Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-09 13:47:26
From: naddy
Description: FreeBSD/amd64 on Dell Inc. PowerEdge T20
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0 r339012: Sat Sep 29 15:59:34 CEST 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.68-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33257668608 (31716 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL CBX3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1596339078 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL CBX3 > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7e20000-0xf7e3ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV810 HDA Controller> mem 0xf7e40000-0xf7e43fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7f20000-0xf7f2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0a0-0xf0a7 mem 0xf7f3a000-0xf7f3afff irq 19 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xf7f00000-0xf7f1ffff,0xf7f39000-0xf7f39fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7f38000-0xf7f383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7f30000-0xf7f33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7f37000-0xf7f373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xf7f36000-0xf7f367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2BB240G4 D2010370> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/root [rw]...
random: unblocking device.
uhub2: 21 ports with 21 removable, self powered
[drm] Initialized
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
[drm] radeon kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2127 0x00).
[drm] register mmio base: 0xF7E20000
[drm] register mmio size: 131072
[drm:radeon_device_init] Unable to find PCI I/O BAR
[drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO
ATOM BIOS: 113
drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
Zone kernel: Available graphics memory: 16730154 kiB
Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CEDAR Microcode
radeon/CEDAR_pfp.bin: could not load firmware image, error 2
ugen0.2: <C-Media INC. USB Sound Device> at usbus0
radeon/CEDAR_pfp.bin: could not load firmware image, error 2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen0.3: <vendor 0x0409 product 0x005a> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus0
radeon/CEDAR_me.bin: could not load firmware image, error 2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
radeon/CEDAR_me.bin: could not load firmware image, error 2
uhub5: 3 ports with 2 removable, self powered
radeon/CEDAR_rlc.bin: could not load firmware image, error 2
ugen0.4: <Topre Corporation HHKB Professional> at usbus0
ukbd0 on uhub5
ukbd0: <Topre Corporation HHKB Professional, class 0/0, rev 1.10/1.02, addr 3> on usbus0
kbd2 at ukbd0
radeon/CEDAR_rlc.bin: could not load firmware image, error 2
radeon/CEDAR_smc.bin: could not load firmware image, error 2
ugen0.5: <Logitech USB Optical Mouse> at usbus0
radeon/CEDAR_smc.bin: could not load firmware image, error 2
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
radeon/CYPRESS_uvd.bin: could not load firmware image, error 2
ugen0.6: <EIZO EIZO USB HID Monitor> at usbus0
radeon/CYPRESS_uvd.bin: could not load firmware image, error 2
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
drmn0: WB enabled
drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff8000a5fcc00
drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff8000a5fcc0c
drmn0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xfffff800e005c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ugen0.7: <vendor 0x0409 product 0x005a> at usbus0
uhub6 on uhub2
uhub6: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 6> on usbus0
[drm] ib test on ring 5 succeeded
[drm] hw_i2c forced on, you may experience display detection problems!
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] Connector VGA-1: get mode from tunables:
[drm] - kern.vt.fb.modes.VGA-1
[drm] - kern.vt.fb.default_mode
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xE034D000
[drm] vram apper at 0xE0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=1200 width=1920 depth=32
cmsize=16 size=9216000
pbase=0xe034d000 vbase=0xfffff800e034d000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.48.0 20080528 for drmn on minor 0
uhub6: 4 ports with 4 removable, self powered
lo0: link state changed to UP
ugen0.8: <vendor 0x067b product 0x2303> at usbus0
uplcom0 on uhub6
uplcom0: <vendor 0x067b product 0x2303, class 0/0, rev 1.10/2.02, addr 7> on usbus0
ugen0.9: <FTDI USB HS Serial Converter> at usbus0
uftdi0 on uhub6
uftdi0: <USB HS Serial Converter> on usbus0
ugen0.10: <Prolific Technology Inc. USB-Serial Controller> at usbus0
uplcom1 on uhub6
uplcom1: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 9> on usbus0
ugen0.11: <Prolific Technology Inc. USB-Serial Controller> at usbus0
uplcom2 on uhub6
uplcom2: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 10> on usbus0
ugen0.12: <SoftIron, Inc. OverDrive 1000> at usbus0
em0: link state changed to UP
uaudio0 on uhub2
uaudio0: <C-Media INC. USB Sound Device, class 0/0, rev 1.10/0.10, addr 1> on usbus0
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> on uaudio0
uaudio0: HID volume keys found.