Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-08 23:02:32
From: unrelenting.technology
Description: FreeBSD/powerpc on an iBook G4 (CD boot and reroot into CF card, invalid memory access when booted directly from CF)
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #0 ff3aa0a697c(master)-dirty: Tue Oct 9 00:13:17 MSK 2018
[_EMAIL_XXXXXXXX]:/usr/obj/usr/src/powerpc.powerpc/sys/GENERIC-NODEBUG powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1024x768
cpu0: Motorola PowerPC 7447A revision 1.2, 599.35 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory = 1309106176 (1248 MB)
avail memory = 1263689728 (1205 MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
dfs0: <Dynamic Frequency Switching> on cpu0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 208, bank1 generation 209
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 210
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
iicbus0: <OFW I2C bus> on iichb0
adt746x0: <Apple Thermostat Unit ADT746X> at addr 0x15c on iicbus0
iicbus0: <unknown card> at addr 0x1c0
pcib0: <Apple UniNorth Host-PCI bridge> mem 0xf0000000-0xf1ffffff irq 45 on ofwbus0
pci0: <OFW PCI bus> on pcib0
agp0: <Apple UniNorth 2 AGP Bridge> on hostb0
vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0x98000000-0x9fffffff,0x90000000-0x9000ffff irq 48 at device 16.0 on pci0
backlight0: <PowerBook backlight for ATI graphics> on vgapci0
vgapci0: Boot video device
pcib1: <Apple UniNorth Host-PCI bridge> mem 0xf2000000-0xf3ffffff irq 45 on ofwbus0
pci1: <OFW PCI bus> on pcib1
macio0: <Intrepid I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pmuextint0: <Apple PMU99 External Interrupt> extint-gpio 1 irq 47 on macgpio0
vcoregpio0: <CPU Core Voltage Control> gpio 1 on macgpio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2,31,3,4 on macio0
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: registered as a time-of-day clock, resolution 0.001000s
adb0: <Apple Desktop Bus> on pmu0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iicbus1: <OFW I2C bus> on iichb1
iicbus1: <unknown card> at addr 0x1c0
snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
ata0: <Apple MacIO ATA Controller> mem 0x20000-0x20fff,0x8800-0x88ff irq 24,12 on macio0
pci1: <network> at device 18.0 (no driver attached)
ohci0: <Apple KeyLargo/Intrepid USB controller> mem 0x80083000-0x80083fff irq 29 at device 26.0 on pci1
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 63 at device 27.0 on pci1
usbus1 on ohci1
ohci2: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 63 at device 27.1 on pci1
usbus2 on ohci2
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 63 at device 27.2 on pci1
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci3: <Apple KeyLargo/Intrepid USB controller> at device 24.0 on pci1
usbus4 on ohci3
ohci4: <Apple KeyLargo/Intrepid USB controller> at device 25.0 on pci1
usbus5 on ohci4
pcib2: <Apple UniNorth Host-PCI bridge> mem 0xf4000000-0xf5ffffff irq 45 on ofwbus0
pci2: <OFW PCI bus> on pcib2
ata1: <Intrepid Kauai ATA Controller> mem 0xf5004000-0xf5007fff irq 39 at device 13.0 on pci2
fwohci0: <Apple UniNorth 2> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:a2:3c
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple UniNorth2 GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
miibus0: <MII bus> on gem0
bmtphy0: <BCM5221 10/100 media interface> PHY 0 on miibus0
bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: [_MAC_XXXXXXXXXX]
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 18432000 Hz quality 0
Event timer "decrementer" frequency 18432000 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Apple OHCI root HUB> at usbus0
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC OHCI root HUB> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <NEC OHCI root HUB> at usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <NEC EHCI root HUB> at usbus3
uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
uhub0: 2 ports with 2 removable, self powered
ugen4.1: <Apple OHCI root HUB> at usbus4
uhub4: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5: 12Mbps Full Speed USB v1.0
uhub1: 3 ports with 3 removable, self powered
ugen5.1: <Apple OHCI root HUB> at usbus5
uhub5: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub2: 2 ports with 2 removable, self powered
adt746x0: Dev ID 0x68, Company ID 0x41, Rev ID 0x71 CNF: 0x5
adt746x0: 1 fans detected!
adt746x0: 5 sensors detected!
akbd0: <iBook Keyboard> at device 2 on adb0
kbd1 at akbd0
ams0: <ADB Mouse> at device 3 on adb0
uhub4: 2 ports with 2 removable, self powered
ams0: ADB Mouse = 0xd (Extended Mode)
uhub5: 2 ports with 2 removable, self powered
ams0: 4-button 400-dpi Touchpad
abtn0: <ADB Brightness/Volume/Eject Buttons> at device 7 on adb0
uhub3: 5 ports with 5 removable, self powered
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA CD-RW CW-8123 CA10> Removable CD-ROM SCSI device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 395MB (202409 2048 byte sectors)
ada0 at ata1 bus 0 scbus1 target 1 lun 0
ada0: <CF CARD 20110927> ATA-7 device
ada0: [_SERIAL_NUMBER_XXXXX] 00011689
ada0: 66.700MB/s transfers (UDMA4, PIO 512bytes)
ada0: 61064MB (125059072 512 byte sectors)
Trying to mount root from cd9660:/dev/iso9660/12_0_ALPHA8_POWERPC_CD [ro]...
random: unblocking device.
lo0: link state changed to UP
Trying to mount root from ufs:/dev/ada0s3 [ro]...
warning: total configured swap (690173 pages) exceeds maximum recommended amount (618016 pages).
warning: increase kern.maxswzone or reduce amount of swap.
gem0: link state changed to DOWN
gem0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)