Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-09 11:26:37
From: gj
Description: FreeBSD/amd64 on ASUS PRIME B350M-A
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #7 r339081: Tue Oct 2 18:10:20 CEST 2018
[_EMAIL_XXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/ernst amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
CPU: AMD Ryzen 5 1600 Six-Core Processor (3194.07-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x800f11 Family=0x17 Model=0x1 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16566218752 (15798 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
arc4random: no preloaded entropy cache
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 11 6 10 1 9 8 4 5 7 3 2
Timecounter "TSC-low" frequency 1597036000 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.87 Tue Aug 21 15:53:31 PDT 2018
nexus0
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <AMD 300 Series USB 3.0 controller> mem 0xf77a0000-0xf77a7fff irq 32 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 300 Series AHCI SATA controller> mem 0xf7780000-0xf779ffff irq 33 at device 0.1 on pci1
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7600000-0xf7607fff irq 32 at device 0.0 on pci3
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci2
pci6: <ACPI PCI bus> on pcib6
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xf7504000-0xf7504fff,0xf7500000-0xf7503fff irq 34 at device 0.0 on pci6
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib7: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci8
nvidia0: <GeForce GTX 750> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xf7080000-0xf7083fff irq 55 at device 0.1 on pci8
pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci2: <AMD KERNCZ USB 3.0 controller> mem 0xf7200000-0xf72fffff irq 37 at device 0.3 on pci9
xhci2: 64 bytes context size, 64-bit DMA
usbus2: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci10: <ACPI PCI bus> on pcib10
pci10: <unknown> at device 0.0 (no driver attached)
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xf7808000-0xf7808fff irq 42 at device 0.2 on pci10
ahci1: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich10: <AHCI channel> at channel 2 on ahci1
ahcich11: <AHCI channel> at channel 3 on ahci1
hdac1: <AMD (0x1457) HDA Controller> mem 0xf7800000-0xf7807fff irq 43 at device 0.3 on pci10
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart1: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
uart2: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0
uart3: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0
uart4: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
acpi_throttle4: failed to attach P_CNT
device_attach: acpi_throttle4 attach returned 6
acpi_throttle5: failed to attach P_CNT
device_attach: acpi_throttle5 attach returned 6
acpi_throttle6: failed to attach P_CNT
device_attach: acpi_throttle6 attach returned 6
acpi_throttle7: failed to attach P_CNT
device_attach: acpi_throttle7 attach returned 6
acpi_throttle8: failed to attach P_CNT
device_attach: acpi_throttle8 attach returned 6
acpi_throttle9: failed to attach P_CNT
device_attach: acpi_throttle9 attach returned 6
acpi_throttle10: failed to attach P_CNT
device_attach: acpi_throttle10 attach returned 6
acpi_throttle11: failed to attach P_CNT
device_attach: acpi_throttle11 attach returned 6
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
arc4random: no preloaded entropy cache
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm4: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <0x1022 XHCI root HUB> at usbus2
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <LITEONIT LCS-128M6S 2.5 7mm 128GB DC7110B> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <CT500MX500SSD1 M3CR020> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <CT1000MX500SSD1 M3CR022> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <TS64GSSD370 N1126KB> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada3: Command Queueing enabled
ada3: 61057MB (125045424 512 byte sectors)
ada4 at ahcich11 bus 0 scbus5 target 0 lun 0
ada4: <SanDisk SDSSDA240G Z33130RL> ACS-2 ATA SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada4: Command Queueing enabled
ada4: 228936MB (468862128 512 byte sectors)
arc4random: no preloaded entropy cache
Trying to mount root from ufs:/dev/ada0p2 [rw]...
uhub1: 4 ports with 4 removable, self powered
uhub2: 8 ports with 8 removable, self powered
uhub0: 22 ports with 22 removable, self powered
ugen2.2: <VIA Labs, Inc. USB2.0 Hub> at usbus2
uhub3 on uhub2
uhub3: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 1> on usbus2
ugen0.2: <vendor 0x0409 product 0x005a> at usbus0
uhub4 on uhub0
uhub4: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub3: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
ugen2.3: <VIA Labs, Inc. USB3.0 Hub> at usbus2
uhub5 on uhub2
uhub5: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 2> on usbus2
ugen0.3: <Chicony Generic USB Hub> at usbus0
uhub6 on uhub4
uhub6: <Chicony Generic USB Hub, class 9/0, rev 1.10/1.02, addr 2> on usbus0
uhub6: 3 ports with 2 removable, bus powered
uhub5: 4 ports with 4 removable, self powered
ugen0.4: <Chicony PFU-65 USB Keyboard> at usbus0
ukbd0 on uhub6
ukbd0: <Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus0
kbd2 at ukbd0
cd0 at ahcich10 bus 0 scbus4 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH20NS10 EL01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
random: unblocking device.
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
ums0 on uhub6
ums0: <Logitech USB-PS/2 Trackball, class 0/0, rev 1.00/2.10, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
.
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP