Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 12:13:28
From: dnebdal
Description: Fileserver (new)
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #5 r326729: Sat Dec 9 17:29:37 CET 2017
root@genlab6:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E5-2623 v3 @ 3.00GHz (2996.59-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33141825536 (31606 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1498295840 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f679f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
mps0: <Avago Technologies (LSI) SAS2308> port 0x3000-0x30ff mem 0x93440000-0x9344ffff,0x93400000-0x9343ffff at device 0.0 numa-domain 0 on pci3
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
pcib4: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem 0x93200000-0x932fffff,0x93300000-0x933003ff at device 0.0 numa-domain 0 on pci4
ciss0: PERFORMANT Transport
pcib5: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci1
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci1
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci1
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0x92c00000-0x92dfffff,0x92e00000-0x92e03fff at device 0.0 numa-domain 0 on pci8
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 8.0GT/s Width x4
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
pcib9: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci1
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci1
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci1
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pci1: <unknown> at device 17.0 (no driver attached)
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93501000-0x935013ff at device 26.0 numa-domain 0 on pci1
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci1
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci1
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci13
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci13
usbus2 numa-domain 0 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
pcib14: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci1
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
bge0: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f90000-0x92f9ffff,0x92fa0000-0x92faffff,0x92fb0000-0x92fbffff at device 0.0 numa-domain 0 on pci14
bge0: APE FW version: NCSI v1.3.7.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f60000-0x92f6ffff,0x92f70000-0x92f7ffff,0x92f80000-0x92f8ffff at device 0.1 numa-domain 0 on pci14
bge1: APE FW version: NCSI v1.3.7.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f30000-0x92f3ffff,0x92f40000-0x92f4ffff,0x92f50000-0x92f5ffff at device 0.2 numa-domain 0 on pci14
bge2: APE FW version: NCSI v1.3.7.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <HP Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x92f00000-0x92f0ffff,0x92f10000-0x92f1ffff,0x92f20000-0x92f2ffff at device 0.3 numa-domain 0 on pci14
bge3: APE FW version: NCSI v1.3.7.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib15: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci1
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
pcib16: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci1
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93500000-0x935003ff at device 29.0 numa-domain 0 on pci1
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
isa0: <ISA bus> numa-domain 0 on isab0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen2.1: <HP UHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 21 ports with 21 removable, self powered
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub5 numa-domain 0 on uhub1
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub6 numa-domain 0 on uhub2
uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
uhub4: 2 ports with 1 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
ses0 at mps0 bus 0 scbus0 target 10 lun 0
ses0: <HP D3600 3.64> Fixed Enclosure Services SPC-4 SCSI device
ses0: [_SERIAL_NUMBER_XXXXXXX]
ses0: 600.000MB/s transfers
ses0: SCSI-3 ENC Device
da8 at mps0 bus 0 scbus0 target 17 lun 0
da8: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da8: [_SERIAL_NUMBER_XXXXX]
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 9537536MB (19532873728 512 byte sectors)
da13 at ciss0 bus 32 scbus2 target 17 lun 0
da11 at mps0 bus 0 scbus0 target 20 lun 0
da13: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da13: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da13: 135.168MB/s transfers
da13: Command Queueing enabled
da11: da13: 5723166MB (11721045168 512 byte sectors)
da13: quirks=0x8<4K>
da15 at ciss0 bus 32 scbus2 target 19 lun 0
da15: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
<ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da15: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da15: 135.168MB/s transfersda11: [_SERIAL_NUMBER_XXXXX]
