Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-07 22:25:26
From: wollman
Description: Junos 15.1X53-D65.3 running inside Linux KVM on a Juniper QFX10002
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD JNPR-10.3-20170607.351421_builder_stable_10 #0: Wed Jun 7 23:57:46 PDT 2017
[_EMAIL_XXXXXXXXXXXXXXXXX]:/volume/build/junos/occam/freebsd/stable_10/20170607.builder.351421/obj/amd64/juniper/kernels/JNPR-AMD64-PRD/kernel amd64
gcc version 4.2.1 (for JUNOS)
VT(vga): resolution 640x480
can't re-use a leaf (mastership_keepalive)!
CPU: Intel Xeon E312xx (Sandy Bridge) (2500.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a1 Family=0x6 Model=0x2a Stepping=1
Features=0x783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
Features2=0x9fb82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant
Hypervisor: Origin = "KVMKVMKVM"
real memory = 8192524288 (7813 MB)
avail memory = 7880929280 (7515 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BOCHS BXPCAPIC>
addr found @ 0x800f1b40
Fast boot:0
Serial Number: xxxxxxxx
Product Name: PviModel
Version: \^H
Board Version: 0TVP: Model Name read from HostOS is qfx10002-36q
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
random: <Software, Yarrow> initialized
Security policy loaded: JUNOS MAC/privcheck (mac_privcheck)
Security policy loaded: Junos MAC/fips (mac_fips)
Security policy loaded: Junos MAC/SDK (mac_sdk)
Security policy loaded: MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1
pcidev module loaded, 0 (null)
fpga driver loaded, 0 (null)
Initializing Kernel PVIDB.
Initializing DCF X86 platform properties ..
rts_sysconf_ifstate_init: registerd rtcb osd: slotid 2
Calling dcf_prds_hw_init for platform hw vecs initialization
ofwbus0: <Open Firmware Device Tree> on motherboard
fdtio0: <FDT I/O port space> on ofwbus0
fpga0: <RE system controller> port 0x191-0x198 on fdtio0
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc0a0-0xc0af at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc000-0xc01f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
pcidev0 mem 0xfc000000-0xfdffffff irq 10 at device 2.0 on pci0
pcidev0: fxpf_00: registers mapped at 0xfffff800fc000000
virtio_pci0: <VirtIO PCI Network adapter> port 0xc020-0xc03f mem 0xfe100000-0xfe100fff irq 11 at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci1: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xfe101000-0xfe101fff irq 11 at device 4.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI Network adapter> port 0xc060-0xc07f mem 0xfe102000-0xfe102fff irq 10 at device 5.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe103000-0xfe1033ff irq 10 at device 6.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
virtio_pci3: <VirtIO PCI Network adapter> port 0xc080-0xc09f mem 0xfe104000-0xfe104fff irq 11 at device 16.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci3
pci0: <old> at device 22.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: console (9600,n,8,1)
uart0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0
Initializing product: 169 ..
Setting Serial ID!!!
md0: Preloaded image </packages/sets/active/boot/os-kernel/contents.izo> 7984640 bytes at 0xffffffff81a68990
usbus0: 12Mbps Full Speed USB v1.0
JUNOS procfs is initialized.
Timecounters tick every 1.000 msec
Loading Redundant LT driver
Registered AMT tunnel Encap with UDP Tunnel!
can't re-use a leaf (pvidb_rootnode)!
rts_init: registered inrtsock osd: slotid 3
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <QEMU HARDDISK 2.2.0> ATA-7 device
ada0: [_SERIAL_NUMBER_XXXX]
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 8193MB (16779264 512 byte sectors)
ada0: Previously was known as ad0
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <QEMU HARDDISK 2.2.0> ATA-7 device
ada1: [_SERIAL_NUMBER_XXXX]
ada1: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada1: 4096MB (8388608 512 byte sectors)
ada1: Previously was known as ad1
ada2 at ata1 bus 0 scbus1 target 0 lun 0
ada2: <QEMU HARDDISK 2.2.0> ATA-7 device
ada2: [_SERIAL_NUMBER_XXXX]
ada2: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada2: 512MB (1048576 512 byte sectors)
ada2: Previously was known as ad2
ada3 at ata1 bus 0 scbus1 target 1 lun 0
ada3: <QEMU HARDDISK 2.2.0> ATA-7 device
ada3: [_SERIAL_NUMBER_XXXX]
ada3: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada3: 1024MB (2097152 512 byte sectors)
ada3: Previously was known as ad3
random: unblocking device.
SMP: AP CPU #1 Launched!
Kernel thread "wkupdaemon" (pid 24) exited prematurely.
Timecounter "TSC-low" frequency 1250028822 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1
uhub2: 6 ports with 6 removable, self powered
Trying to mount root from cd9660:/dev/md0.uzip []...
pci-hgcomdev module loadedhgcommdev0: <HGCOMMDEV For Host VM communication> mem 0xfe105000-0xfe105fff at device 22.0 on pci0
hgcommdev0: hgcommdev: registers at 0xfffff800fe105000