Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-08 12:05:45
From: dnebdal
Description: Analysis server
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #4 r326620: Wed Dec  6 11:45:53 CET 2017
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz (2597.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 274877906944 (262144 MB)
avail memory = 267212369920 (254833 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #26 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #28 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #29 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #27 Launched!
SMP: AP CPU #30 Launched!
SMP: AP CPU #31 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #24 Launched!
SMP: AP CPU #25 Launched!
Timecounter "TSC-low" frequency 1298524461 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f679f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib2: _OSC returned error 0x10
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci2
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0x92c00000-0x92dfffff,0x92e00000-0x92e03fff at device 0.0 numa-domain 0 on pci9
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 8.0GT/s Width x4
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
pcib10: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci2
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci2
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci2
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci2: <unknown> at device 17.0 (no driver attached)
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93202000-0x932023ff at device 26.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib13: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci2
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci2
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci14
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci14
usbus2 numa-domain 0 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
pcib15: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci2
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
bge0: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f90000-0x92f9ffff,0x92fa0000-0x92faffff,0x92fb0000-0x92fbffff at device 0.0 numa-domain 0 on pci15
bge0: APE FW version: NCSI v1.3.7.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f60000-0x92f6ffff,0x92f70000-0x92f7ffff,0x92f80000-0x92f8ffff at device 0.1 numa-domain 0 on pci15
bge1: APE FW version: NCSI v1.3.7.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f30000-0x92f3ffff,0x92f40000-0x92f4ffff,0x92f50000-0x92f5ffff at device 0.2 numa-domain 0 on pci15
bge2: APE FW version: NCSI v1.3.7.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f00000-0x92f0ffff,0x92f10000-0x92f1ffff,0x92f20000-0x92f2ffff at device 0.3 numa-domain 0 on pci15
bge3: APE FW version: NCSI v1.3.7.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib16: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci2
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci2
pci17: <ACPI PCI bus> numa-domain 0 on pcib17
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93201000-0x932013ff at device 29.0 numa-domain 0 on pci2
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x2058-0x205f,0x207c-0x207f,0x2050-0x2057,0x2078-0x207b,0x2020-0x203f mem 0x93200000-0x932007ff at device 31.2 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib18: _OSC returned error 0x10
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci18
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci18
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci18
pci21: <ACPI PCI bus> numa-domain 1 on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci18
pci22: <ACPI PCI bus> numa-domain 1 on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 1 on pci18
pci23: <ACPI PCI bus> numa-domain 1 on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 1 on pci18
pci24: <ACPI PCI bus> numa-domain 1 on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 1 on pci18
pci25: <ACPI PCI bus> numa-domain 1 on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci18
pci26: <ACPI PCI bus> numa-domain 1 on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 1 on pci18
pci27: <ACPI PCI bus> numa-domain 1 on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 1 on pci18
pci28: <ACPI PCI bus> numa-domain 1 on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 1 on pci18
pci29: <ACPI PCI bus> numa-domain 1 on pcib29
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen2.1: <HP UHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <MB2000GCWLT HPG3> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <MB2000GCWLT HPG3> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Samsung SSD 850 PRO 512GB EXM02B6Q> ACS-2 ATA SATA 3.x device
uhub1: ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
GEOM_MIRRORada2: Command Queueing enabled
ada2: 488386MB (1000215216 512 byte sectors)
ada2: quirks=0x3<4K,NCQ_TRIM_BROKEN>
2 ports with 2 removable, self powered
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
: Device mirror/swap launched (2/2).
ada3: <Samsung SSD 750 EVO 250GB MAT01B6Q> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada3: Command Queueing enabled
ada3: 238475MB (488397168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus3 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 21 ports with 21 removable, self powered
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub4 numa-domain 0 on uhub0
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
Root mount waiting for: usbus3 usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub5 numa-domain 0 on uhub2
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
uhub6 numa-domain 0 on uhub3
uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
uhub4: 8 ports with 8 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub6: 2 ports with 1 removable, self powered
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap1: Ethernet address: [_MAC_XXXXXXXXXX]
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge0: link state changed to DOWN
bge3: link state changed to DOWN
tap0: promiscuous mode enabled
bridge0: link state changed to DOWN
tap1: promiscuous mode enabled
bge0: link state changed to UP
ix0: link state changed to UP
ix0: link state changed to DOWN
ix0: link state changed to UP