Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 18:20:25
From: scaleengine
Description: FreeBSD/amd64 on Supermicro X10SLH-F/X10SLM -F
igb0: promiscuous mode enabled
carp: 101@igb0: INIT -> BACKUP (initialization complete)
carp: 101@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: MASTER -> INIT (hardware interface up)
igb0: promiscuous mode disabled
igb0: promiscuous mode enabled
carp: 101@igb0: INIT -> BACKUP (initialization complete)
carp: 101@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: MASTER -> INIT (hardware interface up)
carp: 102@igb0: INIT -> BACKUP (initialization complete)
carp: 102@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 102@igb0: MASTER -> INIT (hardware interface up)
carp: 101@igb0: INIT -> BACKUP (initialization complete)
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 102@igb0: INIT -> BACKUP (initialization complete)
carp: 102@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: insertion failed for interface igb0: 17
ifa_maintain_loopback_route: deletion failed for interface lo0: 48
carp: 102@igb0: MASTER -> INIT (hardware interface up)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: MASTER -> INIT (hardware interface up)
igb0: promiscuous mode disabled
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
igb0: link state changed to DOWN
igb0: promiscuous mode enabled
carp: demoted by 240 to 240 (interface down)
carp: demoted by 240 to 480 (interface down)
carp: 101@igb0: INIT -> BACKUP (initialization complete)
carp: demoted by -240 to 240 (interface up)
carp: 102@igb0: INIT -> BACKUP (initialization complete)
carp: demoted by -240 to 0 (interface up)
igb0: link state changed to UP
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 102@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: insertion failed for interface igb0: 17
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: MASTER -> INIT (hardware interface up)
ifa_maintain_loopback_route: deletion failed for interface lo0: 48
carp: 102@igb0: MASTER -> INIT (hardware interface up)
igb0: promiscuous mode disabled
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
igb0: promiscuous mode enabled
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: demoted by 240 to 240 (interface down)
igb0: link state changed to DOWN
carp: demoted by 240 to 480 (interface down)
carp: 101@igb0: INIT -> BACKUP (initialization complete)
carp: demoted by -240 to 240 (interface up)
carp: 102@igb0: INIT -> BACKUP (initialization complete)
carp: demoted by -240 to 0 (interface up)
igb0: link state changed to UP
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 102@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: insertion failed for interface igb0: 17
carp: 101@igb0: MASTER -> BACKUP (user requested via ifconfig)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 102@igb0: MASTER -> BACKUP (user requested via ifconfig)
carp: 101@igb0: MASTER -> BACKUP (user requested via ifconfig)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 101@igb0: MASTER -> BACKUP (user requested via ifconfig)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 101@igb0: MASTER -> BACKUP (user requested via ifconfig)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (user requested via ifconfig)
carp: 102@igb0: BACKUP -> MASTER (user requested via ifconfig)
carp: 102@igb0: MASTER -> BACKUP (user requested via ifconfig)
carp: 101@igb0: MASTER -> BACKUP (user requested via ifconfig)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 102@igb0: BACKUP -> MASTER (master timed out)
carp: 101@igb0: MASTER -> BACKUP (more frequent advertisement received)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (master timed out)
carp: 101@igb0: MASTER -> BACKUP (more frequent advertisement received)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: deletion failed for interface lo0: 48
carp: 102@igb0: MASTER -> INIT (hardware interface up)
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
carp: 101@igb0: MASTER -> INIT (hardware interface up)
igb0: promiscuous mode disabled
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: deletion failed for interface igb0.100: 3
igb0: link state changed to DOWN
igb0.100: link state changed to DOWN
igb0: promiscuous mode enabled
carp: demoted by 240 to 240 (interface down)
carp: demoted by 240 to 480 (interface down)
carp: 101@igb0: INIT -> BACKUP (initialization complete)
carp: demoted by -240 to 240 (interface up)
carp: 102@igb0: INIT -> BACKUP (initialization complete)
carp: demoted by -240 to 0 (interface up)
igb0: link state changed to UP
igb0.100: link state changed to UP
carp: 102@igb0: BACKUP -> MASTER (master timed out)
ifa_maintain_loopback_route: insertion failed for interface igb0: 17
carp: 101@igb0: BACKUP -> MASTER (master timed out)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 30d19h23m39s
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p8 #0: Tue Mar 13 17:07:05 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1276 v3 @ 3.60GHz (3600.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33237950464 (31698 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1800038504 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5eb40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7a10000-0xf7a13fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7a18000-0xf7a183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci1: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xf7900000-0xf797ffff,0xf7980000-0xf7983fff irq 18 at device 0.0 on pci4
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xf7800000-0xf787ffff,0xf7880000-0xf7883fff irq 19 at device 0.0 on pci5
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: Bound queue 0 to cpu 4
igb1: Bound queue 1 to cpu 5
igb1: Bound queue 2 to cpu 6
igb1: Bound queue 3 to cpu 7
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7a17000-0xf7a173ff irq 22 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf040-0xf05f mem 0xf7a16000-0xf7a167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
uart2: console (115200,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2BB240G6 G2010140> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <INTEL SSDSC2BB240G6 G2010140> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 228936MB (468862128 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD1003FBYZ-010FB0 01.01V03> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD1003FBYZ-010FB0 01.01V03> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from zfs:zstore/bootenv/default []...
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x0557 product 0x7000> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub5: 4 ports with 3 removable, self powered
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub5
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
igb0: promiscuous mode enabled
carp: demoted by 240 to 240 (interface down)
carp: demoted by 240 to 480 (interface down)
igb1: link state changed to UP
ums0 on uhub5
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled