Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 18:20:23
From: scaleengine
Description: FreeBSD/amd64 on Supermicro X9DRW-3LN4F /X9DRW-3TF
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r333800: Sat May 19 22:15:42 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/local/poudriere/jails/12amd64_20180519/usr/src/amd64.amd64/sys/GENERIC-NODEBUG amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (2000.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 103095992320 (98320 MB)
avail memory = 100312002560 (95664 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 1 21 6 10 23 7 20 3 8 22 19 15 17 13 2 11 4 12 5 14 9 16 18
Timecounter "TSC" frequency 2000044920 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810e18a0, 0) error 19
kbd1 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xdfc00000-0xdfc03fff irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 8.0 on pci2
pci3: <ACPI PCI bus> on pcib3
isci0: <Intel(R) C600 Series Chipset SAS Controller> port 0x8100-0x81ff,0x8000-0x80ff mem 0xde8f8000-0xde8fffff,0xde000000-0xde7fffff irq 26 at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci4: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7020-0x703f mem 0xdfb20000-0xdfb3ffff,0xdfbc4000-0xdfbc7fff irq 27 at device 0.0 on pci4
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 12 queue msgs: 9 admincnt: 1
igb0: using 8 rx queues 8 tx queues
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x7000-0x701f mem 0xdfb00000-0xdfb1ffff,0xdfbc0000-0xdfbc3fff irq 30 at device 0.1 on pci4
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 12 queue msgs: 9 admincnt: 1
igb1: using 8 rx queues 8 tx queues
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib5: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 41 at device 3.2 on pci0
pci7: <ACPI PCI bus> on pcib7
mps0: <Avago Technologies (LSI) SAS2308> port 0x6000-0x60ff mem 0xdfa40000-0xdfa4ffff,0xdfa00000-0xdfa3ffff irq 42 at device 0.0 on pci7
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfd24000-0xdfd243ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfd23000-0xdfd233ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 22 at device 1.0 on pci8
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x9050-0x9057,0x9040-0x9043,0x9030-0x9037,0x9020-0x9023,0x9000-0x901f mem 0xdfd22000-0xdfd227ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib9
pci9: <dasp, performance counters> at device 14.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.4 (no driver attached)
pci9: <dasp, performance counters> at device 19.5 (no driver attached)
pcib10: <ACPI Host-PCI bridge> on acpi0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 51 at device 1.0 on pci10
pci11: <ACPI PCI bus> on pcib11
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfbe20000-0xfbe3ffff,0xfbec4000-0xfbec7fff irq 52 at device 0.0 on pci11
igb2: attach_pre capping queues at 8
igb2: using 1024 tx descriptors and 1024 rx descriptors
igb2: msix_init qsets capped at 8
igb2: pxm cpus: 12 queue msgs: 9 admincnt: 1
igb2: using 8 rx queues 8 tx queues
igb2: Using MSIX interrupts with 9 vectors
igb2: allocated for 8 tx_queues
igb2: allocated for 8 rx_queues
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb2: netmap queues/slots: TX 8/1024, RX 8/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xfbe00000-0xfbe1ffff,0xfbec0000-0xfbec3fff irq 50 at device 0.3 on pci11
igb3: attach_pre capping queues at 8
igb3: using 1024 tx descriptors and 1024 rx descriptors
igb3: msix_init qsets capped at 8
igb3: pxm cpus: 12 queue msgs: 9 admincnt: 1
igb3: using 8 rx queues 8 tx queues
igb3: Using MSIX interrupts with 9 vectors
igb3: allocated for 8 tx_queues
igb3: allocated for 8 rx_queues
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: netmap queues/slots: TX 8/1024, RX 8/1024
pcib12: <ACPI PCI-PCI bridge> irq 57 at device 2.0 on pci10
pci12: <ACPI PCI bus> on pcib12
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xf020-0xf03f mem 0xfb880000-0xfb8fffff,0xfbd04000-0xfbd07fff irq 56 at device 0.0 on pci12
ix0: using 2048 tx descriptors and 2048 rx descriptors
ix0: msix_init qsets capped at 16
ix0: pxm cpus: 12 queue msgs: 63 admincnt: 1
ix0: using 12 rx queues 12 tx queues
ix0: Using MSIX interrupts with 13 vectors
ix0: allocated for 12 queues
ix0: allocated for 12 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 12/2048, RX 12/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xf000-0xf01f mem 0xfb780000-0xfb7fffff,0xfbd00000-0xfbd03fff irq 60 at device 0.1 on pci12
ix1: using 2048 tx descriptors and 2048 rx descriptors
ix1: msix_init qsets capped at 16
ix1: pxm cpus: 12 queue msgs: 63 admincnt: 1
ix1: using 12 rx queues 12 tx queues
ix1: Using MSIX interrupts with 13 vectors
ix1: allocated for 12 queues
