Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 22:58:56
From: root
Description: FreeBSD/amd64 on MSI MS-7641
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-ALPHA8 r339204 GENERIC-NODEBUG amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: AMD FX(tm)-6300 Six-Core Processor (3500.14-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16554852352 (15787 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <7641MS A7641100> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-796) ioapic0: Changing APIC ID to 22 ioapic0 <Version 2.1> irqs 0-23 on motherboard Launching APs: 1 4 5 3 2 Timecounter "TSC-low" frequency 1750068778 Hz quality 1000 random: entropy device external interface module_register_init: MOD_LOAD (vesa, 0xffffffff81102f20, 0) error 19 kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard acpi0: <7641MS A7641100> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xfa000000-0xfbffffff,0xfe9e0000-0xfe9effff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1 vgapci0: Boot video device pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeafe000-0xfeafffff irq 18 at device 0.0 on pci3 xhci0: 64 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xd800-0xd803,0xd400-0xd41f mem 0xfebffc00-0xfebffdff irq 19 at device 0.0 on pci4 ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahci0: quirks=0xc00000<NOCCS,NOAUX> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe7ffc00-0xfe7fffff irq 22 at device 17.0 on pci0 ahci1: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ahcich4: <AHCI channel> at channel 2 on ahci1 ahcich5: <AHCI channel> at channel 3 on ahci1 ahcich6: <AHCI channel> at channel 4 on ahci1 ahcich7: <AHCI channel> at channel 5 on ahci1 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 usbus1 on ohci0 usbus1: 12Mbps Full Speed USB v1.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 usbus2 on ohci1 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 usbus4 on ohci2 usbus4: 12Mbps Full Speed USB v1.0 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0 usbus5 on ohci3 usbus5: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 usbus6: 480Mbps High Speed USB v2.0 atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci5: <ACPI PCI bus> on pcib5 ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0 usbus7 on ohci4 usbus7: 12Mbps Full Speed USB v1.0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen3.1: <ATI EHCI root HUB> at usbus3 ugen4.1: <ATI OHCI root HUB> at usbus4 ugen1.1: <ATI OHCI root HUB> at usbus1 ugen7.1: <ATI OHCI root HUB> at usbus7 ugen6.1: <ATI EHCI root HUB> at usbus6 ugen2.1: <ATI OHCI root HUB> at usbus2 uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 ugen5.1: <ATI OHCI root HUB> at usbus5 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <0x1912 XHCI root HUB> at usbus0 uhub7: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub4: 2 ports with 2 removable, self powered uhub2: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub5: 3 ports with 3 removable, self powered uhub6: 3 ports with 3 removable, self powered uhub7: 8 ports with 8 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD20EFRX-68EUZN0 80.00A80> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD20EFRX-68EUZN0 80.00A80> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST500DM002-1BD142 KC45> ATA8-ACS SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) ada2: quirks=0x1<4K> Trying to mount root from zfs:zroot/ROOT/12.0 []... ugen0.2: <FTDI FT232R USB UART> at usbus0 Root mount waiting for: usbus6 usbus3 uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 usbus3 uhub0: 6 ports with 6 removable, self powered ugen3.2: <Western Digital My Passport 0746> at usbus3 umass0 on uhub0 umass0: <MSC Bulk-Only Transport> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:9:0: Attached to scbus9 da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0: <WD My Passport 0746 1007> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 953837MB (1953458176 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ses0 at umass-sim0 bus 0 scbus9 target 0 lun 1 ses0: <WD SES Device 1007> Fixed Enclosure Services SPC-4 SCSI device ses0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX] ses0: 40.000MB/s transfers ses0: SCSI-3 ENC Device ugen5.2: <American Power Conversion Back-UPS RS 1200 FW:8.g3 .D USB FW:g3> at usbus5 ugen5.3: <Prolific Technology Inc. USB-Serial Controller> at usbus5 [drm] Initialized [drm] radeon kernel modesetting enabled. drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1462:0x7641 0x00). [drm] register mmio base: 0xFE9E0000 [drm] register mmio size: 65536 [drm:radeon_device_init] Unable to find PCI I/O BAR [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO ATOM BIOS: B43106 drmn0: VRAM: 32M 0x00000000C0000000 - 0x00000000C1FFFFFF (32M used) drmn0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [drm] Detected VRAM RAM=32M, BAR=32M [drm] RAM width 32bits DDR Zone kernel: Available graphics memory: 8330292 kiB Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [drm] radeon: 32M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Loading RS780 Microcode radeon/RS780_pfp.bin: could not load firmware image, error 2 radeon/RS780_pfp.bin: could not load firmware image, error 2 radeon/RS780_me.bin: could not load firmware image, error 2 radeon/RS780_me.bin: could not load firmware image, error 2 radeon/R600_rlc.bin: could not load firmware image, error 2 radeon/R600_rlc.bin: could not load firmware image, error 2 [drm] radeon: power management initialized [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). drmn0: WB enabled drmn0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xfffff8001d2dfc00 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. drmn0: radeon: MSI limited to 32-bit [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] hw_i2c forced on, you may experience display detection problems! [drm] Connector VGA-1: get mode from tunables: [drm] - kern.vt.fb.modes.VGA-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD3 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP3: INTERNAL_KLDSCP_LVTMA [drm] fb mappable at 0xFA141000 [drm] vram apper at 0xFA000000 [drm] size 786432 [drm] fb depth is 8 [drm] pitch is 1024 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=768 width=1024 depth=8 cmsize=16 size=786432 pbase=0xfa141000 vbase=0xfffff800fa141000 name=drmn0 flags=0x0 stride=1024 bpp=8 cmap[0]=0 cmap[1]=60 cmap[2]=c cmap[3]=b0 end FB_INFO drmn0: fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.48.0 20080528 for drmn on minor 0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 intsmb0: intr SMI enabled revision 0 intsmb0: using polling mode when configured interrupt is SMI smbus0: <System Management Bus> on intsmb0 uftdi0 on uhub7 uftdi0: <FT232R USB UART> on usbus0 uplcom0 on uhub5 uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 3> on usbus5