 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfb00-0xfb0f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf60f mem 0xfdffe000-0xfdffe3ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd47ff,0xd5000-0xd67ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
acpi_tz0: _TMP value is absurd, ignored (-270.2C)
pcm4: <Realtek ALC888 (Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26,25 on hdaa4
pcm5: <Realtek ALC888 (Analog)> at nid 27 and 28 on hdaa4
pcm6: <Realtek ALC888 (Rear Digital)> at nid 30 and 31 on hdaa4
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: cd0: <TSSTcorp CD/DVDW TS-H652M 0414> Removable CD-ROM SCSI device
<ST500DM002-1BD142 KC45> ATA8-ACS SATA 3.x device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytesada0: [_SERIAL_NUMBER_XXXXX]
)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ada0s4a [rw]...
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
warning: total configured swap (2097152 pages) exceeds maximum recommended amount (1656704 pages).
warning: increase kern.maxswzone or reduce amount of swap.
random: unblocking device.
uhub1: 8 ports with 8 removable, self powered
ugen4.2: <Generic USB2.0-CRW> at usbus4
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus5 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus5 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus5 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
fxp0: link state changed to DOWN
ugen0.2: <Logitech USB Optical Mouse> at usbus0
ums0 on uhub4
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/34.01, addr 2> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
em0: link state changed to UP