ix1: allocated for 12 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 12/2048, RX 12/2048
pcib13: <ACPI PCI-PCI bridge> irq 64 at device 3.0 on pci10
pci13: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 64 at device 3.2 on pci10
pci14: <ACPI PCI bus> on pcib14
pcib15: <ACPI Host-PCI bridge> on acpi0
pci15: <ACPI PCI bus> on pcib15
pci15: <dasp, performance counters> at device 14.1 (no driver attached)
pci15: <dasp, performance counters> at device 19.1 (no driver attached)
pci15: <dasp, performance counters> at device 19.4 (no driver attached)
pci15: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
coretemp12: <CPU On-Die Thermal Sensors> on cpu12
coretemp13: <CPU On-Die Thermal Sensors> on cpu13
coretemp14: <CPU On-Die Thermal Sensors> on cpu14
coretemp15: <CPU On-Die Thermal Sensors> on cpu15
coretemp16: <CPU On-Die Thermal Sensors> on cpu16
coretemp17: <CPU On-Die Thermal Sensors> on cpu17
coretemp18: <CPU On-Die Thermal Sensors> on cpu18
coretemp19: <CPU On-Die Thermal Sensors> on cpu19
coretemp20: <CPU On-Die Thermal Sensors> on cpu20
coretemp21: <CPU On-Die Thermal Sensors> on cpu21
coretemp22: <CPU On-Die Thermal Sensors> on cpu22
coretemp23: <CPU On-Die Thermal Sensors> on cpu23
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus9 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus3 target 0 lun 0
ada0: <ST4000DM000-1F2168 CC54> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (7814037168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus4 target 0 lun 0
ada1: <ST4000DM000-2AE166 0001> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich4 bus 0 scbus7 target 0 lun 0
ada2: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 238475MB (488397168 512 byte sectors)
ada2: quirks=0x3<4K,NCQ_TRIM_BROKEN>
uhub0: ada3 at ahcich5 bus 0 scbus8 target 0 lun 0
ada3: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada3: Command Queueing enabled
ada3: 238475MB (488397168 512 byte sectors)
ada3: quirks=0x3<4K,NCQ_TRIM_BROKEN>
2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
da1 at mps0 bus 0 scbus2 target 9 lun 0
da1: <ATA ST4000DM000-2AE1 0001> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 3815447MB (7814037168 512 byte sectors)
da1: quirks=0x8<4K>
da3 at mps0 bus 0 scbus2 target 11 lun 0
da3: <ATA ST4000DM000-2AE1 0001> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 3815447MB (7814037168 512 byte sectors)
da3: quirks=0x8<4K>
da7 at mps0 bus 0 scbus2 target 15 lun 0
da7: <ATA ST4000DM000-2AE1 0001> Fixed Direct Access SPC-4 SCSI device
da7: [_SERIAL_NUMBER_XXXXX]
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 3815447MB (7814037168 512 byte sectors)
da7: quirks=0x8<4K>
da6 at mps0 bus 0 scbus2 target 14 lun 0
da6: <ATA ST4000DM000-2AE1 0001> Fixed Direct Access SPC-4 SCSI device
da6: [_SERIAL_NUMBER_XXXXX]
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 3815447MB (7814037168 512 byte sectors)
da6: quirks=0x8<4K>
da4 at mps0 bus 0 scbus2 target 12 lun 0
da4: <ATA ST4000DM000-1F21 CC54> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 3815447MB (7814037168 512 byte sectors)
da4: quirks=0x8<4K>
da2 at mps0 bus 0 scbus2 target 10 lun 0
da2: <ATA ST4000DM000-1F21 CC54> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 3815447MB (7814037168 512 byte sectors)
da2: quirks=0x8<4K>
da5 at mps0 bus 0 scbus2 target 13 lun 0
da5: <ATA ST4000DM000-2AE1 0001> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 3815447MB (7814037168 512 byte sectors)
da5: quirks=0x8<4K>
da0 at mps0 bus 0 scbus2 target 8 lun 0
da0: <ATA ST4000DM000-2AE1 0001> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors)
da0: quirks=0x8<4K>
Trying to mount root from zfs:sestore4/bootenv/default []...
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 on uhub2
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <Microchip Technology Inc. Simple HID Device Demo> at usbus1
GEOM_MIRROR: Device mirror/gswap1 launched (2/2).
GEOM_MIRROR: Force device gswap2 start due to timeout.
GEOM_MIRROR: Device mirror/gswap2 launched (1/2).
GEOM_MIRROR: Device mirror/gswap4 launched (2/2).
GEOM_MIRROR: Device mirror/gswap5 launched (2/2).
Root mount waiting for: GMIRROR
Root mount waiting for: GMIRROR
GEOM_MIRROR: Force device gswap3 start due to timeout.
GEOM_MIRROR: Device mirror/gswap3 launched (1/2).
lo0: link state changed to UP
lagg0: link state changed to DOWN
ix0: link state changed to UP
ix0.261: link state changed to UP
ix0.262: link state changed to UP
ix0.43: link state changed to UP
ix1: link state changed to UP
Link state changed to up
igb1: link state changed to UP
ums0 on uhub2
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
uhid0 on uhub3
uhid0: <Microchip Technology Inc. Simple HID Device Demo, class 0/0, rev 2.00/0.02, addr 3> on usbus1
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled