Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-07 22:16:14
From: thompsa
Description: FreeBSD/amd64 on
tun3: link state changed to DOWN
tun5: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 done
All buffers synced.
Uptime: 1h40m13s
uplcom0: detached
ukbd0: detached
uhid0: detached
ums0: detached
uhub3: detached
uhub4: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16513810432 (15748 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  DQ67SW  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1696187410 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL DQ67SW> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 220> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be2) HDA Controller> mem 0xfb080000-0xfb083fff irq 16 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0a0-0xf0a7 mem 0xfb529000-0xfb529fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb500000-0xfb51ffff,0xfb528000-0xfb528fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfb527000-0xfb5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xfb520000-0xfb523fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb400000-0xfb401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfb526000-0xfb5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfb301000-0xfb301fff,0xfb200000-0xfb2fffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb525000-0xfb5257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT220 HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT220 HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT220 HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT220 HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa4
pcm5: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa4
hdacc5: <Intel Cougar Point HDA CODEC> at cad 3 on hdac1
hdaa5: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc5
pcm8: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa5
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <0x1033 XHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD1001FAES-75W7A0 05.01D05> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
ada1: <OCZ-VERTEX2 1.33> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 52472MB (107463888 512 byte sectors)
ada1: quirks=0x1<4K>
Trying to mount root from zfs:zroot []...
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus2 usbus0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus0
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x067b product 0x2303> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Microsoft Wired Keyboard 600> at usbus0
ukbd0 on uhub4
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
kbd2 at ukbd0
ugen0.5: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus0
random: unblocking device.
fxp0: link state changed to DOWN
fxp0: link state changed to UP
uplcom0 on uhub4
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/2.02, addr 3> on usbus0
uhid0 on uhub4
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
ums0 on uhub4
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 5> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
fxp0: promiscuous mode enabled
tun5: link state changed to UP
tun3: link state changed to UP
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16513810432 (15748 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  DQ67SW  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1696184478 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL DQ67SW> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 220> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be2) HDA Controller> mem 0xfb080000-0xfb083fff irq 16 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0a0-0xf0a7 mem 0xfb529000-0xfb529fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb500000-0xfb51ffff,0xfb528000-0xfb528fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfb527000-0xfb5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xfb520000-0xfb523fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb400000-0xfb401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfb526000-0xfb5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfb301000-0xfb301fff,0xfb200000-0xfb2fffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb525000-0xfb5257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT220 HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT220 HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT220 HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT220 HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa4
pcm5: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa4
hdacc5: <Intel Cougar Point HDA CODEC> at cad 3 on hdac1
hdaa5: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc5
pcm8: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa5
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <0x1033 XHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
uhub3ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
 on uhub0
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ada0: <WDC WD1001FAES-75W7A0 05.01D05> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
ada1: <OCZ-VERTEX2 1.33> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
ada1: Command Queueing enabled
ada1: 52472MB (107463888 512 byte sectors)
ada1: quirks=0x1<4K>
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Trying to mount root from zfs:zroot []...
Root mount waiting for: usbus2 usbus0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus0
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x067b product 0x2303> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Microsoft Wired Keyboard 600> at usbus0
ukbd0 on uhub4
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
kbd2 at ukbd0
random: unblocking device.
ugen0.5: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus0
fxp0: link state changed to DOWN
fxp0: link state changed to UP
uplcom0 on uhub4
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/2.02, addr 3> on usbus0
em0: link state changed to UP
uhid0 on uhub4
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
ums0 on uhub4
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 5> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
fxp0: promiscuous mode enabled
tun5: link state changed to UP
tun3: link state changed to UP
fxp0: promiscuous mode disabled
tun3: link state changed to DOWN
tun5: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
All buffers synced.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16513810432 (15748 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  DQ67SW  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1696186534 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL DQ67SW> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 220> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be2) HDA Controller> mem 0xfb080000-0xfb083fff irq 16 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0a0-0xf0a7 mem 0xfb529000-0xfb529fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb500000-0xfb51ffff,0xfb528000-0xfb528fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfb527000-0xfb5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xfb520000-0xfb523fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb400000-0xfb401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfb526000-0xfb5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfb301000-0xfb301fff,0xfb200000-0xfb2fffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb525000-0xfb5257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT220 HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT220 HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT220 HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT220 HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa4
pcm5: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa4
hdacc5: <Intel Cougar Point HDA CODEC> at cad 3 on hdac1
hdaa5: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc5
pcm8: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa5
ugen1.1: <0x1033 XHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 4 ports with 4 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD1001FAES-75W7A0 05.01D05> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
ada1: <OCZ-VERTEX2 1.33> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 52472MB (107463888 512 byte sectors)
ada1: quirks=0x1<4K>
Trying to mount root from zfs:zroot []...
