Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 12:01:16
From: lbartoletti
Description: FreeBSD Salon 12.0-ALPHA5 amd64
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA5 #0 r338518: Fri Sep 7 02:13:14 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): text 80x25
CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3368.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16541958144 (15775 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 3 2
Timecounter "TSC-low" frequency 1684037264 Hz quality 1000
Cuse v0.1.35 @ /dev/cuse
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810e1350, 0) error 19
kbd1 at kbdmux0
netmap: loaded module
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.77 Tue Jul 10 21:54:30 PDT 2018
acquiring duplicate lock of same type: "os.lock_sx"
1st os.lock_sx @ nvidia_os.c:651
2nd os.lock_sx @ nvidia_os.c:651
stack backtrace:
#0 0xffffffff80bf3ee3 at witness_debugger+0x73
#1 0xffffffff80bf3c33 at witness_checkorder+0xab3
#2 0xffffffff80b950b8 at _sx_xlock+0x68
#3 0xffffffff82ff5912 at os_acquire_mutex+0x32
#4 0xffffffff82ef0ed6 at _nv032854rm+0x16
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf8000000-0xf9ffffff,0xe8000000-0xefffffff,0xf0000000-0xf3ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GTX 560 Ti> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA GF110 HDA Controller> mem 0xfa080000-0xfa083fff irq 17 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> port 0xf040-0xf05f mem 0xfa700000-0xfa71ffff,0xfa728000-0xfa728fff irq 18 at device 25.0 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: Unable to map MSIX table
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfa727000-0xfa7273ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xfa720000-0xfa723fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfa600000-0xfa607fff irq 17 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
em1: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xfa5c0000-0xfa5dffff,0xfa500000-0xfa57ffff,0xfa5e0000-0xfa5e3fff irq 18 at device 0.0 on pci4
em1: attach_pre capping queues at 2
Current cap: 0x460b
em1: using 1024 tx descriptors and 1024 rx descriptors
em1: msix_init qsets capped at 2
em1: pxm cpus: 4 queue msgs: 4 admincnt: 1
em1: using 2 rx queues 2 tx queues
em1: Using MSIX interrupts with 3 vectors
em1: allocated for 2 tx_queues
em1: allocated for 2 rx_queues
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
atapci0: <JMicron JMB362 SATA300 controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xfa410000-0xfa4101ff irq 19 at device 0.0 on pci5
ahci0: <JMicron JMB362 AHCI SATA controller> at channel -1 on atapci0
ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfa300000-0xfa307fff irq 16 at device 0.0 on pci6
xhci1: 32 bytes context size, 32-bit DMA
xhci1: Unable to map MSI-X table
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib8
pci8: <serial bus, FireWire> at device 3.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci9: <ACPI PCI bus> on pcib9
ahci1: <Marvell 88SE9172 AHCI SATA controller> port 0xa040-0xa047,0xa030-0xa033,0xa020-0xa027,0xa010-0xa013,0xa000-0xa00f mem 0xfa110000-0xfa1101ff irq 19 at device 0.0 on pci9
ahci1: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfa726000-0xfa7263ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci2: <Intel Cougar Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfa725000-0xfa7257ff irq 20 at device 31.2 on pci0
ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich6: <AHCI channel> at channel 2 on ahci2
ahciem0: <AHCI enclosure management bridge> on ahci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xce000-0xd0fff,0xd1000-0xd1fff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0016) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA (0x0016) HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA (0x0016) HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA (0x0016) HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA (0x0016) Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA (0x0016) (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4
pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa4
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
ugen2.1: <0x1b21 XHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD1002FAEX-00Y9A0 05.01D05> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD1002FAEX-00Y9A0 05.01D05> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich6 bus 0 scbus4 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-222AL SB00> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 569MB (291765 2048 byte sectors)
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
uhub2: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ugen3.2: <vendor 0x8087 product 0x0024> at usbus3
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen3.3: <Logitech USB Receiver> at usbus3
ukbd0 on uhub4
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus3
kbd2 at ukbd0
ugen3.4: <Logitech USB Receiver> at usbus3
ukbd1 on uhub4
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus3
kbd3 at ukbd1
Root mount waiting for: usbus3
ugen3.5: <vendor 0x0cf3 product 0x3000> at usbus3
lo0: link state changed to UP
Link state changed to up
em1: link state changed to UP
ums0 on uhub4
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus3
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub4
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 3> on usbus3
ums1 on uhub4
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus3
ums1: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub4
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus3
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
Accounting enabled
CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (3368.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
Security policy loaded: MAC/ntpd (mac_ntpd)