da15: Command Queueing enabled
da15: 5723166MB (11721045168 512 byte sectors)
da11: 600.000MB/s transfersda15: quirks=0x8<4K>
da4 at mps0 bus 0 scbus0 target 13 lun 0
da4: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXX]
da4: 600.000MB/s transfers
da11: Command Queueing enabled
da4: Command Queueing enabled
da4: 9537536MB (19532873728 512 byte sectors)
da21 at ciss0 bus 32 scbus2 target 25 lun 0
da21: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da21: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da11: 9537536MB (19532873728 512 byte sectors)
da12 at ciss0 bus 32 scbus2 target 16 lun 0
da21: 135.168MB/s transfers
da21: Command Queueing enabled
da21: 5723166MB (11721045168 512 byte sectors)
da21: quirks=0x8<4K>
da6 at mps0 bus 0 scbus0 target 15 lun 0
da12: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da12: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da6: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da6: [_SERIAL_NUMBER_XXXXX]
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 9537536MB (19532873728 512 byte sectors)
da12: 135.168MB/s transfersda27 at ciss0 bus 32 scbus2 target 31 lun 0
da27: <ATA SAMSUNG MZ7KM240 003Q> Fixed Direct Access SPC-4 SCSI device
da27: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da27: 135.168MB/s transfers
da27: Command Queueing enabled
da12: Command Queueing enabled
da27: 228936MB (468862128 512 byte sectors)
da27: quirks=0x8<4K>
da23 at ciss0 bus 32 scbus2 target 27 lun 0
da23: da12: 5723166MB (11721045168 512 byte sectors)
<ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da23: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da12: quirks=0x8<4K>
da23: 135.168MB/s transfers
da23: Command Queueing enabled
da23: 5723166MB (11721045168 512 byte sectors)
da23: quirks=0x8<4K>
da2 at mps0 bus 0 scbus0 target 11 lun 0
da14 at ciss0 bus 32 scbus2 target 18 lun 0
da2: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 9537536MB (19532873728 512 byte sectors)
da14: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da10 at mps0 bus 0 scbus0 target 19 lun 0
da10: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da10: [_SERIAL_NUMBER_XXXXX]
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da14: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da10: 9537536MB (19532873728 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 9 lun 0
da1: <SEAGATE ST8000NM0075 E002> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da14: 135.168MB/s transfersda1: 600.000MB/s transfers
da1: Command Queueing enabled
da14: Command Queueing enabled
da1: 7630885MB (15628053168 512 byte sectors)
da14: 5723166MB (11721045168 512 byte sectors)
da17 at ciss0 bus 32 scbus2 target 21 lun 0
da14: quirks=0x8<4K>
da20 at ciss0 bus 32 scbus2 target 24 lun 0
da17: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da17: [_SERIAL_NUMBER_XXXXX]
da20: da17: 135.168MB/s transfers<ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da20: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da17: Command Queueing enabled
da20: 135.168MB/s transfersda17: 9537536MB (19532873728 512 byte sectors)
da25 at ciss0 bus 32 scbus2 target 29 lun 0
da20: Command Queueing enabled
da20: 5723166MB (11721045168 512 byte sectors)
da25: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da25: [_SERIAL_NUMBER_XXXXX]
da20: quirks=0x8<4K>
da25: 135.168MB/s transfers
da25: Command Queueing enabled
da26 at ciss0 bus 32 scbus2 target 30 lun 0
da25: 9537536MB (19532873728 512 byte sectors)
da19 at ciss0 bus 32 scbus2 target 23 lun 0
da26: da19: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
<ATA SAMSUNG MZ7KM240 003Q> Fixed Direct Access SPC-4 SCSI device
da26: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da19: [_SERIAL_NUMBER_XXXXX]
da19: 135.168MB/s transfersda26: 135.168MB/s transfers
da19: Command Queueing enabled
da19: 9537536MB (19532873728 512 byte sectors)
da26: Command Queueing enabled
da26: 228936MB (468862128 512 byte sectors)
da26: quirks=0x8<4K>
da22 at ciss0 bus 32 scbus2 target 26 lun 0
da22: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da22: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da22: 135.168MB/s transfers
da22: Command Queueing enabled
da22: 5723166MB (11721045168 512 byte sectors)
da22: quirks=0x8<4K>
da7 at mps0 bus 0 scbus0 target 16 lun 0
da7: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da7: [_SERIAL_NUMBER_XXXXX]
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 9537536MB (19532873728 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 8 lun 0
da0: <SEAGATE ST8000NM0075 E002> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 7630885MB (15628053168 512 byte sectors)
da9 at mps0 bus 0 scbus0 target 18 lun 0
da9: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da9: [_SERIAL_NUMBER_XXXXX]
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 9537536MB (19532873728 512 byte sectors)
da5 at mps0 bus 0 scbus0 target 14 lun 0
da5: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 9537536MB (19532873728 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 12 lun 0
da3: <HGST HUH721010AL5200 A384> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 9537536MB (19532873728 512 byte sectors)
da24 at ciss0 bus 32 scbus2 target 28 lun 0
da24: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da24: [_SERIAL_NUMBER_XXXXX]
da24: 135.168MB/s transfers
da24: Command Queueing enabled
da24: 9537536MB (19532873728 512 byte sectors)
da18 at ciss0 bus 32 scbus2 target 22 lun 0
da18: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da18: [_SERIAL_NUMBER_XXXXX]
da18: 135.168MB/s transfers
da18: Command Queueing enabled
da18: 9537536MB (19532873728 512 byte sectors)
da16 at ciss0 bus 32 scbus2 target 20 lun 0
da16: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da16: [_SERIAL_NUMBER_XXXXX]
da16: 135.168MB/s transfers
da16: Command Queueing enabled
da16: 9537536MB (19532873728 512 byte sectors)
ses0: da2,pass3: Element descriptor: '{"Name":"DriveBay1"}'
ses0: da2,pass3: SAS Device Slot Element: 1 Phys at Slot 1, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca2668fb18d
ses0: da0,pass0: Element descriptor: '{"Name":"DriveBay2"}'
ses0: da0,pass0: SAS Device Slot Element: 1 Phys at Slot 2, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000c50093e39ed5
ses0: da1,pass1: Element descriptor: '{"Name":"DriveBay3"}'
ses0: da1,pass1: SAS Device Slot Element: 1 Phys at Slot 3, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000c50093e3bd11
ses0: da3,pass4: Element descriptor: '{"Name":"DriveBay4"}'
ses0: da3,pass4: SAS Device Slot Element: 1 Phys at Slot 4, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca2668fae49
ses0: da4,pass5: Element descriptor: '{"Name":"DriveBay5"}'
ses0: da4,pass5: SAS Device Slot Element: 1 Phys at Slot 5, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca266892095
ses0: da5,pass6: Element descriptor: '{"Name":"DriveBay6"}'
ses0: da5,pass6: SAS Device Slot Element: 1 Phys at Slot 6, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
GEOM: da16: corrupt or invalid GPT detected.
ses0: phy 0: parent 50014380412ce43d addr 5000cca266891fd1
ses0: da6,pass7: Element descriptor: '{"Name":"DriveBay7"}'
GEOM: da16: GPT rejected -- may not be recoverable.
ses0: da6,pass7: SAS Device Slot Element: 1 Phys at Slot 7, Not All Phys
GEOM: da17: corrupt or invalid GPT detected.
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca266873939
ses0: da7,pass8: Element descriptor: '{"Name":"DriveBay8"}'
GEOM: da17: GPT rejected -- may not be recoverable.
ses0: da7,pass8: SAS Device Slot Element: 1 Phys at Slot 8, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca266946159
ses0: da8,pass9: Element descriptor: '{"Name":"DriveBay9"}'
ses0: da8,pass9: SAS Device Slot Element: 1 Phys at Slot 9, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
GEOM: da19: corrupt or invalid GPT detected.
ses0: phy 0: parent 50014380412ce43d addr 5000cca26697ada1
ses0: da9,pass10: Element descriptor: '{"Name":"DriveBay10"} '
GEOM: da19: GPT rejected -- may not be recoverable.
ses0: da9,pass10: SAS Device Slot Element: 1 Phys at Slot 10, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca266892131
ses0: da10,pass11: Element descriptor: '{"Name":"DriveBay11"} '
ses0: da10,pass11: SAS Device Slot Element: 1 Phys at Slot 11, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
ses0: phy 0: parent 50014380412ce43d addr 5000cca2669782a9
ses0: da11,pass12: Element descriptor: '{"Name":"DriveBay12"} '
GEOM: da25: corrupt or invalid GPT detected.
ses0: da11,pass12: SAS Device Slot Element: 1 Phys at Slot 12, Not All Phys
ses0: phy 0: SAS device type 1 id 0
ses0: phy 0: protocols: Initiator( None ) Target( SSP )
GEOM: da25: GPT rejected -- may not be recoverable.
ses0: phy 0: parent 50014380412ce43d addr 5000cca266945e5d
Trying to mount root from zfs:bootpool/ROOT/current []...
GEOM: diskid/DISK-ZA20RCVD: corrupt or invalid GPT detected.
GEOM: diskid/DISK-ZA20RCVD: GPT rejected -- may not be recoverable.
GEOM: diskid/DISK-ZA20RAAE: corrupt or invalid GPT detected.
GEOM: diskid/DISK-ZA20RAAE: GPT rejected -- may not be recoverable.
GEOM: diskid/DISK-ZA20RNHV: corrupt or invalid GPT detected.
GEOM: diskid/DISK-ZA20RNHV: GPT rejected -- may not be recoverable.
GEOM: diskid/DISK-ZA20PCD8: corrupt or invalid GPT detected.
GEOM: diskid/DISK-ZA20PCD8: GPT rejected -- may not be recoverable.
bge0: link state changed to DOWN
bge3: link state changed to DOWN
bge0: link state changed to UP
ix0: link state changed to UP
ix0: link state changed to DOWN
ix0: link state changed to UP