Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-07 23:27:08
From: chuck
Description: sv0
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-ALPHA6 r338675 amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU C2750 @ 2.41GHz (2416.82-MHz K8-class CPU) Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8199393280 (7819 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL TIANO > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) random: unblocking device. Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180810/tbfadt-850) ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 5 4 1 2 6 3 7 Timecounter "TSC-low" frequency 1208412266 Hz quality 1000 random: entropy device external interface [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810e2420, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd0 at kbdmux0 netmap: loaded module nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> mem 0xffffc0000-0xffffdffff irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2 vgapci0: Boot video device pcib3: <ACPI PCI-PCI bridge> mem 0xffffa0000-0xffffbffff irq 16 at device 2.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdf100000-0xdf101fff irq 17 at device 0.0 on pci3 xhci0: 64 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib4: <ACPI PCI-PCI bridge> mem 0xffff80000-0xffff9ffff irq 20 at device 3.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci0: <base peripheral, IOMMU> at device 15.0 (no driver attached) igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe0c0-0xe0df mem 0xffff60000-0xffff7ffff,0xffffec000-0xffffeffff irq 20 at device 20.0 on pci0 igb0: attach_pre capping queues at 8 igb0: using 1024 tx descriptors and 1024 rx descriptors igb0: msix_init qsets capped at 8 igb0: pxm cpus: 8 queue msgs: 9 admincnt: 1 igb0: using 8 rx queues 8 tx queues igb0: Using MSIX interrupts with 9 vectors igb0: allocated for 8 tx_queues igb0: allocated for 8 rx_queues igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe0a0-0xe0bf mem 0xffff40000-0xffff5ffff,0xffffe8000-0xffffebfff irq 21 at device 20.1 on pci0 igb1: attach_pre capping queues at 8 igb1: using 1024 tx descriptors and 1024 rx descriptors igb1: msix_init qsets capped at 8 igb1: pxm cpus: 8 queue msgs: 9 admincnt: 1 igb1: using 8 rx queues 8 tx queues igb1: Using MSIX interrupts with 9 vectors igb1: allocated for 8 tx_queues igb1: allocated for 8 rx_queues igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe080-0xe09f mem 0xffff20000-0xffff3ffff,0xffffe4000-0xffffe7fff irq 22 at device 20.2 on pci0 igb2: attach_pre capping queues at 8 igb2: using 1024 tx descriptors and 1024 rx descriptors igb2: msix_init qsets capped at 8 igb2: pxm cpus: 8 queue msgs: 9 admincnt: 1 igb2: using 8 rx queues 8 tx queues igb2: Using MSIX interrupts with 9 vectors igb2: allocated for 8 tx_queues igb2: allocated for 8 rx_queues igb2: Ethernet address: [_MAC_XXXXXXXXXX] igb2: netmap queues/slots: TX 8/1024, RX 8/1024 igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe060-0xe07f mem 0xffff00000-0xffff1ffff,0xffffe0000-0xffffe3fff irq 23 at device 20.3 on pci0 igb3: attach_pre capping queues at 8 igb3: using 1024 tx descriptors and 1024 rx descriptors igb3: msix_init qsets capped at 8 igb3: pxm cpus: 8 queue msgs: 9 admincnt: 1 igb3: using 8 rx queues 8 tx queues igb3: Using MSIX interrupts with 9 vectors igb3: allocated for 8 tx_queues igb3: allocated for 8 rx_queues igb3: Ethernet address: [_MAC_XXXXXXXXXX] igb3: netmap queues/slots: TX 8/1024, RX 8/1024 ehci0: <Intel Avoton USB 2.0 controller> mem 0xdf203000-0xdf2033ff irq 23 at device 22.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 ahci0: <Intel Avoton AHCI SATA controller> port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf202000-0xdf2027ff irq 19 at device 23.0 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahci1: <Intel Avoton AHCI SATA controller> port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf201000-0xdf2017ff irq 19 at device 24.0 on pci0 ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 0 on ahci1 ahcich5: <AHCI channel> at channel 1 on ahci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: console (115200,n,8,1) orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x1912 XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 ada0: <ST380817AS 3.42> ATA-6 SATA 1.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 76319MB (156301488 512 byte sectors) WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus1 usbus0 uhub0: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 uhub1: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 ugen1.2: <vendor 0x8087 product 0x07db> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus1 Root mount waiting for: usbus1 uhub2: 4 ports with 4 removable, self powered ugen1.3: <vendor 0x0000 product 0x0001> at usbus1 uhub3 on uhub2 uhub3: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 3> on usbus1 uhub3: 4 ports with 3 removable, self powered Root mount waiting for: usbus1 ugen1.4: <vendor 0x0557 product 0x2419> at usbus1 ukbd0 on uhub3 ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus1 kbd1 at ukbd0 lo0: link state changed to UP Link state changed to up igb0: link state changed to UP ums0 on uhub3 ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus1 ums0: 3 buttons and [Z] coordinates ID=0