Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 07:16:47
From: Maurizio-emmex
Description: Mac mini mid 2011 running TrueOS
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #10 d26791952(trueos-stable-17.12): Sat Dec 9 18:10:09 UTC 2017
root@chimera:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 5.0.1 (branches/release_50 319231) (based on LLVM 5.0.1)
VT(vga): text 80x25
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz (2294.84-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3980623872 (3796 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <APPLE Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1147417824 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff80fc0ed0, 0) error 19
kbd0 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xa0000000-0xa03fffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0
drmn0: <Intel SandyBridge (M)> on vgapci0
info: [drm] Memory usable by graphics device = 2048M
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
intel_sdvo_ddc_proxy921920 on drmn0
intel_sdvo_ddc_proxy921920: detached
drm_iic_dp_aux0 on drmn0
drm_iic_dp_aux1 on drmn0
drm_iic_dp_aux2 on drmn0
drmn0: taking over the fictitious range 0x90000000-0xa0000000
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-3
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-3
info: [drm] - kern.vt.fb.default_mode
info: [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
drmn0: warning: VGA-1: EDID block 0 invalid.
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x2120-0x213f irq 21 at device 26.0 on pci0
uhci0: LegSup = 0x2400
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xa0906c00-0xa0906fff irq 23 at device 26.7 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Cougar Point HDA Controller> mem 0xa0900000-0xa0903fff irq 22 at device 27.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem 0xa0400000-0xa040ffff,0xa0410000-0xa041ffff irq 16 at device 0.0 on pci3
bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
sdhci_pci0: <Broadcom BCM577xx SDXC/MMC Card Reader> mem 0xa0420000-0xa042ffff irq 17 at device 0.1 on pci3
sdhci_pci0: 1 slot(s) allocated
pcib4: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <network> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
pci6: <serial bus, FireWire> at device 0.0 (no driver attached)
uhci1: <UHCI (generic) USB controller> port 0x20c0-0x20df irq 19 at device 29.0 on pci0
uhci1: LegSup = 0x2400
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xa0906800-0xa0906bff irq 22 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA600 controller> port 0x2148-0x214f,0x215c-0x215f,0x2140-0x2147,0x2158-0x215b,0x2060-0x206f,0xffe0-0xffef irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
iSCSI boot driver version 0.2.13
IS: Initiator name: iqn.2010-04.org.ipxe:macmini
NIC0: IP address:[_IP_XXXXXXX]
NIC0: Prefix: 24
NIC0: Gateway:[_IP_XXXXXX]
NIC0: MAC address: [_MAC_XXXXXXXXXX]
NIC0: Host name: macmini
TGT0: Target IP address:[_IP_XXXXXX]
TGT0: Target Port: 3260
TGT0: Target LUN: 0
TGT0: Target name: iqn.2013-03.clover-nas2:disk-trueos
Boot NIC: bge0
Configure IPv4 by NIC0
Attempting to login to iSCSI target and scan all LUNs.
bge0: link state changed to DOWN
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
connect error
connect failed
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
connect error
connect failed
connect error
connect failed
uhub0: 6 ports with 6 removable, self powered
bge0: link state changed to UP
*********************** I_bit = 0
hdacc0: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac0
hdaa0: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc0
pcm0: <Cirrus Logic CS4206 (Analog)> at nid 11 and 12 on hdaa0
pcm1: <Cirrus Logic CS4206 (Digital)> at nid 16 and 15 on hdaa0
pcm2: <Cirrus Logic CS4206 (Analog Headphones)> at nid 10 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
uhub1: 8 ports with 8 removable, self powered
ugen1.2: <vendor 0x0424 product 0x2513> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x0424 product 0x2513, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub4: MTT enabled
uhub4: 3 ports with 2 removable, self powered
ugen3.2: <vendor 0x0424 product 0x2513> at usbus3
uhub5 on uhub1
uhub5: <vendor 0x0424 product 0x2513, class 9/0, rev 2.00/b.b3, addr 2> on usbus3
uhub5: MTT enabled
ugen1.3: <Apple Inc. BRCM20702 Hub> at usbus1
uhub6 on uhub4
uhub6: <Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1
uhub5: 3 ports with 2 removable, self powered
uhub6: 3 ports with 0 removable, self powered
ugen3.3: <Apple Computer, Inc. IR Receiver> at usbus3
ugen1.4: <vendor 0x05ac product 0x820a> at usbus1
ukbd0 on uhub6
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus1
kbd1 at ukbd0
ugen3.4: <Microsoft Wired Keyboard 600> at usbus3
ukbd1 on uhub5
ukbd1: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus3
kbd2 at ukbd1
ugen1.5: <vendor 0x05ac product 0x820b> at usbus1
ugen1.6: <Apple Inc. Bluetooth USB Host Controller> at usbus1
ugen1.7: <B16b02 USB-PS2 Optical Mouse> at usbus1
ugen1.8: <Clover Informatica ExseKey Memory LITE> at usbus1
umass0 on uhub4
umass0: <Clover Informatica ExseKey Memory LITE, class 0/0, rev 1.10/1.00, addr 8> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:3:0: Attached to scbus3
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK5065GSXF GV108B> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 476940MB (976773168 512 byte sectors)
da0 at isboot0 bus 0 scbus2 target 0 lun 0
da0: <FREEBSD CTLDISK 0001> Fixed Direct Access SPC-5 SCSI device
da0: [_SERIAL_NUMBER_XXXXX] 1
da0: 300.000MB/s transfers
da0: 131072MB (268435456 512 byte sectors)
da1 at umass-sim0 bus 0 scbus3 target 0 lun 0
da1: <Generic USB Flash Drive %z!Y> Removable Direct Access SCSI-2 device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 1.000MB/s transfers
da1: 62MB (128640 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
Boot device: da0
Trying to mount root from zfs:tank/ROOT/12.0-CURRENT-up-20180108_132027 []...
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
Cuse v0.1.35 @ /dev/cuse
acpi_video0: <ACPI video extension> on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ums1 on uhub6
ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus1
ums1: 3 buttons and [XY] coordinates ID=2
ums0 on uhub4
ums0: <B16b02 USB-PS2 Optical Mouse, class 0/0, rev 2.00/98.02, addr 7> on usbus1
ums0: 4 buttons and [XYZ] coordinates ID=0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
uhid0 on uhub5
uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 3> on usbus3
uhid1 on uhub5
uhid1: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus3
ubt0 on uhub6
ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/1.54, addr 6> on usbus1
WARNING pid 4186 (python2.7): ioctl sign-extension ioctl ffffffff80087467
WARNING pid 4187 (python2.7): ioctl sign-extension ioctl ffffffff80087467