Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 09:07:37
From: Alexander
Description: Supermicro X6DVA with Adaptec 29320ALP
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.16-MHz K8-class CPU)
Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
AMD Features=0x20000800<SYSCALL,LM>
TSC: P-state invariant
real memory = 15569256448 (14848 MB)
avail memory = 14511390720 (13839 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 hardware threads
ioapic1: Changing APIC ID to 11
ioapic2: Changing APIC ID to 9
ioapic3: Changing APIC ID to 10
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic2 <Version 2.0> irqs 24-47 on motherboard
ioapic3 <Version 2.0> irqs 48-71 on motherboard
ioapic1 <Version 2.0> irqs 72-95 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1400077990 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
ahd0: <Adaptec 29320ALP Ultra320 SCSI adapter> port 0x8800-0x88ff,0x8400-0x84ff mem 0xfc7fe000-0xfc7fffff irq 48 at device 1.0 on pci3
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xac00-0xac07,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c1f mem 0xfc8ffc00-0xfc8ffdff irq 16 at device 0.0 on pci4
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xbc00-0xbc3f mem 0xfc9e0000-0xfc9fffff irq 74 at device 1.0 on pci5
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/256, RX 1/256
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xb800-0xb83f mem 0xfc9c0000-0xfc9dffff irq 75 at device 2.0 on pci5
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/256, RX 1/256
uhci0: <Intel 6300ESB USB controller USB-A> port 0xe800-0xe81f irq 16 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 6300ESB USB controller USB-B> port 0xec00-0xec1f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
device_attach: ioapic0 attach returned 6
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xfd000000-0xfdffffff,0xfeaff000-0xfeafffff irq 17 at device 2.0 on pci6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x540-0x55f at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xd1000-0xd8fff,0xd9000-0xd9fff,0xda000-0xdafff on isa0
ppc0: cannot reserve I/O port range
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
<WDC WD1003FBYX-01Y7B1 01.01V02> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD1003FBYX-01Y7B1 01.01V02> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
da0 at ahd0 bus 0 scbus0 target 0 lun 0
da0: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 320.000MB/s transfers (160.000MHz DT, offset 63, 16bit)
da0: Command Queueing enabled
da0: 140014MB (286749480 512 byte sectors)
da1 at ahd0 bus 0 scbus0 target 1 lun 0
da1: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da1: 320.000MB/s transfers (160.000MHz DT, offset 63, 16bit)
da1: Command Queueing enabled
da1: 140014MB (286749480 512 byte sectors)
da2 at ahd0 bus 0 scbus0 target 2 lun 0
da2: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da2: 320.000MB/s transfers (160.000MHz DT, offset 63, 16bit)
da2: Command Queueing enabled
da2: 140014MB (286749480 512 byte sectors)
da3 at ahd0 bus 0 scbus0 target 3 lun 0
da3: <SEAGATE ST3146707LW 0003> Fixed Direct Access SCSI-3 device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da3: 320.000MB/s transfers (160.000MHz DT, offset 63, 16bit)
da3: Command Queueing enabled
da3: 140014MB (286749488 512 byte sectors)
Trying to mount root from zfs:tank/ROOT/default []...
random: unblocking device.
em0: link state changed to UP