Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 19:21:54
From: randy
Description: b0
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2603 v4 @ 1.70GHz (1700.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33154985984 (31619 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1700036780 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <> on motherboard
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci1
pci3: <ACPI PCI bus> on pcib3
ixl0: <Intel(R) Ethernet Connection 700 Series PF Driver, Version - 1.9.9-k> mem 0xf9000000-0xf97fffff,0xf9808000-0xf980ffff irq 32 at device 0.0 on pci3
ixl0: using 1024 tx descriptors and 1024 rx descriptors
ixl0: fw 4.40.35115 api 1.4 nvm 4.53 etid 8000206e oem 255.65535.255
ixl0: PF-ID[0]: VFs 64, MSIX 129, VF MSIX 5, QPs 768, I2C
ixl0: Using MSIX interrupts with 7 vectors
ixl0: Allocating 6 queues for PF LAN VSI; 8 queues active
ixl0: Ethernet address: [_MAC_XXXXXXXXXX]
ixl0: PCI Express Bus: Speed 8.0GT/s Width x8
ixl0: SR-IOV ready
queues is 0xfffffe0000f87000
ixl0: netmap queues/slots: TX 6/1024, RX 6/1024
ixl1: <Intel(R) Ethernet Connection 700 Series PF Driver, Version - 1.9.9-k> mem 0xf8800000-0xf8ffffff,0xf9800000-0xf9807fff irq 32 at device 0.1 on pci3
ixl1: using 1024 tx descriptors and 1024 rx descriptors
ixl1: fw 4.40.35115 api 1.4 nvm 4.53 etid 8000206e oem 255.65535.255
ixl1: PF-ID[1]: VFs 64, MSIX 129, VF MSIX 5, QPs 768, I2C
ixl1: Using MSIX interrupts with 7 vectors
ixl1: Allocating 6 queues for PF LAN VSI; 8 queues active
ixl1: Ethernet address: [_MAC_XXXXXXXXXX]
ixl1: PCI Express Bus: Speed 8.0GT/s Width x8
ixl1: SR-IOV ready
queues is 0xfffffe0001089000
ixl1: netmap queues/slots: TX 6/1024, RX 6/1024
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci1
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.2 on pci1
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.3 on pci1
pci6: <ACPI PCI bus> on pcib6
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe020-0xe03f mem 0xfb120000-0xfb13ffff,0xfb144000-0xfb147fff irq 43 at device 0.0 on pci6
igb0: Using MSIX interrupts with 7 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: netmap queues/slots: TX 6/1024, RX 6/1024
ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
ixl0: link state changed to UP
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xfb100000-0xfb11ffff,0xfb140000-0xfb143fff irq 44 at device 0.1 on pci6
igb1: Using MSIX interrupts with 7 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: Bound queue 4 to cpu 4
igb1: Bound queue 5 to cpu 5
igb1: netmap queues/slots: TX 6/1024, RX 6/1024
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf020-0xf03f mem 0xfb338000-0xfb3387ff irq 16 at device 17.4 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb300000-0xfb30ffff irq 19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb334000-0xfb3343ff irq 18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pcib7: [GIANT-LOCKED]
pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci1
pci7: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 18 at device 0.0 on pci8
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb333000-0xfb3333ff irq 18 at device 29.0 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xfb332000-0xfb3327ff irq 16 at device 31.2 on pci1
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipmi0: IPMI device rev. 1, firmware rev. 3.44, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
uhub2: ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich4 bus 0 scbus5 target 0 lun 0
ada0: <HGST HUS726060ALE610 APGNT7J0> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 5723166MB (11721045168 512 byte sectors)
ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
ada1: <HGST HUS726060ALE610 APGNT7J0> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 5723166MB (11721045168 512 byte sectors)
ada2 at ahcich6 bus 0 scbus7 target 0 lun 0
ada2: <HGST HUS726060ALE610 APGNT7J0> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXX]
ada2: 600.000MB/s transfers (uhub0: SATA 3.x, UDMA6, PIO 8192bytes)2 ports with 2 removable, self powered
uhub1:
ada2: Command Queueing enabled
ada2: 5723166MB (11721045168 512 byte sectors)
ada3 at ahcich7 bus 0 scbus8 target 0 lun 0
2 ports with 2 removable, self powered
ada3: <HGST HUS726060ALE610 APGNT7J0> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytesuhub2: )
ada3: Command Queueing enabled
21 ports with 21 removable, self powered
ada3: 5723166MB (11721045168 512 byte sectors)
ada4 at ahcich8 bus 0 scbus9 target 0 lun 0
ada4: <SATA SSD S9FM02.1> ACS-3 ATA SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 15272MB (31277232 512 byte sectors)
ada5 at ahcich9 bus 0 scbus10 target 0 lun 0
ada5: <SATA SSD S9FM02.1> ACS-3 ATA SATA 3.x device
ada5: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 15272MB (31277232 512 byte sectors)
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_MIRROR: Device mirror/swap launched (2/2).
random: unblocking device.
GEOM_MIRROR: Device mirror/root launched (2/2).
Trying to mount root from ufs:/dev/mirror/root [rw]...
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x0557 product 0x7000> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub4: 6 ports with 6 removable, self powered
uhub5: 4 ports with 3 removable, self powered
ugen0.3: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub5
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
uhub_attach: Getting USB 2.0 HUB descriptor failed,error=USB_ERR_TIMEOUT
device_attach: uhub3 attach returned 6
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ums0 on uhub5
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
uhub3: 8 ports with 8 removable, self powered