Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 12:49:19
From: avg
Description: FreeBSD/amd64 on ASUSTeK COMPUTER INC. M5A99X EVO
Table 'FACP' at 0xcdafad18
Table 'APIC' at 0xcdafae10
APIC: Found table at 0xcdafae10
APIC: Using the MADT enumerator.
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #169 r325321+85a4f6073d2ee(devel)-dirty: Thu May 17 15:35:58 EEST 2018
avg@trant:/usr/obj/usr/src/amd64.amd64/sys/TRANTd amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn)
WARNING: WITNESS option enabled, expect reduced performance.
Table 'FACP' at 0xcdafad18
Table 'APIC' at 0xcdafae10
Table 'MCFG' at 0xcdafaeb0
Table 'HPET' at 0xcdafaef0
Table 'SSDT' at 0xcdafb078
Table 'IVRS' at 0xcdafaf80
ACPI: No SRAT table found
PPIM 0: PA=0xb8000, VA=0xffffffff83c10000, size=0x8000, mode=0
VT(vga): text 80x25
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff83ab9000.
Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff83ab9e28.
Preloaded elf obj module "/boot/kernel/dtraceall.ko" at 0xffffffff83ab9e80.
Preloaded elf obj module "/boot/kernel/profile.ko" at 0xffffffff83aba3b0.
Preloaded elf obj module "/boot/kernel/dtrace.ko" at 0xffffffff83abaa98.
Preloaded elf obj module "/boot/kernel/systrace_freebsd32.ko" at 0xffffffff83abb200.
Preloaded elf obj module "/boot/kernel/systrace.ko" at 0xffffffff83abb878.
Preloaded elf obj module "/boot/kernel/sdt.ko" at 0xffffffff83abbee8.
Preloaded elf obj module "/boot/kernel/fasttrap.ko" at 0xffffffff83abc5d0.
Preloaded elf obj module "/boot/kernel/fbt.ko" at 0xffffffff83abcd40.
Preloaded elf obj module "/boot/kernel/dtnfscl.ko" at 0xffffffff83abd3a8.
Preloaded elf obj module "/boot/kernel/dtmalloc.ko" at 0xffffffff83abda10.
Preloaded elf obj module "/boot/kernel/vmm.ko" at 0xffffffff83abe080.
Preloaded elf obj module "/boot/kernel/nmdm.ko" at 0xffffffff83abe7e8.
Preloaded elf obj module "/boot/kernel/amdfch.ko" at 0xffffffff83abee10.
Preloaded elf obj module "/boot/kernel/it.ko" at 0xffffffff83abf3f8.
Preloaded elf obj module "/boot/kernel/superio.ko" at 0xffffffff83abf9e0.
Preloaded elf obj module "/boot/kernel/intpm.ko" at 0xffffffff83ac0008.
Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff83ac05f0.
Preloaded elf obj module "/boot/kernel/amdfchsmb.ko" at 0xffffffff83ac0b58.
Preloaded elf obj module "/boot/kernel/jedec_ts.ko" at 0xffffffff83ac1188.
Preloaded elf obj module "/boot/kernel/smb.ko" at 0xffffffff83ac1778.
Preloaded elf obj module "/boot/kernel/ahci_twsi.ko" at 0xffffffff83ac1d60.
Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff83ac2350.
Preloaded elf obj module "/boot/kernel/amd_dct.ko" at 0xffffffff83ac2938.
Preloaded elf obj module "/boot/kernel/amdsbwd.ko" at 0xffffffff83ac2f20.
Preloaded elf obj module "/boot/modules/nvidia-modeset.ko" at 0xffffffff83ac3508.
Preloaded elf obj module "/boot/kernel/linux.ko" at 0xffffffff83ac3ab8.
Preloaded elf obj module "/boot/kernel/linux_common.ko" at 0xffffffff83ac44e0.
Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff83ac4c50.
Calibrating TSC clock ... TSC clock: 3210886989 Hz
CPU: AMD Phenom(tm) II X6 1090T Processor (3210.89-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100fa0 Family=0x10 Model=0xa Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
SVM: Features=0x40f<NP,LbrVirt,SVML,NRIPS,PauseFilter>
Revision=1, ASIDs=64
TSC: P-state invariant, performance statistics
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 34359738368 (32768 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000003b13000 - 0x00000000cd828fff, 3385942016 bytes (826646 pages)
0x00000000cdd71000 - 0x00000000cdefffff, 1634304 bytes (399 pages)
0x0000000100001000 - 0x00000007fb497fff, 29985697792 bytes (7320727 pages)
avail memory = 32809594880 (31289 MB)
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 5: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 6: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 7: disabled
MADT: Found CPU APIC ID 8 ACPI ID 8: disabled
Event timer "LAPIC" quality 100
LAPIC: ipi_wait() us multiplier 46 (r 6880342 tsc 3210886989)
ACPI APIC Table: <ALASKA A M I>
Package ID shift: 3
L3 cache ID shift: 3
L2 cache ID shift: 0
L1 cache ID shift: 0
Core ID shift: 0
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
Package HW ID = 0
Core HW ID = 0
CPU0 (BSP): APIC ID: 0
Core HW ID = 1
CPU1 (AP): APIC ID: 1
Core HW ID = 2
CPU2 (AP): APIC ID: 2
Core HW ID = 3
CPU3 (AP): APIC ID: 3
Core HW ID = 4
CPU4 (AP): APIC ID: 4
Core HW ID = 5
CPU5 (AP): APIC ID: 5
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
APIC: CPU 4 has ACPI ID 5
APIC: CPU 5 has ACPI ID 6
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe08e914f000
x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
lapic0: MCE Thresholding ELVT unmasked
amd_thresholding_monitor: Starting AMD thresholding on bank 4
Pentium Pro MTRR support enabled
random: read 3840 bytes from preloaded cache
random: unblocking device.
arc4random: read 32 bytes from preloaded cache
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CDAF2070 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CDAFAD18 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170929/tbfadt-796)
ACPI: DSDT 0x00000000CDAF2158 008BBC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000CDB06F80 000040
ACPI: APIC 0x00000000CDAFAE10 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000CDAFAEB0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000CDAFAEF0 000038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 0x00000000CDAFB078 000E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: IVRS 0x00000000CDAFAF80 0000F8 (v01 AMD RD890S 00202031 AMD 00000000)
MADT: Found IO APIC ID 7, Interrupt 0 at 0xfec00000
ioapic0: ver 0x21 maxredir 0x17
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 8, Interrupt 24 at 0xfec20000
ioapic1: ver 0x21 maxredir 0x1f
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
lapic: Divisor 2, Frequency 100340248 Hz
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00040007
AMD elvt0: 0x00010000
AMD elvt1: 0x000000f2
AMD elvt2: 0x00010000
AMD elvt3: 0x00010000
amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled
amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled
amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled
amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled
amd_thresholding_monitor: 0xc01a0ffe01000000: Bank 4: already enabled
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00040007
AMD elvt0: 0x00010000
AMD elvt1: 0x00010000
AMD elvt2: 0x00010000
AMD elvt3: 0x00010000
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00040007
AMD elvt0: 0x00010000
AMD elvt1: 0x00010000
AMD elvt2: 0x00010000
AMD elvt3: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00040007
AMD elvt0: 0x00010000
AMD elvt1: 0x00010000
AMD elvt2: 0x00010000
AMD elvt3: 0x00010000
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00040007
AMD elvt0: 0x00010000
AMD elvt1: 0x00010000
AMD elvt2: 0x00010000
AMD elvt3: 0x00010000
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
AMD ext features: 0x00040007
AMD elvt0: 0x00010000
AMD elvt1: 0x00010000
AMD elvt2: 0x00010000
AMD elvt3: 0x00010000
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1605443494 Hz quality 1000
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
cpuctl: access to MSR registers/cpuid info.
module_register_init: MOD_LOAD (vesa, 0xffffffff80909770, 0) error 19
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
nfslock: pseudo-device
mem: <memory>
null: <full device, null device, zero device>
crypto: <crypto core>
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.98 Thu Oct 26 09:43:40 PDT 2017
acquiring duplicate lock of same type: "os.lock_sx"
1st os.lock_sx @ nvidia_os.c:638
2nd os.lock_sx @ nvidia_os.c:638
stack backtrace:
#0 0xffffffff806eb373 at witness_debugger+0x73
#1 0xffffffff806eafda at witness_checkorder+0x85a
#2 0xffffffff8069afee at _sx_xlock+0x6e
#3 0xffffffff82f13c12 at os_acquire_mutex+0x32
#4 0xffffffff82e1abe6 at _nv031388rm+0x16
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
acpi0: <ALASKA A M I> on motherboard
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
AMD-Vi IVRS VAsize = 64 PAsize = 52 GVAsize = 0 flags:0
cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
cpu2: Processor \134_PR_.P003 (ACPI ID 3) -> APIC ID 2
cpu2: <ACPI CPU> on acpi0
cpu3: Processor \134_PR_.P004 (ACPI ID 4) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
cpu4: Processor \134_PR_.P005 (ACPI ID 5) -> APIC ID 4
cpu4: <ACPI CPU> on acpi0
cpu5: Processor \134_PR_.P006 (ACPI ID 6) -> APIC ID 5
cpu5: <ACPI CPU> on acpi0
ACPI: Processor \134_PR_.P007 (ACPI ID 7) ignored
ACPI: Processor \134_PR_.P008 (ACPI ID 8) ignored
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 1 vector 48
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x4353, rev 0x10, 14318180Hz, 3 timers, legacy route
hpet0: t0: irqs 0x00c00000 (0), MSI, periodic
hpet0: t1: irqs 0x00c00000 (0), MSI, periodic
hpet0: t2: irqs 0x00c00000 (0), MSI, periodic
Timecounter "HPET" frequency 14318180 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 3 vector 48
msi: routing MSI-X IRQ 257 to local APIC 4 vector 48
msi: routing MSI-X IRQ 258 to local APIC 5 vector 48
msi: Assigning MSI-X IRQ 256 to local APIC 0 vector 50
msi: Assigning MSI-X IRQ 257 to local APIC 0 vector 51
msi: Assigning MSI-X IRQ 258 to local APIC 0 vector 52
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
ACPI timer: 0/116 0/1 0/117 0/116 0/1 0/117 0/117 0/116 0/1 0/117 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 10 11 14 15
Validation 0 255 N 0 3 4 10 11 14 15
After Disable 0 255 N 0 3 4 10 11 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xff
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0xcf7
pcib0: decoding 4 range 0x3b0-0x3df
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xd0000000-0xffffffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x5a14, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
MSI supports 4 messages
found-> vendor=0x1002, dev=0x5a23, revid=0x00
domain=0, bus=0, slot=0, func=2
class=08-06-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 1 message, 64 bit
found-> vendor=0x1002, dev=0x5a16, revid=0x00
domain=0, bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 52
secbus=1, subbus=1
found-> vendor=0x1002, dev=0x5a18, revid=0x00
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 52
secbus=2, subbus=2
found-> vendor=0x1002, dev=0x5a19, revid=0x00
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 52
secbus=3, subbus=3
found-> vendor=0x1002, dev=0x5a1a, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 53
secbus=4, subbus=4
found-> vendor=0x1002, dev=0x5a1b, revid=0x00
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 53
secbus=5, subbus=5
found-> vendor=0x1002, dev=0x5a1d, revid=0x00
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 54
secbus=6, subbus=6
found-> vendor=0x1002, dev=0x4391, revid=0x40
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[10]: type I/O Port, range 32, base 0xf040, size 3, enabled
pcib0: allocated type 4 (0xf040-0xf047) for rid 10 of pci0:0:17:0
map[14]: type I/O Port, range 32, base 0xf030, size 2, enabled
pcib0: allocated type 4 (0xf030-0xf033) for rid 14 of pci0:0:17:0
map[18]: type I/O Port, range 32, base 0xf020, size 3, enabled
pcib0: allocated type 4 (0xf020-0xf027) for rid 18 of pci0:0:17:0
map[1c]: type I/O Port, range 32, base 0xf010, size 2, enabled
pcib0: allocated type 4 (0xf010-0xf013) for rid 1c of pci0:0:17:0
map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled
pcib0: allocated type 4 (0xf000-0xf00f) for rid 20 of pci0:0:17:0
map[24]: type Memory, range 32, base 0xfe90b000, size 10, enabled
pcib0: allocated type 3 (0xfe90b000-0xfe90b3ff) for rid 24 of pci0:0:17:0
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=18, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[10]: type Memory, range 32, base 0xfe90a000, size 12, enabled
pcib0: allocated type 3 (0xfe90a000-0xfe90afff) for rid 10 of pci0:0:18:0
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 18
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=18, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe909000, size 8, enabled
pcib0: allocated type 3 (0xfe909000-0xfe9090ff) for rid 10 of pci0:0:18:2
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe908000, size 12, enabled
pcib0: allocated type 3 (0xfe908000-0xfe908fff) for rid 10 of pci0:0:19:0
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 20
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe907000, size 8, enabled
pcib0: allocated type 3 (0xfe907000-0xfe9070ff) for rid 10 of pci0:0:19:2
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 21
found-> vendor=0x1002, dev=0x4385, revid=0x42
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4383, revid=0x40
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xfe900000, size 14, enabled
pcib0: allocated type 3 (0xfe900000-0xfe903fff) for rid 10 of pci0:0:20:2
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x439d, revid=0x40
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x40
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=7, subbus=7
found-> vendor=0x1002, dev=0x4399, revid=0x00
domain=0, bus=0, slot=20, func=5
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
map[10]: type Memory, range 32, base 0xfe906000, size 12, enabled
pcib0: allocated type 3 (0xfe906000-0xfe906fff) for rid 10 of pci0:0:20:5
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x43a0, revid=0x00
domain=0, bus=0, slot=21, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
secbus=8, subbus=11
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=22, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe905000, size 12, enabled
pcib0: allocated type 3 (0xfe905000-0xfe905fff) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 22
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=22, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe904000, size 8, enabled
pcib0: allocated type 3 (0xfe904000-0xfe9040ff) for rid 10 of pci0:0:22:2
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 23
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
pcib0: allocated type 3 (0xfd000000-0xfe0fffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xd0000000-0xd9ffffff) for rid 24 of pcib1
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfd000000-0xfe0fffff
pcib1: prefetched decode 0xd0000000-0xd9ffffff
pcib1: special decode VGA
pci1: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x1287, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib1: allocated memory range (0xfd000000-0xfdffffff) for rid 10 of pci0:1:0:0
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 27, enabled
pcib1: allocated prefetch range (0xd0000000-0xd7ffffff) for rid 14 of pci0:1:0:0
map[1c]: type Prefetchable Memory, range 64, base 0xd8000000, size 25, enabled
pcib1: allocated prefetch range (0xd8000000-0xd9ffffff) for rid 1c of pci0:1:0:0
map[24]: type I/O Port, range 32, base 0xe000, size 7, enabled
pcib1: allocated I/O port range (0xe000-0xe07f) for rid 24 of pci0:1:0:0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 24
found-> vendor=0x10de, dev=0x0e0f, revid=0xa1
domain=0, bus=1, slot=0, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfe080000, size 14, enabled
pcib1: allocated memory range (0xfe080000-0xfe083fff) for rid 10 of pci0:1:0:1
pcib1: matched entry for 1.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 25
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xd0000000-0xd7ffffff,0xd8000000-0xd9ffffff irq 24 at device 0.0 on pci1
nvidia0: <GeForce GT 730> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 259 to local APIC 0 vector 53
vgapci0: using IRQ 259 for MSI
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1
hdac0: PCI card vendor: 0x1043, device: 0x8525
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 260 to local APIC 1 vector 49
hdac0: using IRQ 260 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 4, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib2
pcib0: allocated type 3 (0xda100000-0xda1fffff) for rid 24 of pcib2
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: prefetched decode 0xda100000-0xda1fffff
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x06
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled
pcib2: allocated I/O port range (0xd000-0xd0ff) for rid 10 of pci0:2:0:0
map[18]: type Prefetchable Memory, range 64, base 0xda104000, size 12, enabled
pcib2: allocated prefetch range (0xda104000-0xda104fff) for rid 18 of pci0:2:0:0
map[20]: type Prefetchable Memory, range 64, base 0xda100000, size 14, enabled
pcib2: allocated prefetch range (0xda100000-0xda103fff) for rid 20 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 44
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xda104000-0xda104fff,0xda100000-0xda103fff irq 44 at device 0.0 on pci2
re0: MSI count : 1
re0: MSI-X count : 4
re0: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 261 to local APIC 2 vector 48
re0: using IRQ 261 for MSI-X
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 5
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: bpf attached
re0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pcib0: allocated type 3 (0xfe800000-0xfe8fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xfe800000-0xfe8fffff
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x1b21, dev=0x1042, revid=0x00
domain=0, bus=3, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xfe800000, size 15, enabled
pcib3: allocated memory range (0xfe800000-0xfe807fff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 46
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe800000-0xfe807fff irq 46 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 262 to local APIC 3 vector 48
xhci0: using IRQ 262 for MSI
xhci0: MSI enabled
usbus0 on xhci0
xhci0: usbpf: Attached
usbus0: 5.0Gbps Super Speed USB v3.0
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 6.0 on pci0
pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib4
pcib0: allocated type 3 (0xfe700000-0xfe7fffff) for rid 20 of pcib4
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xfe700000-0xfe7fffff
pci4: <ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
found-> vendor=0x197b, dev=0x2362, revid=0x10
domain=0, bus=4, slot=0, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xc040, size 3, enabled
pcib4: allocated I/O port range (0xc040-0xc047) for rid 10 of pci0:4:0:0
map[14]: type I/O Port, range 32, base 0xc030, size 2, enabled
pcib4: allocated I/O port range (0xc030-0xc033) for rid 14 of pci0:4:0:0
map[18]: type I/O Port, range 32, base 0xc020, size 3, enabled
pcib4: allocated I/O port range (0xc020-0xc027) for rid 18 of pci0:4:0:0
map[1c]: type I/O Port, range 32, base 0xc010, size 2, enabled
pcib4: allocated I/O port range (0xc010-0xc013) for rid 1c of pci0:4:0:0
map[20]: type I/O Port, range 32, base 0xc000, size 4, enabled
pcib4: allocated I/O port range (0xc000-0xc00f) for rid 20 of pci0:4:0:0
map[24]: type Memory, range 32, base 0xfe710000, size 9, enabled
pcib4: allocated memory range (0xfe710000-0xfe7101ff) for rid 24 of pci0:4:0:0
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 51
atapci0: <JMicron JMB362 SATA300 controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xfe710000-0xfe7101ff irq 51 at device 0.0 on pci4
ioapic1: routing intpin 27 (PCI IRQ 51) to lapic 4 vector 48
ahci0: <JMicron JMB362 AHCI SATA controller> at channel -1 on atapci0
ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 2ports
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps: HPCP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps: HPCP
pcib5: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0
pcib0: allocated type 3 (0xfe600000-0xfe6fffff) for rid 20 of pcib5
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: memory decode 0xfe600000-0xfe6fffff
pci5: <ACPI PCI bus> on pcib5
pcib5: allocated bus range (5-5) for rid 0 of pci5
pci5: domain=0, physical bus=5
found-> vendor=0x1b21, dev=0x1042, revid=0x00
domain=0, bus=5, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xfe600000, size 15, enabled
pcib5: allocated memory range (0xfe600000-0xfe607fff) for rid 10 of pci0:5:0:0
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 50
xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe600000-0xfe607fff irq 50 at device 0.0 on pci5
xhci1: 32 bytes context size, 32-bit DMA
xhci1: Unable to map MSI-X table
xhci1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 263 to local APIC 5 vector 48
xhci1: using IRQ 263 for MSI
xhci1: MSI enabled
usbus1 on xhci1
xhci1: usbpf: Attached
usbus1: 5.0Gbps Super Speed USB v3.0
pcib6: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib6
pcib0: allocated type 3 (0xfe500000-0xfe5fffff) for rid 20 of pcib6
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xb000-0xbfff
pcib6: memory decode 0xfe500000-0xfe5fffff
pci6: <ACPI PCI bus> on pcib6
pcib6: allocated bus range (6-6) for rid 0 of pci6
pci6: domain=0, physical bus=6
found-> vendor=0x197b, dev=0x2362, revid=0x10
domain=0, bus=6, slot=0, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xb040, size 3, enabled
pcib6: allocated I/O port range (0xb040-0xb047) for rid 10 of pci0:6:0:0
map[14]: type I/O Port, range 32, base 0xb030, size 2, enabled
pcib6: allocated I/O port range (0xb030-0xb033) for rid 14 of pci0:6:0:0
map[18]: type I/O Port, range 32, base 0xb020, size 3, enabled
pcib6: allocated I/O port range (0xb020-0xb027) for rid 18 of pci0:6:0:0
map[1c]: type I/O Port, range 32, base 0xb010, size 2, enabled
pcib6: allocated I/O port range (0xb010-0xb013) for rid 1c of pci0:6:0:0
map[20]: type I/O Port, range 32, base 0xb000, size 4, enabled
pcib6: allocated I/O port range (0xb000-0xb00f) for rid 20 of pci0:6:0:0
map[24]: type Memory, range 32, base 0xfe510000, size 9, enabled
pcib6: allocated memory range (0xfe510000-0xfe5101ff) for rid 24 of pci0:6:0:0
pcib6: matched entry for 6.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 47
atapci1: <JMicron JMB362 SATA300 controller> port 0xb040-0xb047,0xb030-0xb033,0xb020-0xb027,0xb010-0xb013,0xb000-0xb00f mem 0xfe510000-0xfe5101ff irq 47 at device 0.0 on pci6
ioapic1: routing intpin 23 (PCI IRQ 47) to lapic 0 vector 54
ahci1: <JMicron JMB362 AHCI SATA controller> at channel -1 on atapci1
ahci1: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
ahci1: Caps: 64bit NCQ ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 2ports
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich2: Caps: HPCP
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich3: Caps: HPCP
ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe90b000-0xfe90b3ff irq 19 at device 17.0 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50
ahci2: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahci2: Caps: 64bit NCQ SNTF MPS ALP AL CLO 6Gbps PM PMD SSC PSC 32cmd eSATA 6ports
ahci2: Caps2:
ahcich4: <AHCI channel> at channel 0 on ahci2
ahcich4: Caps: ESP
ahcich5: <AHCI channel> at channel 1 on ahci2
ahcich5: Caps: ESP
ahcich6: <AHCI channel> at channel 2 on ahci2
ahcich6: Caps: ESP
ahcich7: <AHCI channel> at channel 3 on ahci2
ahcich7: Caps: ESP
ahcich8: <AHCI channel> at channel 4 on ahci2
ahcich8: Caps: ESP
ahcich9: <AHCI channel> at channel 5 on ahci2
ahcich9: Caps: ESP
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe90a000-0xfe90afff irq 18 at device 18.0 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 2 vector 49
usbus2 on ohci0
ohci0: usbpf: Attached
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe909000-0xfe9090ff irq 17 at device 18.2 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 3 vector 49
ehci0: Dropped interrupts workaround enabled
usbus3: EHCI version 1.0
usbus3 on ehci0
ehci0: usbpf: Attached
usbus3: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe908000-0xfe908fff irq 20 at device 19.0 on pci0
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 4 vector 49
usbus4 on ohci1
ohci1: usbpf: Attached
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe907000-0xfe9070ff irq 21 at device 19.2 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 5 vector 49
ehci1: Dropped interrupts workaround enabled
usbus5: EHCI version 1.0
usbus5 on ehci1
ehci1: usbpf: Attached
usbus5: 480Mbps High Speed USB v2.0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac1: <ATI SB600 HDA Controller> mem 0xfe900000-0xfe903fff irq 16 at device 20.2 on pci0
hdac1: PCI card vendor: 0x1043, device: 0x8410
hdac1: HDA Driver Revision: 20120126_0002
hdac1: Config options: on=0x00000000 off=0x00000000
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 55
hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib7
pcib0: allocated type 3 (0xfe400000-0xfe4fffff) for rid 20 of pcib7
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xa000-0xafff
pcib7: memory decode 0xfe400000-0xfe4fffff
pcib7: special decode subtractive
pci7: <ACPI PCI bus> on pcib7
pcib7: allocated bus range (7-7) for rid 0 of pci7
pci7: domain=0, physical bus=7
found-> vendor=0x1106, dev=0x3044, revid=0xc0
domain=0, bus=7, slot=6, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe400000, size 11, enabled
pcib7: allocated memory range (0xfe400000-0xfe4007ff) for rid 10 of pci0:7:6:0
map[14]: type I/O Port, range 32, base 0xa000, size 7, enabled
pcib7: allocated I/O port range (0xa000-0xa07f) for rid 14 of pci0:7:6:0
pcib7: matched entry for 7.6.INTA
pcib7: slot 6 INTA hardwired to IRQ 21
fwohci0: <VIA Fire II (VT6306)> port 0xa000-0xa07f mem 0xfe400000-0xfe4007ff irq 21 at device 6.0 on pci7
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:32:10
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xa43c000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe906000-0xfe906fff irq 18 at device 20.5 on pci0
usbus6 on ohci2
ohci2: usbpf: Attached
usbus6: 12Mbps Full Speed USB v1.0
pcib8: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pcib0: allocated type 4 (0x8000-0x9fff) for rid 1c of pcib8
pcib0: allocated type 3 (0xfe100000-0xfe3fffff) for rid 20 of pcib8
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 11
pcib8: I/O decode 0x8000-0x9fff
pcib8: memory decode 0xfe100000-0xfe3fffff
pci8: <ACPI PCI bus> on pcib8
pcib8: allocated bus range (8-8) for rid 0 of pci8
pci8: domain=0, physical bus=8
found-> vendor=0x10b5, dev=0x8604, revid=0xba
domain=0, bus=8, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit, vector masks
map[10]: type Memory, range 32, base 0xfe300000, size 17, enabled
pcib8: allocated memory range (0xfe300000-0xfe31ffff) for rid 10 of pci0:8:0:0
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 16
secbus=9, subbus=11
pcib8: allocated bus range (9-11) for rid 0 of pci0:8:0:0
pcib9: <PCI-PCI bridge> mem 0xfe300000-0xfe31ffff irq 16 at device 0.0 on pci8
pcib8: allocated I/O port range (0x8000-0x9fff) for rid 1c of pcib9
pcib8: allocated memory range (0xfe100000-0xfe2fffff) for rid 20 of pcib9
pcib9: domain 0
pcib9: secondary bus 9
pcib9: subordinate bus 11
pcib9: I/O decode 0x8000-0x9fff
pcib9: memory decode 0xfe100000-0xfe2fffff
pci9: <PCI bus> on pcib9
pcib9: allocated bus range (9-9) for rid 0 of pci9
pci9: domain=0, physical bus=9
found-> vendor=0x10b5, dev=0x8604, revid=0xba
domain=0, bus=9, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit, vector masks
pcib8: matched entry for 8.0.INTB
pcib8: slot 0 INTB hardwired to IRQ 17
pcib9: slot 1 INTA is routed to irq 17
secbus=10, subbus=10
pcib9: allocated bus range (10-10) for rid 0 of pci0:9:1:0
found-> vendor=0x10b5, dev=0x8604, revid=0xba
domain=0, bus=9, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit, vector masks
pcib8: matched entry for 8.0.INTB
pcib8: slot 0 INTB hardwired to IRQ 17
pcib9: slot 5 INTA is routed to irq 17
secbus=11, subbus=11
pcib9: allocated bus range (11-11) for rid 0 of pci0:9:5:0
pcib10: <PCI-PCI bridge> irq 17 at device 1.0 on pci9
pcib9: allocated I/O port range (0x9000-0x9fff) for rid 1c of pcib10
pcib9: allocated memory range (0xfe200000-0xfe2fffff) for rid 20 of pcib10
pcib10: domain 0
pcib10: secondary bus 10
pcib10: subordinate bus 10
pcib10: I/O decode 0x9000-0x9fff
pcib10: memory decode 0xfe200000-0xfe2fffff
pci10: <PCI bus> on pcib10
pcib10: allocated bus range (10-10) for rid 0 of pci10
pci10: domain=0, physical bus=10
found-> vendor=0x1103, dev=0x0640, revid=0x01
domain=0, bus=10, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x9090, size 3, enabled
pcib10: allocated I/O port range (0x9090-0x9097) for rid 10 of pci0:10:0:0
map[14]: type I/O Port, range 32, base 0x9080, size 2, enabled
pcib10: allocated I/O port range (0x9080-0x9083) for rid 14 of pci0:10:0:0
map[18]: type I/O Port, range 32, base 0x9070, size 3, enabled
pcib10: allocated I/O port range (0x9070-0x9077) for rid 18 of pci0:10:0:0
map[1c]: type I/O Port, range 32, base 0x9060, size 2, enabled
pcib10: allocated I/O port range (0x9060-0x9063) for rid 1c of pci0:10:0:0
map[20]: type I/O Port, range 32, base 0x9050, size 4, enabled
pcib10: allocated I/O port range (0x9050-0x905f) for rid 20 of pci0:10:0:0
map[24]: type Memory, range 32, base 0xfe221000, size 11, enabled
pcib10: allocated memory range (0xfe221000-0xfe2217ff) for rid 24 of pci0:10:0:0
pcib8: matched entry for 8.0.INTB
pcib8: slot 0 INTB hardwired to IRQ 17
pcib9: slot 1 INTA is routed to irq 17
pcib10: slot 0 INTA is routed to irq 17
found-> vendor=0x1b4b, dev=0x91a4, revid=0x11
domain=0, bus=10, slot=0, func=1
class=01-01-8f, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x9040, size 3, enabled
pcib10: allocated I/O port range (0x9040-0x9047) for rid 10 of pci0:10:0:1
map[14]: type I/O Port, range 32, base 0x9030, size 2, enabled
pcib10: allocated I/O port range (0x9030-0x9033) for rid 14 of pci0:10:0:1
map[18]: type I/O Port, range 32, base 0x9020, size 3, enabled
pcib10: allocated I/O port range (0x9020-0x9027) for rid 18 of pci0:10:0:1
map[1c]: type I/O Port, range 32, base 0x9010, size 2, enabled
pcib10: allocated I/O port range (0x9010-0x9013) for rid 1c of pci0:10:0:1
map[20]: type I/O Port, range 32, base 0x9000, size 4, enabled
pcib10: allocated I/O port range (0x9000-0x900f) for rid 20 of pci0:10:0:1
map[24]: type Memory, range 32, base 0xfe220000, size 4, enabled
pcib10: allocated memory range (0xfe220000-0xfe22000f) for rid 24 of pci0:10:0:1
pcib8: matched entry for 8.0.INTC
pcib8: slot 0 INTC hardwired to IRQ 18
pcib9: slot 1 INTB is routed to irq 18
pcib10: slot 0 INTB is routed to irq 18
ahci3: <HighPoint RocketRAID 640 AHCI SATA controller> port 0x9090-0x9097,0x9080-0x9083,0x9070-0x9077,0x9060-0x9063,0x9050-0x905f mem 0xfe221000-0xfe2217ff irq 17 at device 0.0 on pci10
ahci3: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 264 to local APIC 1 vector 51
ahci3: using IRQ 264 for MSI
ahci3: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahci3: Caps: 64bit NCQ SNTF AL 6Gbps PM FBS PMD SSC PSC 32cmd eSATA 2ports
ahcich10: <AHCI channel> at channel 0 on ahci3
ahcich10: Caps: CPD ESP FBSCP
ahcich11: <AHCI channel> at channel 1 on ahci3
ahcich11: Caps: CPD ESP FBSCP
ahci_mv_twsi0: <Marvell I2C Bus in AHCI Controller> on ahci3
iicbus0: <Philips I2C bus> on ahci_mv_twsi0
ahci_mv_led0: <I2C-based LED control on Marvell controller> at addr 0xe on iicbus0
atapci2: <Marvell 88SE912x UDMA133 controller> port 0x9040-0x9047,0x9030-0x9033,0x9020-0x9027,0x9010-0x9013,0x9000-0x900f mem 0xfe220000-0xfe22000f irq 18 at device 0.1 on pci10
pcib11: <PCI-PCI bridge> irq 17 at device 5.0 on pci9
pcib9: allocated I/O port range (0x8000-0x8fff) for rid 1c of pcib11
pcib9: allocated memory range (0xfe100000-0xfe1fffff) for rid 20 of pcib11
pcib11: domain 0
pcib11: secondary bus 11
pcib11: subordinate bus 11
pcib11: I/O decode 0x8000-0x8fff
pcib11: memory decode 0xfe100000-0xfe1fffff
pci11: <PCI bus> on pcib11
pcib11: allocated bus range (11-11) for rid 0 of pci11
pci11: domain=0, physical bus=11
found-> vendor=0x1103, dev=0x0640, revid=0x01
domain=0, bus=11, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x8090, size 3, enabled
pcib11: allocated I/O port range (0x8090-0x8097) for rid 10 of pci0:11:0:0
map[14]: type I/O Port, range 32, base 0x8080, size 2, enabled
pcib11: allocated I/O port range (0x8080-0x8083) for rid 14 of pci0:11:0:0
map[18]: type I/O Port, range 32, base 0x8070, size 3, enabled
pcib11: allocated I/O port range (0x8070-0x8077) for rid 18 of pci0:11:0:0
map[1c]: type I/O Port, range 32, base 0x8060, size 2, enabled
pcib11: allocated I/O port range (0x8060-0x8063) for rid 1c of pci0:11:0:0
map[20]: type I/O Port, range 32, base 0x8050, size 4, enabled
pcib11: allocated I/O port range (0x8050-0x805f) for rid 20 of pci0:11:0:0
map[24]: type Memory, range 32, base 0xfe121000, size 11, enabled
pcib11: allocated memory range (0xfe121000-0xfe1217ff) for rid 24 of pci0:11:0:0
pcib8: matched entry for 8.0.INTB
pcib8: slot 0 INTB hardwired to IRQ 17
pcib9: slot 5 INTA is routed to irq 17
pcib11: slot 0 INTA is routed to irq 17
found-> vendor=0x1b4b, dev=0x91a4, revid=0x11
domain=0, bus=11, slot=0, func=1
class=01-01-8f, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x8040, size 3, enabled
pcib11: allocated I/O port range (0x8040-0x8047) for rid 10 of pci0:11:0:1
map[14]: type I/O Port, range 32, base 0x8030, size 2, enabled
pcib11: allocated I/O port range (0x8030-0x8033) for rid 14 of pci0:11:0:1
map[18]: type I/O Port, range 32, base 0x8020, size 3, enabled
pcib11: allocated I/O port range (0x8020-0x8027) for rid 18 of pci0:11:0:1
map[1c]: type I/O Port, range 32, base 0x8010, size 2, enabled
pcib11: allocated I/O port range (0x8010-0x8013) for rid 1c of pci0:11:0:1
map[20]: type I/O Port, range 32, base 0x8000, size 4, enabled
pcib11: allocated I/O port range (0x8000-0x800f) for rid 20 of pci0:11:0:1
map[24]: type Memory, range 32, base 0xfe120000, size 4, enabled
pcib11: allocated memory range (0xfe120000-0xfe12000f) for rid 24 of pci0:11:0:1
pcib8: matched entry for 8.0.INTC
pcib8: slot 0 INTC hardwired to IRQ 18
pcib9: slot 5 INTB is routed to irq 18
pcib11: slot 0 INTB is routed to irq 18
ahci4: <HighPoint RocketRAID 640 AHCI SATA controller> port 0x8090-0x8097,0x8080-0x8083,0x8070-0x8077,0x8060-0x8063,0x8050-0x805f mem 0xfe121000-0xfe1217ff irq 17 at device 0.0 on pci11
ahci4: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 265 to local APIC 2 vector 50
ahci4: using IRQ 265 for MSI
ahci4: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahci4: Caps: 64bit NCQ SNTF AL 6Gbps PM FBS PMD SSC PSC 32cmd eSATA 2ports
ahcich12: <AHCI channel> at channel 0 on ahci4
ahcich12: Caps: CPD ESP FBSCP
ahcich13: <AHCI channel> at channel 1 on ahci4
ahcich13: Caps: CPD ESP FBSCP
ahci_mv_twsi1: <Marvell I2C Bus in AHCI Controller> on ahci4
iicbus1: <Philips I2C bus> on ahci_mv_twsi1
iicbus1: <unknown card> at addr 0xe
atapci3: <Marvell 88SE912x UDMA133 controller> port 0x8040-0x8047,0x8030-0x8033,0x8020-0x8027,0x8010-0x8013,0x8000-0x800f mem 0xfe120000-0xfe12000f irq 18 at device 0.1 on pci11
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe905000-0xfe905fff irq 22 at device 22.0 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 3 vector 50
usbus7 on ohci3
ohci3: usbpf: Attached
usbus7: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe904000-0xfe9040ff irq 23 at device 22.2 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 4 vector 50
ehci2: Dropped interrupts workaround enabled
usbus8: EHCI version 1.0
usbus8 on ehci2
ehci2: usbpf: Attached
usbus8: 480Mbps High Speed USB v2.0
amd_dct0: <AMD Memory Controller> on hostb3
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
amdtemp0: Found 6 cores and 1 sensors.
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 5 vector 50
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56
uart0: fast interrupt
uart0: PPS capture mode: DCD
ivhd0: <AMD-Vi/IOMMU or ivhd> on acpi0
ivhd0: Flag:3e<PassPW,ResPassPW,Isoc,IotlbSup,Coherent>
ivhd0: max supported paging level:7 restricting to: 4
ivhd0: device supported range [0x0 - 0xb01]
ivhd0: device [0xa0 - 0xa0]config:d7<INIT,ExtInt,NMI,LINT0>
ivhd0: PCI cap 0x10b540f@0x40 feature:1<IOTLB>
msi: routing MSI IRQ 266 to local APIC 1 vector 52
acpi0: wakeup code va 0xfffffe090c9d1000 pa 0x99000
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xce7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xce800-0xcefff) for rid 1 of orm0
pcib0: allocated type 3 (0xce800-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0
pcib0: allocated type 4 (0x2e-0x2f) for rid 0 of superio0
pcib0: allocated type 4 (0x4e-0x4f) for rid 0 of superio1
isa_probe_children: disabling PnP devices
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd17ff on isa0
sc0 failed to probe on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
VESA: INT 0x10 vector 0xc000:0x1979
VESA: information block
0000 56 45 53 41 00 03 00 01 00 93 01 00 00 00 22 00
0010 00 93 e0 00 28 80 07 01 00 93 1a 01 00 93 36 01
0020 00 93 00 01 01 01 02 01 03 01 04 01 05 01 06 01
0030 07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01
0040 18 01 1a 01 1b 01 30 01 31 01 32 01 33 01 34 01
0050 35 01 36 01 3d 01 3e 01 ff ff 00 00 00 00 00 00
0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100 4e 56 49 44 49 41 00 4e 56 49 44 49 41 20 43 6f
0110 72 70 6f 72 61 74 69 6f 6e 00 47 4b 32 30 38 20
0120 42 6f 61 72 64 20 2d 20 32 31 33 31 5f 30 30 31
0130 30 5f 33 30 32 00 43 68 69 70 20 52 65 76 20 20
0140 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 27 mode(s) found
amdfch0: <AMD FCH / Southbride support driver> at port 0xcd6-0xcd7 on isa0
pcib0: allocated type 4 (0xcd6-0xcd7) for rid 0 of amdfch0
amdsbwd0: <AMD SB8xx/SB9xx Watchdog Timer> on amdfch0
amdsbwd0: ResetStatus = 0x40000800
pcib0: allocated type 3 (0xfec000f0-0xfec000f7) for rid 0 of amdsbwd0
amdfchsmb0: <AMD SB8xx/9xx SMBus Controller> on amdfch0
pcib0: allocated type 4 (0xb00-0xb0f) for rid 0 of amdfchsmb0
smbus0: <System Management Bus> on amdfchsmb0
smb0: <SMBus generic I/O> on smbus0
jedec_ts0: <ST DIMM temperature sensor> at addr 0x30 on smbus0
jedec_ts1: <ST DIMM temperature sensor> at addr 0x32 on smbus0
jedec_ts2: <ST DIMM temperature sensor> at addr 0x34 on smbus0
jedec_ts3: <Atmel DIMM temperature sensor> at addr 0x36 on smbus0
pcib0: allocated type 4 (0x2e-0x2f) for rid 0 of superio0
superio0: <ITE IT8721 SuperIO (revision 0x01)> at port 0x2e-0x2f on isa0
it0: <Environment Controller on ITE SuperIO> at HWM ldn 0x04 on superio0
pcib0: allocated type 4 (0x290-0x295) for rid 0 of it0
it0: applied overrides for M5A99X EVO
isa_probe_children: probing PnP devices
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
AcpiOsExecute: task queue not started
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Device configuration finished.
procfs registered
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
lo0: bpf attached
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 262144
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to deny, logging disabled
AcpiOsExecute: enqueue 6 pending tasks
ahcich0: AHCI reset...
hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x10438525
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 4 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 6 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0
hdaa0: 7 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0
ahcich0: SATA connect timeout time=10000us status=00000000
hdaa0: ahcich0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
AHCI reset: device not found
hdaa0: 4 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
ahcich1: hdaa0: AHCI reset...
5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 6 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
ahcich1: hdaa0: SATA connect time=100us status=00000113
ahcich1: AHCI reset: device found
ahcich1: 7 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
AHCI reset: device ready after 0ms
hdaa0: 2 associations found:
ahcich2: hdaa0: Association 0 (15) out:
hdaa0: Pin nid=4 seq=0
hdaa0: Association 1 (15) out:
AHCI reset...
hdaa0: Pin nid=5 seq=0
hdaa0: Tracing association 0 (15)
hdaa0: Pin 4 traced to DAC 8
hdaa0: Association 0 (15) trace succeeded
hdaa0: Tracing association 1 (15)
hdaa0: Pin 5 traced to DAC 9
hdaa0: Association 1 (15) trace succeeded
hdaa0: Looking for additional DAC for association 0 (15)
hdaa0: Looking for additional DAC for association 1 (15)
hdaa0: Tracing input monitor
hdaa0: Tracing other input monitors
hdaa0: Tracing beeper
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm0: Playback:
pcm0: Stream cap: 0x00000005 AC3 PCM
pcm0: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz
pcm0: DAC: 8
pcm0:
ahcich2: pcm0: nid=4 [pin: Digital-out (Jack)]
pcm0: + <- nid=8 [audio output] [src: pcm]
pcm0: SATA connect timeout time=10000us status=00000000
ahcich2: AHCI reset: device not found
ahcich3: AHCI reset...
pcm0: Mixer "vol" -> "none": child=0x00000010
pcm0: Mixer "pcm": parent="vol"
pcm0: Soft PCM mixer ENABLED
pcm0: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: Playback:
pcm1: Stream cap: 0x00000005 AC3 PCM
pcm1: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz
pcm1: DAC: 9
ahcich3: pcm1:
pcm1: nid=5 [pin: Digital-out (Jack)]SATA connect timeout time=10000us status=00000000
ahcich3: AHCI reset: device not found
ahcich4: pcm1: + <- nid=9 [audio output]AHCI reset...
[src: pcm]
pcm1:
ahcich4: SATA connect time=100us status=00000133
ahcich4: AHCI reset: device found
pcm1: Mixer "vol" -> "none": child=0x00000010
pcm1: Mixer "pcm": parent="vol"
ahcich5: pcm1: Soft PCM mixer ENABLED
AHCI reset...
ahcich5: SATA connect time=100us status=00000133
ahcich5: AHCI reset: device found
ahcich6: AHCI reset...
pcm1: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
ahcich6: SATA connect time=100us status=00000133
ahcich6: AHCI reset: device found
ahcich7: AHCI reset...
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
ahcich7: SATA connect time=100us status=00000133
hdaa1: ahcich7: AHCI reset: device found
Subsystem ID: 0x10438410
ahcich8: AHCI reset...
hdaa1: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa1: GPIO0: disabled
hdaa1: GPIO1: disabled
ahcich8: SATA connect timeout time=10000us status=00000000
ahcich8: AHCI reset: device not found
hdaa1: Original pins configuration:
ahcich9: hdaa1: nid 0x as seq device conn jack loc color misc
AHCI reset...
hdaa1: 17 99430140 4 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa1: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0
hdaa1: 21 01011012 1 2 Line-out Jack 1/8 Rear Black 0
hdaa1: 22 01016011 1 1 Line-out Jack 1/8 Rear Orange 0
hdaa1: 23 01012014 1 4 Line-out Jack 1/8 Rear Grey 0
hdaa1: 24 01a19850 5 0 Mic Jack 1/8 Rear Pink 8
hdaa1: 25 02a19c60 6 0 Mic Jack 1/8 Front Pink 12
hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0
hdaa1: 27 02214c20 2 0 Headphones Jack 1/8 Front Green 12
hdaa1: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: 29 4005e601 0 1 Line-out None Optical 0x00 White 6
hdaa1: 30 01456130 3 0 SPDIF-out Jack Optical Rear Orange 1
hdaa1: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa1: Patching widget caps nid=29 0x00400400 -> 0x00700400
hdaa1: Patching pin config nid=20 0x01014010 -> 0x0121411f
hdaa1: Patching pin config nid=21 0x01011012 -> 0x01011010
hdaa1: Patching pin config nid=22 0x01016011 -> 0x01016000
hdaa1: Patching pin config nid=23 0x01012014 -> 0x01012000
ahcich9: SATA connect timeout time=10000us status=00000000
ahcich9: AHCI reset: device not found
hdaa1: Patched pins configuration:
ahcich10: hdaa1: AHCI reset...
nid 0x as seq device conn jack loc color misc
hdaa1: 17 99430140 4 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
ahcich10: hdaa1: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
SATA connect time=100us status=00000123
ahcich10: AHCI reset: device found
hdaa1: 20 0121411f 1 15 Headphones Jack 1/8 Rear Green 1
ahcich11: hdaa1: 21 01011010 1 0 Line-out Jack 1/8 Rear Black 0
AHCI reset...
hdaa1: 22 01016000 0 0 Line-out Jack 1/8 Rear Orange 0 DISA
hdaa1: 23 01012000 0 0 Line-out Jack 1/8 Rear Grey 0 DISA
ahcich11: hdaa1: 24 01a19850 5 0 Mic Jack 1/8 Rear Pink 8
SATA connect time=100us status=00000123
hdaa1: 25 02a19c60 6 0 Mic Jack 1/8 Front Pink 12
ahcich11: AHCI reset: device found
hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0
ahcich12: hdaa1: AHCI reset...
27 02214c20 2 0 Headphones Jack 1/8 Front Green 12
hdaa1: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa1: ahcich12: 30 01456130 3 0 SPDIF-out Jack Optical Rear Orange 1
SATA connect time=100us status=00000123
hdaa1: ahcich12: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
AHCI reset: device found
hdaa1: 6 associations found:
hdaa1: Association 0 (1) out:
hdaa1: Pin nid=21 seq=0
ahcich13: hdaa1: Pin nid=20 seq=15
hdaa1: AHCI reset...
Association 1 (2) out:
hdaa1: Pin nid=27 seq=0
hdaa1: Association 2 (3) out:
hdaa1: Pin nid=30 seq=0
hdaa1: Association 3 (4) out:
hdaa1: Pin nid=17 seq=0
hdaa1: Association 4 (5) in:
hdaa1: Pin nid=24 seq=0
hdaa1: Pin nid=26 seq=15
hdaa1: Association 5 (6) in:
hdaa1: Pin nid=25 seq=0
hdaa1: Tracing association 0 (1)
hdaa1: Pin 21 traced to DAC 3
hdaa1: Unable to trace pin 20 seq 15 with min nid 0 and hpredir 0
hdaa1: Unable to trace pin 21 seq 0 with min nid 4
hdaa1: Pin 21 traced to DAC 3 with fake redirection
hdaa1: Pin 20 traced to DAC 2 with fake redirection
hdaa1: Association 0 (1) trace succeeded
hdaa1: Tracing association 1 (2)
hdaa1: Pin 27 traced to DAC 4
hdaa1: Association 1 (2) trace succeeded
hdaa1: Tracing association 2 (3)
ahcich13: hdaa1: SATA connect timeout time=10000us status=00000000
ahcich13: AHCI reset: device not found
Pin 30 traced to DAC 6
hdaa1: Association 2 (3) trace succeeded
hdaa1: Tracing association 3 (4)
hdaa1: Pin 17 traced to DAC 16
hdaa1: Association 3 (4) trace succeeded
hdaa1: Tracing association 4 (5)
hdaa1: Pin 24 traced to ADC 8
hdaa1: Pin 26 traced to ADC 8
hdaa1: Association 4 (5) trace succeeded
hdaa1: Tracing association 5 (6)
hdaa1: Pin 25 traced to ADC 9
hdaa1: Association 5 (6) trace succeeded
hdaa1: Looking for additional DAC for association 0 (1)
hdaa1: Looking for additional DAC for association 1 (2)
hdaa1: Looking for additional DAC for association 2 (3)
hdaa1: Looking for additional DAC for association 3 (4)
hdaa1: Looking for additional ADC for association 4 (5)
hdaa1: Looking for additional ADC for association 5 (6)
hdaa1: Tracing input monitor
hdaa1: Tracing nid 11 to out
hdaa1: nid 11 is input monitor
hdaa1: Tracing nid 34 to out
hdaa1: Tracing nid 35 to out
hdaa1: Tracing other input monitors
hdaa1: Tracing nid 24 to out
hdaa1: Tracing nid 25 to out
hdaa1: Tracing nid 26 to out
hdaa1: Tracing beeper
hdaa1: No presence detection support at nid 20
hdaa1: Pin sense: nid=21 sense=0x80000000 (connected)
hdaa1: Pin sense: nid=24 sense=0x80000000 (connected)
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm2: <Realtek ALC892 (Rear Analog 2.0+HP/2.0)> at nid 21,20 and 24,26 on hdaa1
pcm2: Playback:
pcm2: Stream cap: 0x00000001 PCM
pcm2: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm2: DAC: 3 2
pcm2:
pcm2: nid=21 [pin: Line-out (Black Jack)]
pcm2: + <- nid=13 [audio mixer] [src: pcm, mix]
pcm2: + <- nid=3 [audio output] [src: pcm]
pcm2: + <- nid=11 [audio mixer] [src: mix]
pcm2:
pcm2: nid=20 [pin: Headphones (Green Jack)]
pcm2: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm2: + <- nid=2 [audio output] [src: pcm]
pcm2: + <- nid=11 [audio mixer] [src: mix]
pcm2:
pcm2: Record:
pcm2: Stream cap: 0x00000001 PCM
pcm2: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm2: ADC: 8
pcm2:
pcm2: nid=8 [audio input]
pcm2: + <- nid=35 [audio mixer] [src: speaker, line, mic, mix]
pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm2: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm2: + <- nid=29 [beep widget] [src: speaker]
pcm2: + <- nid=11 [audio mixer] [src: mix]
pcm2:
pcm2: Input Mix:
pcm2:
pcm2: nid=11 [audio mixer]
pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm2: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm2: + <- nid=29 [beep widget] [src: speaker]
pcm2:
pcm2: Master Volume (OSS: vol): -64/0dB
pcm2: +- ctl 1 (nid 2 out): -64/0dB (65 steps)
pcm2: +- ctl 2 (nid 3 out): -64/0dB (65 steps)
pcm2: +- ctl 17 (nid 12 in 0): mute
pcm2: +- ctl 18 (nid 12 in 1): mute
pcm2: +- ctl 19 (nid 13 in 0): mute
pcm2: +- ctl 20 (nid 13 in 1): mute
pcm2: +- ctl 25 (nid 20 in ): mute
pcm2: +- ctl 26 (nid 21 in ): mute
pcm2:
pcm2: PCM Volume (OSS: pcm): -64/0dB
pcm2: +- ctl 1 (nid 2 out): -64/0dB (65 steps)
pcm2: +- ctl 2 (nid 3 out): -64/0dB (65 steps)
pcm2: +- ctl 17 (nid 12 in 0): mute
pcm2: +- ctl 19 (nid 13 in 0): mute
pcm2:
pcm2: Microphone Volume (OSS: mic): 0/30dB
pcm2: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm2: +- ctl 30 (nid 24 out): 0/30dB (4 steps)
pcm2: +- ctl 49 (nid 35 in 0): mute
pcm2:
pcm2: Line-in Volume (OSS: line): 0/30dB
pcm2: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm2: +- ctl 34 (nid 26 out): 0/30dB (4 steps)
pcm2: +- ctl 51 (nid 35 in 2): mute
pcm2:
pcm2: Speaker/Beep Volume (OSS: speaker): -34/12dB
pcm2: +- ctl 12 (nid 11 in 5): -34/12dB (32 steps) + mute
pcm2: +- ctl 54 (nid 35 in 5): mute
pcm2:
pcm2: Recording Level (OSS: rec): -16/30dB
pcm2: +- ctl 5 (nid 8 in 0): -16/30dB (47 steps) + mute
pcm2: +- ctl 49 (nid 35 in 0): mute
pcm2: +- ctl 51 (nid 35 in 2): mute
pcm2: +- ctl 54 (nid 35 in 5): mute
pcm2: +- ctl 59 (nid 35 in 10): mute
pcm2:
pcm2: Input Mix Level (OSS: mix): -34/12dB
pcm2: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm2: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm2: +- ctl 12 (nid 11 in 5): -34/12dB (32 steps) + mute
pcm2: +- ctl 18 (nid 12 in 1): mute
pcm2: +- ctl 20 (nid 13 in 1): mute
pcm2: +- ctl 59 (nid 35 in 10): mute
pcm2:
pcm2: Input Monitoring Level (OSS: igain): 0/0dB
pcm2: +- ctl 18 (nid 12 in 1): mute
pcm2: +- ctl 20 (nid 13 in 1): mute
pcm2:
pcm2: Mixer "vol":
pcm2: Mixer "pcm":
pcm2: Mixer "speaker":
pcm2: Mixer "line":
pcm2: Mixer "mic":
pcm2: Mixer "mix":
pcm2: Mixer "rec":
pcm2: Mixer "igain":
pcm2: Mixer "ogain":
pcm2: Playback channel set is: Front Left, Front Right,
pcm2: Playback channel matrix is: 2.0 (connected)
pcm2: Automatically set rec source to: mic
pcm2: Recording channel set is: Front Left, Front Right,
pcm2: Recording channel matrix is: 2.0 (connected)
pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: Playback:
pcm3: Stream cap: 0x00000001 PCM
pcm3: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm3: DAC: 4
pcm3:
pcm3: nid=27 [pin: Headphones (Green Jack)]
pcm3: + <- nid=14 [audio mixer] [src: pcm, mix]
pcm3: + <- nid=4 [audio output] [src: pcm]
pcm3: + <- nid=11 [audio mixer] [src: mix]
pcm3:
pcm3: Record:
pcm3: Stream cap: 0x00000001 PCM
pcm3: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm3: ADC: 9
pcm3:
pcm3: nid=9 [audio input]
pcm3: + <- nid=34 [audio mixer] [src: speaker, monitor]
pcm3: + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor]
pcm3: + <- nid=29 [beep widget] [src: speaker]
pcm3:
pcm3: Master Volume (OSS: vol): -64/0dB
pcm3: +- ctl 3 (nid 4 out): -64/0dB (65 steps)
pcm3: +- ctl 21 (nid 14 in 0): mute
pcm3: +- ctl 22 (nid 14 in 1): mute
pcm3: +- ctl 35 (nid 27 in ): mute
pcm3:
pcm3: PCM Volume (OSS: pcm): -64/0dB
pcm3: +- ctl 3 (nid 4 out): -64/0dB (65 steps)
pcm3: +- ctl 21 (nid 14 in 0): mute
pcm3:
pcm3: Microphone2 Volume (OSS: monitor): 0/30dB
pcm3: +- ctl 32 (nid 25 out): 0/30dB (4 steps)
pcm3: +- ctl 38 (nid 34 in 1): mute
pcm3:
pcm3: Speaker/Beep Volume (OSS: speaker)
pcm3: +- ctl 42 (nid 34 in 5): mute
pcm3:
pcm3: Recording Level (OSS: rec): -16/30dB
pcm3: +- ctl 6 (nid 9 in 0): -16/30dB (47 steps) + mute
pcm3: +- ctl 32 (nid 25 out): 0/30dB (4 steps)
pcm3: +- ctl 38 (nid 34 in 1): mute
pcm3: +- ctl 42 (nid 34 in 5): mute
pcm3:
pcm3: Input Mix Level (OSS: mix)
pcm3: +- ctl 22 (nid 14 in 1): mute
pcm3:
pcm3: Input Monitoring Level (OSS: igain): 0/0dB
pcm3: +- ctl 22 (nid 14 in 1): mute
pcm3:
pcm3: Mixer "vol":
pcm3: Mixer "pcm":
pcm3: Mixer "rec":
pcm3: Mixer "igain":
pcm3: Mixer "ogain":
pcm3: Mixer "monitor":
pcm3: Playback channel set is: Front Left, Front Right,
pcm3: Playback channel matrix is: 2.0 (disconnected)
pcm3: Recording channel set is: Front Left, Front Right,
pcm3: Recording channel matrix is: 2.0 (disconnected)
pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm4: Playback:
pcm4: Stream cap: 0x00000005 AC3 PCM
pcm4: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz
pcm4: DAC: 6
pcm4:
pcm4: nid=30 [pin: SPDIF-out (Orange Jack)]
pcm4: + <- nid=6 [audio output] [src: pcm]
pcm4:
pcm4: Mixer "vol" -> "none": child=0x00000010
pcm4: Mixer "pcm": parent="vol"
pcm4: Soft PCM mixer ENABLED
pcm4: Playback channel set is: Front Left, Front Right,
pcm4: Playback channel matrix is: 2.0 (unknown)
pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
pcm5: Playback:
pcm5: Stream cap: 0x00000005 AC3 PCM
pcm5: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz
pcm5: DAC: 16
pcm5:
pcm5: nid=17 [pin: SPDIF-out (Fixed)]
pcm5: + <- nid=16 [audio output] [src: pcm]
pcm5:
pcm5: Mixer "vol" -> "none": child=0x00000010
pcm5: Mixer "pcm": parent="vol"
pcm5: Soft PCM mixer ENABLED
pcm5: Playback channel set is: Front Left, Front Right,
pcm5: Playback channel matrix is: 2.0 (unknown)
ugen7.1: <ATI OHCI root HUB> at usbus7
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen8.1: <ATI EHCI root HUB> at usbus8
ugen5.1: <ATI EHCI root HUB> at usbus5
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
ugen6.1: <ATI OHCI root HUB> at usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
ahcich4: AHCI reset: device ready after 100ms
ugen3.1: <ATI EHCI root HUB> at usbus3
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 0
ugen2.1: <ATI OHCI root HUB> at usbus2
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
ahcich5: devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 2
uhub6: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
AHCI reset: device ready after 100ms
ahcich6: AHCI reset: device ready after 100ms
uhub7: ahcich7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
AHCI reset: device ready after 100ms
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ahcich11: AHCI reset: device ready after 100ms
ahcich12: AHCI reset: device ready after 100ms
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 8
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 3
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 13
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 2
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 9
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 8
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 0
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 13
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 3
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 2
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 9
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 8
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 7
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 1
devstat_search: HELP! no appropriate device for name 0xffffffff80a1d999 unit 8
ahcich10: AHCI reset: device ready after 300ms
uhub1: 2 ports with 2 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub8: 5 ports with 5 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub7: 5 ports with 5 removable, self powered
ugen2.2: <Logitech USB Laser Mouse> at usbus2
pass0 at ahcich1 bus 0 scbus1 target 0 lun 0
pass0: <Optiarc DVD RW AD-7191S 1.02> Removable CD-ROM SCSI device
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass1 at ahcich4 bus 0 scbus4 target 0 lun 0
pass1: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device
pass1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
pass1: Command Queueing enabled
pass2 at ahcich5 bus 0 scbus5 target 0 lun 0
pass2: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device
pass2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
pass2: Command Queueing enabled
pass3 at ahcich6 bus 0 scbus6 target 0 lun 0
pass3: <Hitachi HUA723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device
pass3: [_SERIAL_NUMBER_XXXXXXXXXXX]
pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
pass3: Command Queueing enabled
pass4 at ahcich7 bus 0 scbus7 target 0 lun 0
pass4: <HGST HUS724030ALA640 MF8OAA70> ATA8-ACS SATA 3.x device
pass4: [_SERIAL_NUMBER_XXXXXXXXXXX]
pass4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
pass4: Command Queueing enabled
pass5 at ahcich10 bus 0 scbus11 target 0 lun 0
pass5: <WDC WD5000AAKS-00A7B2 01.03B01> ATA8-ACS SATA 2.x device
pass5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass5: Command Queueing enabled
pass6 at ahcich11 bus 0 scbus12 target 0 lun 0
pass6: <ST3500418AS CC49> ATA8-ACS SATA 2.x device
pass6: [_SERIAL_NUMBER_XXXXX]
pass6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass6: Command Queueing enabled
pass7 at ahcich12 bus 0 scbus13 target 0 lun 0
pass7: <ST3500312CS SS16> ATA8-ACS SATA 2.x device
pass7: [_SERIAL_NUMBER_XXXXX]
pass7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass7: Command Queueing enabled
GEOM: new disk cd0
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <Optiarc DVD RW AD-7191S 1.02> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt
ada1 at ahcich5 bus 0 scbus5 target 0 lun 0
ada1: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada2 at ahcich6 bus 0 scbus6 target 0 lun 0
ada2: <Hitachi HUA723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors)
ada3 at ahcich7 bus 0 scbus7 target 0 lun 0
ada3: <HGST HUS724030ALA640 MF8OAA70> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors)
ada4 at ahcich10 bus 0 scbus11 target 0 lun 0
ada4: <WDC WD5000AAKS-00A7B2 01.03B01> ATA8-ACS SATA 2.x device
ada4: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 476940MB (976773168 512 byte sectors)
ada5 at ahcich11 bus 0 scbus12 target 0 lun 0
ada5: <ST3500418AS CC49> ATA8-ACS SATA 2.x device
ada5: [_SERIAL_NUMBER_XXXXX]
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 476940MB (976773168 512 byte sectors)
GEOM: new disk ada0
ada6 at ahcich12 bus 0 scbus13 target 0 lun 0
ada6: <ST3500312CS SS16> ATA8-ACS SATA 2.x device
ada6: [_SERIAL_NUMBER_XXXXX]
ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 476940MB (976773168 512 byte sectors)
GEOM: new disk ada1
GEOM: new disk ada2
GEOM: new disk ada3
GEOM: new disk ada4
GEOM: new disk ada5
GEOM: new disk ada6
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> K8/4/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:rpool/ROOT/20171102 []...
ugen4.2: <Arduino www.arduino.cc product 0x0043> at usbus4
GEOM_MIRROR: Device mirror/swap launched (2/2).
Reconstructed root pool config:
version: 5000
name: rpool
state: 0
txg: 18136437
pool_guid: 3306452622839683353
hostid: 714261228
hostname: trant
vdev_children: 2
features_for_read:
com.delphix:hole_birth: true
com.delphix:embedded_data: true
vdev_tree:
type: root
id: 0
guid: 3306452622839683353
children:
children[0]:
type: mirror
id: 0
guid: 4493550133349417612
metaslab_array: 35
metaslab_shift: 29
ashift: 12
asize: 104996274176
is_log: 0
create_txg: 4
children:
children[0]:
type: disk
id: 0
guid: 6534450629031371913
path: /dev/ada1p6
whole_disk: 1
DTL: 7374
create_txg: 4
children[1]:
type: disk
id: 1
guid: 7527090677965656705
path: /dev/ada0p6
whole_disk: 1
DTL: 7373
create_txg: 4
children[1]:
type: mirror
id: 1
guid: 9307972404872233923
metaslab_array: 16809
metaslab_shift: 24
ashift: 12
asize: 1069023232
is_log: 1
create_txg: 1166755
children:
children[0]:
type: disk
id: 0
guid: 6130852463369935863
path: /dev/ada1p3
whole_disk: 1
DTL: 10862
create_txg: 1166755
children[1]:
type: disk
id: 1
guid: 5524987472349668866
path: /dev/ada0p3
whole_disk: 1
DTL: 10861
create_txg: 1166755
atrtc0: providing initial system time
start_init: trying /sbin/init
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap1: Ethernet address: [_MAC_XXXXXXXXXX]
tap2: Ethernet address: [_MAC_XXXXXXXXXX]
re0: changing name to 'neti'
neti: promiscuous mode enabled
tap0: promiscuous mode enabled
tap1: promiscuous mode enabled
tap2: promiscuous mode enabled
ums0 on uhub8
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/56.01, addr 2> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
umodem0 on uhub2
umodem0: <Arduino www.arduino.cc product 0x0043, class 2/0, rev 1.10/0.01, addr 2> on usbus4
umodem0: data interface 1, has CM over data, has break
pflog0: promiscuous mode enabled