Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 15:08:54
From: Rick Macklem
Description: cheap HP laptop
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r336739: Thu Jul 26 17:00:25 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1366x768
CPU: AMD A4-5000 APU with Radeon(TM) HD Graphics (1497.23-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x700f01 Family=0x16 Model=0x0 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I>
Structured Extended Features=0x8<BMI1>
XSAVE Features=0x1<XSAVEOPT>
SVM: (disabled in BIOS) NP,NRIP,AFlush,DAssist,NAsids=8
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3513237504 (3350 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-MPC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
arc4random: no preloaded entropy cache
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 3 2 1
Timecounter "TSC" frequency 1497225331 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9b00, 0) error 19
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xe0000000-0xefffffff,0xf0000000-0xf07fffff,0xf0b00000-0xf0b3ffff at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9840) HDA Controller> mem 0xf0b40000-0xf0b43fff at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci1: <ACPI PCI bus> on pcib2
pci1: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 2.5 on pci0
pci2: <ACPI PCI bus> on pcib3
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0900000-0xf0900fff,0xf0800000-0xf0803fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x44800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
xhci0: <AMD FCH USB 3.0 controller> mem 0xf0b48000-0xf0b49fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4118-0x411f,0x4124-0x4127,0x4110-0x4117,0x4120-0x4123,0x4100-0x410f mem 0xf0b4f000-0xf0b4f3ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xf0b4e000-0xf0b4efff at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD FCH USB 2.0 controller> mem 0xf0b4d000-0xf0b4d0ff at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD FCH USB Controller> mem 0xf0b4c000-0xf0b4cfff at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xf0b4b000-0xf0b4b0ff at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <AMD Hudson-2 HDA Controller> mem 0xf0b44000-0xf0b47fff at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xf0b4a000-0xf0b4a0ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (226.9C)
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
arc4random: no preloaded entropy cache
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC282 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC282 (Analog)> at nid 20 and 25 on hdaa1
pcm2: <Realtek ALC282 (Analog)> at nid 33 and 18 on hdaa1
ugen1.1: <AMD OHCI root HUB> at usbus1
ugen4.1: <AMD EHCI root HUB> at usbus4
ugen2.1: <AMD EHCI root HUB> at usbus2
ugen3.1: <AMD OHCI root HUB> at usbus3
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ACPI Error: No handler for Region [RCM0] (0xfffff80003524880) [SystemCMOS]ugen0.1: <0x1022 XHCI root HUB> at usbus0
(20180629/evregion-288)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20180629/exfldio-428)
uhub4: ACPI Error: Method parse/execution failed \134_SB.WMID.ESDT, AE_NOT_EXIST (20180629/psparse-677)
ACPI Error: Method parse/execution failed \134_SB.PCI0.LPC0.EC0._Q42, AE_NOT_EXIST (20180629/psparse-677)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MQ01ABF050 AM0P2C> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp DVDRW SU208GB HH00> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 839MB (429728 2048 byte sectors)
acpi_ec0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
evaluation of query method _Q42 failed: AE_NOT_EXIST
WARNING: WITNESS option enabled, expect reduced performance.
uhub2: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen4.2: <Sonix Technology Co., Ltd. HP Truevision HD> at usbus4
mountroot> Trying to mount root from ufs:/dev/ada0p6 []...
random: unblocking device.
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
re0: link state changed to UP