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus2 usbus0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus0
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x067b product 0x2303> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Microsoft Wired Keyboard 600> at usbus0
ukbd0 on uhub4
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
kbd2 at ukbd0
ugen0.5: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus0
random: unblocking device.
fxp0: link state changed to DOWN
fxp0: link state changed to UP
uplcom0 on uhub4
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/2.02, addr 3> on usbus0
uhid0 on uhub4
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
ums0 on uhub4
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 5> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
fxp0: promiscuous mode enabled
tun5: link state changed to UP
tun3: link state changed to UP
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.37-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16513810432 (15748 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  DQ67SW  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1696184222 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL DQ67SW> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 220> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be2) HDA Controller> mem 0xfb080000-0xfb083fff irq 16 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0a0-0xf0a7 mem 0xfb529000-0xfb529fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb500000-0xfb51ffff,0xfb528000-0xfb528fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfb527000-0xfb5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xfb520000-0xfb523fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb400000-0xfb401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfb526000-0xfb5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfb301000-0xfb301fff,0xfb200000-0xfb2fffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb525000-0xfb5257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT220 HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT220 HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT220 HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT220 HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa4
pcm5: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa4
hdacc5: <Intel Cougar Point HDA CODEC> at cad 3 on hdac1
hdaa5: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc5
pcm8: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa5
ugen1.1: <0x1033 XHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 4 ports with 4 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD1001FAES-75W7A0 05.01D05> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
ada1: <OCZ-VERTEX2 1.33> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 52472MB (107463888 512 byte sectors)
ada1: quirks=0x1<4K>
Trying to mount root from zfs:zroot []...
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus2 usbus0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus0
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x067b product 0x2303> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Microsoft Wired Keyboard 600> at usbus0
ukbd0 on uhub4
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
kbd2 at ukbd0
ugen0.5: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus0
random: unblocking device.
fxp0: link state changed to DOWN
fxp0: link state changed to UP
uplcom0 on uhub4
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/2.02, addr 3> on usbus0
uhid0 on uhub4
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
ums0 on uhub4
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 5> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
fxp0: promiscuous mode enabled
tun5: link state changed to UP
tun3: link state changed to UP
fxp0: promiscuous mode disabled
tun3: link state changed to DOWN
tun5: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
All buffers synced.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (3392.36-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16513810432 (15748 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  DQ67SW  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1696182450 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL DQ67SW> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 220> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be2) HDA Controller> mem 0xfb080000-0xfb083fff irq 16 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0a0-0xf0a7 mem 0xfb529000-0xfb529fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb500000-0xfb51ffff,0xfb528000-0xfb528fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfb527000-0xfb5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xfb520000-0xfb523fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfb400000-0xfb401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfb526000-0xfb5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfb301000-0xfb301fff,0xfb200000-0xfb2fffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb525000-0xfb5257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT220 HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT220 HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT220 HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT220 HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT220 Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT220 (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa4: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa4
pcm5: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa4
hdacc5: <Intel Cougar Point HDA CODEC> at cad 3 on hdac1
hdaa5: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc5
pcm8: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa5
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <0x1033 XHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub2: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub0
uhub3: ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus4 target 0 lun 0
ada0: <WDC WD1001FAES-75W7A0 05.01D05> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus5 target 0 lun 0
uhub4ada1: <OCZ-VERTEX2 1.33> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ada1: 52472MB (107463888 512 byte sectors)
ada1: quirks=0x1<4K>
Trying to mount root from zfs:zroot []...
Root mount waiting for: usbus2 usbus0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus2 usbus0
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x067b product 0x2303> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Microsoft Wired Keyboard 600> at usbus0
ukbd0 on uhub4
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
kbd2 at ukbd0
ugen0.5: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus0
random: unblocking device.
fxp0: link state changed to DOWN
fxp0: link state changed to UP
uplcom0 on uhub4
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/2.02, addr 3> on usbus0
uhid0 on uhub4
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus0
ums0 on uhub4
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 5> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP