Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 20:55:07
From: mizhka
Description: FreeBSD 12 on MIPS32 Asus RT-N53
---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-ALPHA7 27950c52f7f(user/mizhka/robosw-r338952) BCM mips gcc version 4.2.1 20070831 patched [FreeBSD] real memory = 32899072 (32128K bytes) avail memory = 25583616 (24MB) arc4random: no preloaded entropy cache random: entropy device external interface nexus0: <MIPS32 root nexus> bhnd_nvram0: <Broadcom> on nexus0 bhnd0: <BCM5357 BCMA bus> at mem 0x18000000-0x180fffff on nexus0 bhnd0: core 5: can't find RID by port number: 0 bhnd0: core 7: can't find RID by port number: 0 bhnd0: core 10: can't find RID by port number: 0 bhnd0: core 11: can't find RID by port number: 0 bhnd0: core 12: can't find RID by port number: 0 bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 38> mem 0x18000000-0x18000fff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x18100000-0x18100fff,0x18108000-0x18108fff irq 8 at core 0 on bhnd0 gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000fff on bhnd_chipc0 gpiobus0: <GPIO bus> on gpio0 cpupic0: <MIPS32 Interrupt Controller> on nexus0 bcm_mips0: <MIPS MIPS74k CPU, rev 4> mem 0x18003000-0x18003fff,0x18103000-0x18103fff irq 11 at core 3 on bhnd0 bhnd_pmu0: <Broadcom ChipCommon PMU, rev 9> on bhnd_chipc0 clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 250000000 Hz quality 800 Event timer "MIPS32" frequency 250000000 Hz quality 800 gpioc0: <GPIO controller> on gpio0 uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 14 on bhnd_chipc0 uart0: console (115200,n,8,1) spi0: <Broadcom ChipCommon SPI> mem 0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0 spibus0: <SPI bus> on spi0 nvram2env0: Found NVRAM at 0x803c0fa4 nvram2env0: <NVRAM to ENV pseudo-device> on spi0 nvram2env0: sig = 0x48534c46 nvram2env0: size = 0xfdc mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 28> mem 0x18001000-0x18001fff,0x18101000-0x18101fff irq 9 at core 1 (no driver attached) bhnd0: <Broadcom Gigabit MAC core, rev 3> mem 0x18002000-0x18002fff,0x18008000-0x18008fff,0x18102000-0x18102fff irq 10 at core 2 (no driver attached) bhnd_usb0: <USB2.0 Host core> mem 0x18004000-0x18004fff,0x18009000-0x18009fff,0x18104000-0x18104fff irq 12 at core 4 on bhnd0 bhnd_usb0: bhnd: USB HOST 2.0 setup for rev 5 bhnd_usb0: bhnd: ehci: irq=15 maddr=0x18004000 bhnd_usb0: bhnd: ohci: irq=16 maddr=0x18004000 ehci0: <Broadcom EHCI> at mem 18004000-18004fff irq 0 on bhnd_usb0 bhnd_usb0: bhnd: trying allocate def 3 - 0 for ehci0 bhnd_usb0: bhnd: trying allocate def 1 - 0 for ehci0 usbus0: EHCI version 1.0 usbus0 on ehci0 bhnd0: <Broadcom DDR1/DDR2 Memory Controller, rev 2> mem 0x18005000-0x18005fff,0-0x7ffffff,0x10000000-0x17ffffff,0x80000000-0xbfffffff,0x18105000-0x18105fff at core 5 (no driver attached) bhnd0: <Broadcom I2S Digital Audio Interface, rev 2> mem 0x18006000-0x18006fff,0x18106000-0x18106fff irq 13 at core 6 (no driver attached) bhnd0: <Broadcom Internal Memory, rev 11> mem 0x18007000-0x18007fff,0x1e000000-0x1e01ffff,0x18107000-0x18107fff at core 7 (no driver attached) Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 Trying to mount root from ufs:ufs/FBSD []... mx25l0: bhnd: Firmware image [0x30524448]: 0x20000 - 0x7f8000 ugen0.1: <Broadcom EHCI root HUB> at usbus0 uhub0: <Broadcom EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Warning: no time-of-day clock registered, system time will not be set accurately uhub0: 2 ports with 2 removable, self powered ugen0.2: <Broadcom Remote Download Wireless Adapter> at usbus0 2018-10-08T08:23:20.891552+00:00 init 19 - - login_getclass: unknown class 'daemon' *** Mounting /tmp, /var, /etc ... random: unblocking device. *** Copying /c/etc -> /etc ... *** Starting rc2 ... *** Populating /var .. ls: /dev/cfi*.cfg: No such file or directory *** Loading configuration files .. ls: /dev/cfi*.cfg: No such file or directory *** Restoring from /dev/flash/spi0s.cfg .. gunzip: invalid compressed data--crc error etc/cfg/manifest 1+0 records in 1+0 records out etc/master.passwd etc/group 65536 bytes transferred in 8.495681 secs (7714 bytes/sec) etc/cfg/rc.conf etc/profile 10 blocks *** Completed. *** setting up hostname *** Load kernel modules .. bgmac bgmac0: <BHND Gigabit MAC> mem 0x18002000-0x18002fff,0x18008000-0x18008fff,0x18102000-0x18102fff irq 10 at core 2 on bhnd0 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_CTRL =00000000 (OFF,DMA,,,PARITYCHK,off:00000000,ext:00000000) bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_INDEX =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_RINGLOW =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_RINGHIGH =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_STATE =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_ERROR =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_CTRL =00000008 (OFF,DMA,,,PARITYCHK,off:00000008,ext:00000000) bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_INDEX =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_RINGLOW =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_RINGHIGH =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_STATE =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_ERROR =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_CMD_CFG =1800054<Prom> bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_RX_MAX_LEN =000005ee bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DEVICE_CONTROL =00300011 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DEVICE_STATUS =04110100 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_BIST_STATUS =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTR_STATUS =10<MDIO> bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTERRUPT_MASK =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_GP_TIMER =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTR_RECV_LAZY =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_PWR_CTL =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_FLOW_CTL_THRESH =026602cc bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_PAUSE_CTL =0002ffff bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_TXQ_CTL =00000200 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_RXQ_CTL =06000001 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_CLOCK_CONTROL_ST =030b0100 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_DEFERED =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_Q0_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_Q0_OCTETS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_GOOD_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_GOOD_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_JABBER_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_OVERSIZE_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_UNDERRUNS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_EXCESSIVE_COLS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_LATE_COLS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_JABBER_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_OVERSIZE_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_MISSED_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_CRC_ALIGN =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_UNDERSIZE =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_CRC =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_ALIGN =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_SYMBOL =00000000 bgmac0: Ethernet address: [_MAC_XXXXXXXXXX] bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_CTRL =00000801 (ON,DMA,,,,off:00000000,ext:00000000) bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_INDEX =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_RINGLOW =013b6000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_RINGHIGH =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_STATE =20000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_ERROR =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_CTRL =00000c3d (ON,DMA,,OVERFLOWCNT,,off:0000003c,ext:00000000) bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_INDEX =00000400 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_RINGLOW =01305000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_RINGHIGH =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_STATE =10000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_ERROR =00000010 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_CMD_CFG =31800058<Prom> bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_RX_MAX_LEN =000005ee bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DEVICE_CONTROL =00300001 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DEVICE_STATUS =04110100 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_BIST_STATUS =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTR_STATUS =0 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTERRUPT_MASK =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_GP_TIMER =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTR_RECV_LAZY =01000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_PWR_CTL =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_FLOW_CTL_THRESH =026602cc bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_PAUSE_CTL =0002ffff bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_TXQ_CTL =00000200 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_RXQ_CTL =06000001 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_CLOCK_CONTROL_ST =020b0002 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_DEFERED =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_Q0_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_Q0_OCTETS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_GOOD_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_GOOD_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_JABBER_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_OVERSIZE_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_UNDERRUNS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_EXCESSIVE_COLS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_LATE_COLS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_JABBER_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_OVERSIZE_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_MISSED_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_CRC_ALIGN =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_UNDERSIZE =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_CRC =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_ALIGN =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_SYMBOL =00000000 mdio0: <MDIO> on bgmac0 .. bridgestp kldload: can't load bridgestp: No such file or directory .. if_bridge kldload: can't load if_bridge: No such file or directory .. random kldload: can't load random: No such file or directory *** Setting kern.random.harvest.mask=511 kern.random.harvest.mask: 2047 -> 511 *** bringing up loopback .. lo0: link state changed to UP *** Default password/login databases .. *** Customising sysctl .. *** Starting networking via /etc/rc.d/base/net *** Interface: bgmac0: start bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_CTRL =00000801 (ON,DMA,,,,off:00000000,ext:00000000) bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_INDEX =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_RINGLOW =013b6000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_RINGHIGH =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_STATE =20000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_TX_ERROR =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_CTRL =00000c3d (ON,DMA,,OVERFLOWCNT,,off:0000003c,ext:00000000) bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_INDEX =00000400 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_RINGLOW =01305000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_RINGHIGH =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_STATE =10000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DMA_RX_ERROR =00000010 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_CMD_CFG =3180005b<Tx,Rx,Prom> bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_RX_MAX_LEN =000005ee bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DEVICE_CONTROL =00300001 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_DEVICE_STATUS =04110100 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_BIST_STATUS =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTR_STATUS =0 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTERRUPT_MASK =0f01fc10 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_GP_TIMER =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_INTR_RECV_LAZY =01000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_PWR_CTL =00000000 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_FLOW_CTL_THRESH =026602cc bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_PAUSE_CTL =0002ffff bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_TXQ_CTL =00000200 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_REG_RXQ_CTL =06000001 bgmac0: [BHND info] bgmac_print_debug:158 => BGMAC_CLOCK_CONTROL_ST =020b0002 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_DEFERED =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_Q0_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_TX_Q0_OCTETS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_GOOD_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_GOOD_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_BYTES =00000000 bgmac0: [BHND info] bgmac_print_debug:159 => BGMAC_MIB_RX_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_JABBER_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_OVERSIZE_PKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_UNDERRUNS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_EXCESSIVE_COLS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_TX_ERR_LATE_COLS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_JABBER_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_OVERSIZE_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_MISSED_PCKTS =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_CRC_ALIGN =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_UNDERSIZE =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_CRC =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_ALIGN =00000000 bgmac0: [BHND info] bgmac_print_debug:160 => BGMAC_MIB_RX_ERR_SYMBOL =00000000 *** Interface: bgmac0: done /etc/rc.d/base/net: /etc/rc.d/net/: Permission denied /etc/rc.d/base/net: /etc/rc.d/net/: Permission denied /etc/rc.d/base/net: /etc/rc.d/net/: Permission denied *** Interface: bridge0: start ifconfig: SIOCIFCREATE2: Invalid argument ifconfig: interface bridge0 does not exist ifconfig: interface bridge0 does not exist ifconfig: interface bridge0 does not exist *** Interface: bridge0: done ipfw: setsockopt(IP_FW_XDEL): Protocol not available *** Done! FreeBSD/mips (RT-N53) (ttyu0) login: