Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 18:25:35
From: freqlabs
Description: AMD FX-8370
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 1280x1024
CPU: AMD FX-8370 Eight-Core Processor                (4013.59-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x600f20  Family=0x15  Model=0x2  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
  Structured Extended Features=0x8<BMI1>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33190592512 (31653 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20171214/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 2006795475 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xfe080000-0xfe083fff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe800000-0xfe8001ff at device 0.0 on pci2
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfe700000-0xfe7001ff at device 0.0 on pci3
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: quirks=0xc00000<NOCCS,NOAUX>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe600000-0xfe607fff at device 0.0 on pci4
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table 
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb020-0xb03f mem 0xfe560000-0xfe57ffff,0xfe540000-0xfe55ffff at device 0.0 on pci5
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xfe520000-0xfe53ffff,0xfe500000-0xfe51ffff at device 0.1 on pci5
em1: Using an MSI interrupt
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib6: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <network, ethernet> at device 0.0 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci7: <ACPI PCI bus> on pcib7
ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe90b000-0xfe90b3ff at device 17.0 on pci0
ahci2: AHCI v1.20 with 1 6Gbps ports, Port Multiplier supported
ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich4: <AHCI channel> at channel 0 on ahci2
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe90a000-0xfe90afff at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe909000-0xfe9090ff at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe908000-0xfe908fff at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe907000-0xfe9070ff at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfe900000-0xfe903fff at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib8
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe906000-0xfe906fff at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci10: <ACPI PCI bus> on pcib10
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa000-0xa0ff mem 0xd3004000-0xd3004fff,0xd3000000-0xd3003fff at device 0.0 on pci10
re0: Using 1 MSI-X message
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib11: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci11: <ACPI PCI bus> on pcib11
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe400000-0xfe407fff at device 0.0 on pci11
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table 
usbus6 on xhci1
usbus6: 5.0Gbps Super Speed USB v3.0
pcib12: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci12: <ACPI PCI bus> on pcib12
xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe300000-0xfe307fff at device 0.0 on pci12
xhci2: 32 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table 
usbus7 on xhci2
usbus7: 5.0Gbps Super Speed USB v3.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe905000-0xfe905fff at device 22.0 on pci0
usbus8 on ohci3
usbus8: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe904000-0xfe9040ff at device 22.2 on pci0
usbus9: EHCI version 1.0
usbus9 on ehci2
usbus9: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0071) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0071) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
ugen8.1: <ATI OHCI root HUB> at usbus8
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen9.1: <ATI EHCI root HUB> at usbus9
ugen4.1: <ATI EHCI root HUB> at usbus4
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen6.1: <0x1b21 XHCI root HUB> at usbus6
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9
ugen7.1: <0x1b21 XHCI root HUB> at usbus7
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus7
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen2.1: <ATI EHCI root HUB> at usbus2
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
uhub9: ada0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
<Samsung SSD 860 EVO 500GB RVT01B6Q> ACS-4 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <Samsung SSD 860 EVO 500GB RVT01B6Q> ACS-4 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:system/ROOT/default []...
Root mount waiting for: usbus9 usbus8 usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub6: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub8: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
random: unblocking device.
Root mount waiting for: usbus9 usbus4 usbus2
uhub3: 4 ports with 4 removable, self powered
uhub7: 5 ports with 5 removable, self powered
uhub9: 5 ports with 5 removable, self powered
Root mount waiting for: usbus4
ugen8.2: <vendor 0x1b1c product 0x1c06> at usbus8
ugen3.2: <SparkFun USB IO Board> at usbus3
nvidia0: <GeForce GTX 980> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
mlx4_core0: <mlx4_core> mem 0xfe200000-0xfe2fffff,0xd2800000-0xd2ffffff at device 0.0 on pci6
mlx4_core: Mellanox ConnectX core driver v3.4.1 (October 2017)
mlx4_core: Initializing mlx4_core
ugen3.3: <vendor 0x04d9 USB Keyboard> at usbus3
ukbd0 on uhub4
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.11, addr 3> on usbus3
kbd2 at ukbd0
mlx4_core0: Unable to determine PCI device chain minimum BW
mlx4_en mlx4_core0: Activating port:1
mlxen0: Ethernet address: [_MAC_XXXXXXXXXX]
mlx4_en: mlx4_core0: Port 1: Using 8 TX rings
mlxen0: link state changed to DOWN
mlx4_en: mlx4_core0: Port 1: Using 8 RX rings
mlx4_en: mlxen0: Using 8 TX rings
mlx4_en: mlxen0: Using 8 RX rings
mlx4_en: mlxen0: Initializing port
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: link state changed to DOWN
lagg0: IPv6 addresses on em0 have been removed before adding it as a member to prevent IPv6 address scope violation.
lagg0: link state changed to DOWN
lagg0: IPv6 addresses on em1 have been removed before adding it as a member to prevent IPv6 address scope violation.
bridge0: link state changed to UP
em0: promiscuous mode enabled
em1: promiscuous mode enabled
lagg0: promiscuous mode enabled
mlxen0: tso6 disabled due to -txcsum6.
mlxen0: enable txcsum6 first.
bridge0: error setting interface capabilities on mlxen0
mlxen0: promiscuous mode enabled
bridge0: link state changed to DOWN
em0: link state changed to UP
lagg0: link state changed to UP
bridge0: link state changed to UP
uhid0 on uhub4
uhid0: <SparkFun USB IO Board, class 2/0, rev 2.00/1.00, addr 2> on usbus3
uhid1 on uhub2
uhid1: <vendor 0x1b1c product 0x1c06, class 0/0, rev 2.00/0.02, addr 2> on usbus8
uhid2 on uhub4
uhid2: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.11, addr 3> on usbus3
uhid3 on uhub4
uhid3: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.11, addr 3> on usbus3
umodem0 on uhub4
umodem0: <SparkFun USB IO Board, class 2/0, rev 2.00/1.00, addr 2> on usbus3
umodem0: data interface 1, has no CM over data, has break
em1: link state changed to UP