Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-09 14:54:46
From: phicoh
Description: AMD Ryzen 5 2600X / Gigabyte AB350-Gaming-CF
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 1600x1200
CPU: AMD Ryzen 5 2600X Six-Core Processor            (3593.33-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x800f82  Family=0x17  Model=0x8  Stepping=2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
  Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x7<CLZERO,IRPerf,XSaveErPtr>
  SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33262284800 (31721 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20171214/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
SMP: AP CPU #11 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1796665032 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <AMD 300 Series USB 3.0 controller> mem 0xfe8a0000-0xfe8a7fff irq 32 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table 
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 300 Series AHCI SATA controller> mem 0xfe880000-0xfe89ffff irq 33 at device 0.1 on pci1
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfe700000-0xfe700fff,0xf0000000-0xf0003fff irq 32 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 33 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xfe620000-0xfe63ffff irq 32 at device 0.0 on pci5
vgapci0: Boot video device
hdac0: <ATI RV910 HDA Controller> mem 0xfe640000-0xfe643fff irq 33 at device 0.1 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <unknown> at device 0.0 (no driver attached)
pci6: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe300000-0xfe3fffff irq 37 at device 0.3 on pci6
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table 
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib7: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <unknown> at device 0.0 (no driver attached)
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfe908000-0xfe908fff irq 42 at device 0.2 on pci7
ahci1: AHCI v1.31 with 3 6Gbps ports, Port Multiplier supported with FBS
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
ahcich10: <AHCI channel> at channel 2 on ahci1
hdac1: <AMD (0x1457) HDA Controller> mem 0xfe900000-0xfe907fff irq 43 at device 0.3 on pci7
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA HDWD120 MX4OACF0> ATA8-ACS SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA HDWD120 MX4OACF0> ATA8-ACS SATA 3.x device
ada1: Serial Number xxxxxxxx
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <TOSHIBA HDWD120 MX4OACF0> ATA8-ACS SATA 3.x device
ada2: Serial Number xxxxxxxx
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <INTEL SSDSCKKW256G8 LHF002C> ACS-3 ATA SATA 3.x device
ada3: Serial Number xxxxxxxx
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 244198MB (500118192 512 byte sectors)
ada4 at ahcich10 bus 0 scbus6 target 0 lun 0
ada4: <TOSHIBA HDWD130 MX6OACF0> ATA8-ACS SATA 3.x device
ada4: Serial Number xxxxxxxx
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
uhub1: 22 ports with 22 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Logitech Optical USB Mouse> at usbus0
ugen0.3: <Generic Mass Storage Device> at usbus0
umass0 on uhub1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:7:0: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus7 target 0 lun 1
da1: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device
da1: Serial Number xxxxxxxx
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
random: unblocking device.
da2 at umass-sim0 bus 0 scbus7 target 0 lun 2
da2: <Generic- SM/xD-Picture 1.02> Removable Direct Access SCSI device
da2: Serial Number xxxxxxxx
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus7 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device
da3: Serial Number xxxxxxxx
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub1
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub1
uhid0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus0