Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 17:44:09
From: tengin
Description: HP ProDesk 600 G1 SFF / FreeBSD 11.2
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #0: Thu Sep 6 07:14:16 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 1280x1024
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (3591.75-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16507211776 (15742 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-BPC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1795875720 Hz quality 1000
random: entropy device external interface
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \134_SB_.PCI0.LPCB.LDRC - AE_AML_INVALID_RESOURCE_TYPE
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7220000-0xf722ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xf7200000-0xf721ffff,0xf7239000-0xf7239fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7238000-0xf72383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7230000-0xf7233fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib3
xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xf7100000-0xf7101fff irq 17 at device 0.0 on pci2
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7237000-0xf72373ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7236000-0xf72367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> port 0x100-0x107 on acpi0
acpi_tz1: <Thermal Zone> port 0x100-0x107 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC221 (Analog)> at nid 23 and 27,26 on hdaa1
pcm3: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <0x1912 XHCI root HUB> at usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub3: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <hp DVD A DS8ABSH AHS9> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 PRO 256GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA DT01ACA050 MS1OA7C0> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
uhub3: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus1 usbus0
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 1> on usbus0
uhub4: MTT enabled
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub5 on uhub0
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8000> at usbus3
uhub6 on uhub1
uhub6: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus3
Root mount waiting for: usbus3 usbus1 usbus0
uhub4: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0
uhub7 on uhub4
uhub7: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 2> on usbus0
uhub7: MTT enabled
Root mount waiting for: usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.4: <CHICONY HP Basic USB Keyboard> at usbus0
ukbd0 on uhub3
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 2.00/1.30, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <Kensington Kensington Expert Mouse> at usbus0
Root mount waiting for: usbus0
ugen0.6: <GenesysLogic USB3.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic> on usbus0
uhub8: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.7: <vendor 0x05e3 product 0x0612> at usbus0
uhub9 on uhub8
uhub9: <> on usbus0
Root mount waiting for: usbus0
uhub9: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub9
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 7> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: 30436MB (62333952 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
random: unblocking device.
nvidia0: <Quadro K620> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.77 Tue Jul 10 21:54:30 PDT 2018
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
tap81: Ethernet address: [_MAC_XXXXXXXXXX]
em0: promiscuous mode enabled
bridge0: link state changed to UP
tap81: promiscuous mode enabled
bridge0: link state changed to DOWN
ums0 on uhub3
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/2.01, addr 4> on usbus0
ums0: 4 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
bridge0: link state changed to UP
ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 1, addr 1 (disconnected)
ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 2 (disconnected)
uhub7: detached
uhub4: detached
ugen0.6: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 16, addr 5 (disconnected)
ugen0.7: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 6 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub9, port 4, addr 7 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 10> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 11> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 12> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: 30436MB (62333952 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 10 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 11 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 8 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 9 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 12 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 15> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 16> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 17> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
tun0: link state changed to UP
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 15 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 16 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 13 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 14 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 17 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 20> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 21> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 22> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.9: <Kingston DataTraveler 3.0> at usbus0
umass1 on uhub3
umass1: <Kingston DataTraveler 3.0, class 0/0, rev 3.10/1.00, addr 23> on usbus0
umass1: SCSI over Bulk-Only; quirks = 0x8100
umass1:6:1: Attached to scbus6
da1 at umass-sim1 bus 1 scbus6 target 0 lun 0
da1: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da1: 400.000MB/s transfers
da1: 14784MB (30277632 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
in_scrubprefix: err=65, prefix delete failed
tun0: link state changed to DOWN
tun0: link state changed to UP
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 20 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 21 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 18 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 19 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 22 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 26> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 27> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 28> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 26 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 27 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 24 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 25 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 28 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 31> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 32> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 31 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 32 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 29 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 30 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 6> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 5> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 11> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 6 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 5 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 1 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 7 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 11 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 9> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 8> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 16> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.6: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 9 (disconnected)
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 8 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 10 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 12 (disconnected)
ugen0.8: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 16 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 14> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 13> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.8: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 21> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub8: at uhub3, port 1, addr 13 (disconnected)
ugen0.8: <GenesysLogic USB2.0 Hub> at usbus0 (disconnected)
uhub9: at uhub8, port 4, addr 21 (disconnected)
uhub9: detached
uhub8: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0 (disconnected)
uhub4: at uhub3, port 16, addr 15 (disconnected)
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0 (disconnected)
uhub7: at uhub4, port 4, addr 17 (disconnected)
ugen0.6: <Generic USB Storage> at usbus0 (disconnected)
umass0: at uhub7, port 4, addr 14 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> s/n 000000000813 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub7: detached
uhub4: detached
ugen0.2: <GenesysLogic USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <GenesysLogic> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 product 0x0612> at usbus0
uhub7 on uhub4
uhub7: <> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.6: <Generic USB Storage> at usbus0
umass0 on uhub7
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 19> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.7: <GenesysLogic USB2.0 Hub> at usbus0
uhub8 on uhub3
uhub8: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 18> on usbus0
uhub8: MTT enabled
uhub8: 4 ports with 4 removable, self powered
ugen0.8: <GenesysLogic USB2.0 Hub> at usbus0
uhub9 on uhub8
uhub9: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 27> on usbus0
uhub9: MTT enabled
uhub9: 4 ports with 3 removable, self powered
ifa_maintain_loopback_route: deletion failed for interface tun0: 3
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 7d21h15m22s
nvidia-modeset: Unloading
uhub9: detached
uhub8: detached
ukbd0: detached
ums0: detached
umass0: detached
uhub7: detached
uhub4: detached
umass1: detached
uhub5: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 1280x1024
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (3591.76-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17683185664 (16864 MB)
avail memory = 16507211776 (15742 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-BPC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1795881110 Hz quality 1000
random: entropy device external interface
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \134_SB_.PCI0.LPCB.LDRC - AE_AML_INVALID_RESOURCE_TYPE
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7220000-0xf722ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xf7200000-0xf721ffff,0xf7239000-0xf7239fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7238000-0xf72383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7230000-0xf7233fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib3
xhci1: <NEC uPD720202 USB 3.0 controller> mem 0xf7100000-0xf7101fff irq 17 at device 0.0 on pci2
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7237000-0xf72373ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7236000-0xf72367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> port 0x100-0x107 on acpi0
acpi_tz1: <Thermal Zone> port 0x100-0x107 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC221 (Analog)> at nid 23 and 27,26 on hdaa1
pcm3: <Realtek ALC221 (Analog 2.0+HP)> at nid 20,33 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen2.1: <0x1912 XHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
cd0: <hp DVD A DS8ABSH AHS9> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 PRO 256GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA DT01ACA050 MS1OA7C0> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub3: 4 ports with 4 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus1 usbus0
uhub2: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <GenesysLogic USB2.0 Hub> at usbus0
uhub4 on uhub0
uhub4: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/4.01, addr 1> on usbus0
uhub4: MTT enabled
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8000> at usbus3
uhub6 on uhub1
uhub6: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus3
Root mount waiting for: usbus3 usbus1 usbus0
uhub4: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
ugen0.3: <GenesysLogic USB2.0 Hub> at usbus0
uhub7 on uhub4
uhub7: <GenesysLogic USB2.0 Hub, class 9/0, rev 2.10/40.11, addr 2> on usbus0
uhub7: MTT enabled
Root mount waiting for: usbus0
uhub7: 4 ports with 3 removable, self powered
random: unblocking device.
ugen0.4: <CHICONY HP Basic USB Keyboard> at usbus0
ukbd0 on uhub0
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 2.00/1.30, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <Kensington Kensington Expert Mouse> at usbus0
Root mount waiting for: usbus0
ugen0.6: <GenesysLogic USB3.0 Hub> at usbus0
uhub8 on uhub0
uhub8: <GenesysLogic> on usbus0
uhub8: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.7: <vendor 0x05e3 product 0x0612> at usbus0
uhub9 on uhub8
uhub9: <> on usbus0
Root mount waiting for: usbus0
uhub9: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.8: <Generic USB Storage> at usbus0
umass0 on uhub9
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.13, addr 7> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:5:0: Attached to scbus5
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0813> Removable Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
nvidia0: <Quadro K620> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.77 Tue Jul 10 21:54:30 PDT 2018
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
tap81: Ethernet address: [_MAC_XXXXXXXXXX]
em0: promiscuous mode enabled
bridge0: link state changed to UP
tap81: promiscuous mode enabled
bridge0: link state changed to DOWN
ums0 on uhub0
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/2.01, addr 4> on usbus0
ums0: 4 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
bridge0: link state changed to UP