Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-09 19:03:11
From: phicoh
Description: Compaq Presario 061 (Athlon 64)
Copyright (c) 1992-2018 The FreeBSD Project.                                   
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994       
        The Regents of the University of California. All rights reserved.      
FreeBSD is a registered trademark of The FreeBSD Foundation.                   
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018                  
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64            
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) 64 Processor 3200+ (1989.85-MHz K8-class CPU)              
  Origin="AuthenticAMD"  Id=0x20ff2  Family=0xf  Model=0x2f  Stepping=2        
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>             
  AMD Features2=0x1<LAHF>
real memory  = 1073741824 (1024 MB)
avail memory = 929157120 (886 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HP-CPC AWRDACPI>
ioapic0 <Version 2.1> irqs 0-23 on motherboard                                 
Timecounter "TSC" frequency 1989850843 Hz quality 800                          
random: entropy device external interface                                      
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19          
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard                                  
acpi0: <HP-CPC AWRDACPI> on motherboard
acpi0: Overriding SCI from IRQ 9 to IRQ 21                                     
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0                             
Timecounter "i8254" frequency 1193182 Hz quality 0                             
Event timer "i8254" frequency 1193182 Hz quality 100                           
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0                      
atrtc0: registered as a time-of-day clock, resolution 1.000000s                
Event timer "RTC" frequency 32768 Hz quality 0                                 
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900                       
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0         
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: bec00000 vs c2d00000
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xefff mem 0xd8000000-0xdfffffff,0xfddf0000-0xfddfffff irq 17 at device 5.0 on pci1
vgapci0: Boot video device
atapci0: <ATI IXP400 SATA150 controller> port 0xfe00-0xfe07,0xfd00-0xfd03,0xfc00-0xfc07,0xfb00-0xfb03,0xfa00-0xfa0f mem 0xfe02f000-0xfe02f1ff irq 22 at device 18.0 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ohci0: <ATI SB400 USB Controller> mem 0xfe02e000-0xfe02efff irq 19 at device 19.0 on pci0
usbus0 on ohci0
ohci1: <ATI SB400 USB Controller> mem 0xfe02d000-0xfe02dfff irq 19 at device 19.1 on pci0
usbus1 on ohci1
ehci0: <ATI SB400 USB 2.0 controller> mem 0xfe02c000-0xfe02cfff irq 19 at device 19.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
atapci1: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf800-0xf80f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0xdf00-0xdf3f mem 0xfdcc0000-0xfdcdffff,0xfdca0000-0xfdcbffff irq 22 at device 2.0 on pci2
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/256, RX 1/256
rl0: <RealTek 8139 10/100BaseTX> port 0xde00-0xdeff mem 0xfdcff000-0xfdcff0ff irq 20 at device 3.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
pci2: <serial bus, FireWire> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 20.5 (no driver attached)
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd3fff,0xd4000-0xd4fff on isa0
powernow0: <Cool`n'Quiet K8> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI OHCI root HUB> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI EHCI root HUB> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST3000DM001-1CH166 CC27> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 2861588MB (5860533168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ada0p3 [rw]...
warning: total configured swap (922733 pages) exceeds maximum recommended amount (921968 pages).
warning: increase kern.maxswzone or reduce amount of swap.
uhub2: 8 ports with 8 removable, self powered
random: unblocking device.
ugen1.2: <vendor 0x058f USB Reader> at usbus1
umass0 on uhub1
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI device
da0: Serial Number xxxxxxxx
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus4 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI device
da1: Serial Number xxxxxxxx
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus4 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI device
da2: Serial Number xxxxxxxx
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus4 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI device
da3: Serial Number xxxxxxxx
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
rl0: link state changed to DOWN
em0: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled