Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-10 18:07:30
From: bob
Description: FreeBSD/amd64 on ASUS All Series
ada0: Previously was known as ad4
ada1 at ahcich5 bus 0 scbus3 target 0 lun 0
ada1: <Samsung SSD 850 PRO 256GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 244198MB (500118192 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad8
ada2 at ahcich6 bus 0 scbus4 target 0 lun 0
ada2: <Patriot Blaze S9FM01.9> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 114473MB (234441648 512 byte sectors)
ada2: Previously was known as ad10
ada3 at ahcich7 bus 0 scbus5 target 0 lun 0
ada3: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors)
ada3: Previously was known as ad12
ada4 at ahcich8 bus 0 scbus6 target 0 lun 0
ada4: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 476940MB (976773168 512 byte sectors)
ada4: Previously was known as ad14
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus7 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NSB0 LN01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1650030820 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen2.2: <SMSC USB5537B> at usbus2
uhub4: <SMSC USB5537B, class 9/0, rev 3.00/60.80, addr 1> on usbus2
uhub3: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
ugen0.2: <CPS CP 1350C> at usbus0
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub6: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub4: 7 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <ASUS TEK. ASM107x> at usbus0
uhub7: <ASUS TEK. ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus0
uhub7: MTT enabled
ugen2.3: <SMSC USB2137B> at usbus2
uhub8: <SMSC USB2137B, class 9/0, rev 2.10/60.80, addr 2> on usbus2
uhub8: MTT enabled
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub9: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.a0, addr 3> on usbus0
uhub8: 7 ports with 4 removable, self powered
uhub9: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
kbd2 at ukbd0
ugen0.6: <Metadot - Das Keyboard Das Keyboard> at usbus0
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
ugen0.7: <ASUS TEK. ASM107x> at usbus0
uhub10: <ASUS TEK. ASM107x, class 9/0, rev 3.00/0.01, addr 6> on usbus0
Root mount waiting for: usbus0
uhub10: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub11: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/d.a1, addr 7> on usbus0
Root mount waiting for: usbus0
uhub11: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ada1p2 [rw]...
uhid0: <Microchip Technology Inc. U2717D0B2A15091601, class 0/0, rev 2.00/0.02, addr 3> on usbus2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
uhid2: <System Control> on usbus0
em0: link state changed to UP
nvidia-modeset: Allocated GPU:0 (GPU-bd5ae7b9-7482-837e-c754-c9129eade0f3) @ PCI:0000:01:00.0
ugen2.3: <SMSC USB2137B> at usbus2 (disconnected)
uhub8: at uhub2, port 4, addr 2 (disconnected)
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2 (disconnected)
uhid0: at uhub8, port 5, addr 3 (disconnected)
ugen2.2: <SMSC USB5537B> at usbus2 (disconnected)
uhub4: at uhub2, port 2, addr 1 (disconnected)
ugen2.2: <SMSC USB5537B> at usbus2
uhub4: <SMSC USB5537B, class 9/0, rev 3.00/60.80, addr 1> on usbus2
uhub4: 7 ports with 4 removable, self powered
ugen2.3: <SMSC USB2137B> at usbus2
uhub8: <SMSC USB2137B, class 9/0, rev 2.10/60.80, addr 2> on usbus2
uhub8: MTT enabled
uhub8: 7 ports with 4 removable, self powered
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2
uhid0: <Microchip Technology Inc. U2717D0B2A15091601, class 0/0, rev 2.00/0.02, addr 3> on usbus2
Limiting closed port RST response from 251 to 200 packets/sec
Limiting closed port RST response from 570 to 200 packets/sec
Limiting closed port RST response from 291 to 200 packets/sec
Limiting closed port RST response from 341 to 200 packets/sec
Limiting closed port RST response from 352 to 200 packets/sec
ugen2.3: <SMSC USB2137B> at usbus2 (disconnected)
uhub8: at uhub2, port 4, addr 2 (disconnected)
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2 (disconnected)
uhid0: at uhub8, port 5, addr 3 (disconnected)
ugen2.2: <SMSC USB5537B> at usbus2 (disconnected)
uhub4: at uhub2, port 2, addr 1 (disconnected)
ugen2.2: <SMSC USB5537B> at usbus2
uhub4: <SMSC USB5537B, class 9/0, rev 3.00/60.80, addr 1> on usbus2
uhub4: 7 ports with 4 removable, self powered
ugen2.3: <SMSC USB2137B> at usbus2
uhub8: <SMSC USB2137B, class 9/0, rev 2.10/60.80, addr 2> on usbus2
uhub8: MTT enabled
uhub8: 7 ports with 4 removable, self powered
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2
uhid0: <Microchip Technology Inc. U2717D0B2A15091601, class 0/0, rev 2.00/0.02, addr 3> on usbus2
ugen0.9: <Western Digital My Book 25EE> at usbus0
umass0: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 8> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc001
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 7630885MB (15628052480 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device
ses2: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ses2: 400.000MB/s transfers
ses2: SCSI-3 ENC Device
(da0:umass-sim0:0:0:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 27 c1 00 00 00 04 00 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
(da0:umass-sim0:0:0:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 27 c1 00 00 00 04 00 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
nvidia-modeset: Freed GPU:0 (GPU-bd5ae7b9-7482-837e-c754-c9129eade0f3) @ PCI:0000:01:00.0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 7d9h20m12s
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-STABLE #10 r336303: Sun Jul 15 08:06:39 CDT 2018
    [_EMAIL_XXXXXXXXXX]:/usr/obj/usr/src/sys/LUKE amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (3300.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33191178240 (31653 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID:  8
 cpu9 (AP): APIC ID:  9
 cpu10 (AP): APIC ID: 10
 cpu11 (AP): APIC ID: 11
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.67  Thu May 31 22:52:15 PDT 2018
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pci255: <dasp, performance counters> at device 11.1 (no driver attached)
pci255: <dasp, performance counters> at device 11.2 (no driver attached)
pci255: <dasp, performance counters> at device 16.1 (no driver attached)
pci255: <dasp, performance counters> at device 16.6 (no driver attached)
pci255: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_syscontainer2: <System Container> on acpi0
acpi_syscontainer3: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci5: <ACPI PCI bus> on pcib3
ahci0: <AHCI SATA controller> mem 0xfb210000-0xfb211fff irq 27 at device 0.0 on pci5
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pci0: <unknown> at device 1.2 (no driver attached)
pci0: <unknown> at device 1.3 (no driver attached)
pci0: <unknown> at device 1.4 (no driver attached)
pci0: <unknown> at device 1.5 (no driver attached)
pci0: <unknown> at device 1.6 (no driver attached)
pci0: <unknown> at device 1.7 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.2 on pci0
pci2: <ACPI PCI bus> on pcib5
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 2.5 (no driver attached)
pci0: <unknown> at device 2.6 (no driver attached)
pci0: <unknown> at device 2.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 on pci1
nvidia0: <GeForce GTX 960> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 on pci1
pci0: <unknown> at device 17.0 (no driver attached)
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf040-0xf05f mem 0xfb33d000-0xfb33d7ff irq 16 at device 17.4 on pci0
ahci1: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 3 on ahci1
ahciem0: <AHCI enclosure management bridge> on ahci1
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb320000-0xfb32ffff irq 23 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf020-0xf03f mem 0xfb300000-0xfb31ffff,0xfb339000-0xfb339fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb338000-0xfb3383ff irq 18 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb330000-0xfb333fff irq 22 at device 27.0 on pci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib8
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 16 at device 0.0 on pci7
xhci1: 32 bytes context size, 64-bit DMA
usbus2 on xhci1
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb337000-0xfb3373ff irq 21 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci2: <Intel Wellsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf000-0xf01f mem 0xfb336000-0xfb3367ff irq 17 at device 31.2 on pci0
ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich5: <AHCI channel> at channel 0 on ahci2
ahcich6: <AHCI channel> at channel 1 on ahci2
ahcich7: <AHCI channel> at channel 2 on ahci2
ahcich8: <AHCI channel> at channel 3 on ahci2
ahciem1: <AHCI enclosure management bridge> on ahci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm5: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC1150 (Internal Digital)> at nid 17 on hdaa1
pcm7: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <0x1b21 XHCI root HUB> at usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZHPU256HCGL-00004 UXM6501Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: Previously was known as ad4
ada1 at ahcich5 bus 0 scbus3 target 0 lun 0
ada1: <Samsung SSD 850 PRO 256GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 244198MB (500118192 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad8
ada2 at ahcich6 bus 0 scbus4 target 0 lun 0
ada2: <Patriot Blaze S9FM01.9> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 114473MB (234441648 512 byte sectors)
ada2: Previously was known as ad10
ada3 at ahcich7 bus 0 scbus5 target 0 lun 0
ada3: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors)
ada3: Previously was known as ad12
ada4 at ahcich8 bus 0 scbus6 target 0 lun 0
ada4: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 476940MB (976773168 512 byte sectors)
ada4: Previously was known as ad14
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus7 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NSB0 LN01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1650036072 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen2.2: <SMSC USB5537B> at usbus2
uhub4: <SMSC USB5537B, class 9/0, rev 3.00/60.80, addr 1> on usbus2
uhub3: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
ugen0.2: <CPS CP 1350C> at usbus0
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub6: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub4: 7 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <ASUS TEK. ASM107x> at usbus0
uhub7: <ASUS TEK. ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus0
uhub7: MTT enabled
ugen2.3: <SMSC USB2137B> at usbus2
uhub8: <SMSC USB2137B, class 9/0, rev 2.10/60.80, addr 2> on usbus2
uhub8: MTT enabled
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub9: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.a0, addr 3> on usbus0
uhub8: 7 ports with 4 removable, self powered
uhub9: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
kbd2 at ukbd0
ugen0.6: <Metadot - Das Keyboard Das Keyboard> at usbus0
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.7: <Western Digital My Book 25EE> at usbus0
umass0: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 6> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8000
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 7630885MB (15628052480 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device
ses2: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ses2: 400.000MB/s transfers
ses2: SCSI-3 ENC Device
ugen0.8: <ASUS TEK. ASM107x> at usbus0
uhub10: <ASUS TEK. ASM107x, class 9/0, rev 3.00/0.01, addr 7> on usbus0
Root mount waiting for: usbus0
uhub10: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.9: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub11: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/d.a1, addr 8> on usbus0
Root mount waiting for: usbus0
uhub11: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ada1p2 [rw]...
uhid0: <Microchip Technology Inc. U2717D0B2A15091601, class 0/0, rev 2.00/0.02, addr 3> on usbus2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
uhid2: <System Control> on usbus0
em0: link state changed to UP
nvidia-modeset: Allocated GPU:0 (GPU-bd5ae7b9-7482-837e-c754-c9129eade0f3) @ PCI:0000:01:00.0
ugen0.7: <Western Digital My Book 25EE> at usbus0 (disconnected)
umass0: at uhub0, port 18, addr 6 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 25EE 4004> s/n 374A4B554C565543 detached
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 4004> s/n 374A4B554C565543 detached
(ses2:umass-sim0:0:(da0:0:umass-sim0:0:1): 0:Periph destroyed
0): Periph destroyed
Limiting closed port RST response from 308 to 200 packets/sec
em0: link state changed to DOWN
em0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
Limiting closed port RST response from 216 to 200 packets/sec
nvidia-modeset: Freed GPU:0 (GPU-bd5ae7b9-7482-837e-c754-c9129eade0f3) @ PCI:0000:01:00.0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 1 0 1 1 1 0 1 0 0 0 1 1 0 0 
pid 1625 (firefox), uid 5555: exited on signal 11 (core dumped)
1 1 1 1 1 0 0 0 0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Uptime: 26d14h56m9s
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-STABLE #10 r336303: Sun Jul 15 08:06:39 CDT 2018
    [_EMAIL_XXXXXXXXXX]:/usr/obj/usr/src/sys/LUKE amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (3300.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33191178240 (31653 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID:  8
 cpu9 (AP): APIC ID:  9
 cpu10 (AP): APIC ID: 10
 cpu11 (AP): APIC ID: 11
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.67  Thu May 31 22:52:15 PDT 2018
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pci255: <dasp, performance counters> at device 11.1 (no driver attached)
pci255: <dasp, performance counters> at device 11.2 (no driver attached)
pci255: <dasp, performance counters> at device 16.1 (no driver attached)
pci255: <dasp, performance counters> at device 16.6 (no driver attached)
pci255: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_syscontainer2: <System Container> on acpi0
acpi_syscontainer3: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci5: <ACPI PCI bus> on pcib3
ahci0: <AHCI SATA controller> mem 0xfb210000-0xfb211fff irq 27 at device 0.0 on pci5
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pci0: <unknown> at device 1.2 (no driver attached)
pci0: <unknown> at device 1.3 (no driver attached)
pci0: <unknown> at device 1.4 (no driver attached)
pci0: <unknown> at device 1.5 (no driver attached)
pci0: <unknown> at device 1.6 (no driver attached)
pci0: <unknown> at device 1.7 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.2 on pci0
pci2: <ACPI PCI bus> on pcib5
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 2.5 (no driver attached)
pci0: <unknown> at device 2.6 (no driver attached)
pci0: <unknown> at device 2.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 on pci1
nvidia0: <GeForce GTX 960> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 on pci1
pci0: <unknown> at device 17.0 (no driver attached)
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf040-0xf05f mem 0xfb33d000-0xfb33d7ff irq 16 at device 17.4 on pci0
ahci1: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 3 on ahci1
ahciem0: <AHCI enclosure management bridge> on ahci1
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb320000-0xfb32ffff irq 23 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf020-0xf03f mem 0xfb300000-0xfb31ffff,0xfb339000-0xfb339fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb338000-0xfb3383ff irq 18 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb330000-0xfb333fff irq 22 at device 27.0 on pci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib8
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 16 at device 0.0 on pci7
xhci1: 32 bytes context size, 64-bit DMA
usbus2 on xhci1
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb337000-0xfb3373ff irq 21 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci2: <Intel Wellsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf000-0xf01f mem 0xfb336000-0xfb3367ff irq 17 at device 31.2 on pci0
ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich5: <AHCI channel> at channel 0 on ahci2
ahcich6: <AHCI channel> at channel 1 on ahci2
ahcich7: <AHCI channel> at channel 2 on ahci2
ahcich8: <AHCI channel> at channel 3 on ahci2
ahciem1: <AHCI enclosure management bridge> on ahci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm5: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC1150 (Internal Digital)> at nid 17 on hdaa1
pcm7: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <0x1b21 XHCI root HUB> at usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZHPU256HCGL-00004 UXM6501Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: Previously was known as ad4
ada1 at ahcich5 bus 0 scbus3 target 0 lun 0
ada1: <Samsung SSD 850 PRO 256GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 244198MB (500118192 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad8
ada2 at ahcich6 bus 0 scbus4 target 0 lun 0
ada2: <Patriot Blaze S9FM01.9> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 114473MB (234441648 512 byte sectors)
ada2: Previously was known as ad10
ada3 at ahcich7 bus 0 scbus5 target 0 lun 0
ada3: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors)
ada3: Previously was known as ad12
ada4 at ahcich8 bus 0 scbus6 target 0 lun 0
ada4: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 476940MB (976773168 512 byte sectors)
ada4: Previously was known as ad14
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus7 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NSB0 LN01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1650032486 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
ugen2.2: <SMSC USB5537B> at usbus2
uhub4: <SMSC USB5537B, class 9/0, rev 3.00/60.80, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
ugen0.2: <CPS CP 1350C> at usbus0
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub6: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub4: 7 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <ASUS TEK. ASM107x> at usbus0
uhub7: <ASUS TEK. ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus0
uhub7: MTT enabled
ugen2.3: <SMSC USB2137B> at usbus2
uhub8: <SMSC USB2137B, class 9/0, rev 2.10/60.80, addr 2> on usbus2
uhub8: MTT enabled
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub9: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.a0, addr 3> on usbus0
uhub8: 7 ports with 4 removable, self powered
uhub9: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
kbd2 at ukbd0
ugen0.6: <Metadot - Das Keyboard Das Keyboard> at usbus0
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
ugen0.7: <ASUS TEK. ASM107x> at usbus0
uhub10: <ASUS TEK. ASM107x, class 9/0, rev 3.00/0.01, addr 6> on usbus0
Root mount waiting for: usbus0
uhub10: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub11: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/d.a1, addr 7> on usbus0
Root mount waiting for: usbus0
uhub11: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ada1p2 [rw]...
uhid0: <Microchip Technology Inc. U2717D0B2A15091601, class 0/0, rev 2.00/0.02, addr 3> on usbus2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
uhid2: <System Control> on usbus0
em0: link state changed to UP
nvidia-modeset: Allocated GPU:0 (GPU-bd5ae7b9-7482-837e-c754-c9129eade0f3) @ PCI:0000:01:00.0
pid 1084 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1092 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1110 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1111 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1097 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1121 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1125 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1132 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1133 (firefox), uid 5555: exited on signal 11 (core dumped)
pid 1134 (firefox), uid 5555: exited on signal 11 (core dumped)
ugen0.9: <Western Digital My Book 1235> at usbus0
umass0: <Western Digital My Book 1235, class 0/0, rev 3.00/10.05, addr 8> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc001
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 1235 1005> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 3815415MB (7813969920 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 1005> Fixed Enclosure Services SPC-4 SCSI device
ses2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
ses2: 400.000MB/s transfers
ses2: SCSI-3 ENC Device
ugen0.9: <Western Digital My Book 1235> at usbus0 (disconnected)
umass0: at uhub0, port 19, addr 8 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 1235 1005> s/n 574343344530595353363550 detached
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 1005> s/n 574343344530595353363550 detached
(ses2:umass-sim0:0:0:1): Periph destroyed
(da0:umass-sim0:0:0:0): Periph destroyed
ugen0.9: <Western Digital My Book 25EE> at usbus0
umass0: <Western Digital My Book 25EE, class 0/0, rev 3.00/40.04, addr 9> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc001
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 25EE 4004> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 7630885MB (15628052480 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 4004> Fixed Enclosure Services SPC-4 SCSI device
ses2: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ses2: 400.000MB/s transfers
ses2: SCSI-3 ENC Device
(da0:umass-sim0:0:0:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 27 c1 00 00 00 04 00 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
(da0:umass-sim0:0:0:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 27 c1 00 00 00 04 00 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
ugen0.9: <Western Digital My Book 25EE> at usbus0 (disconnected)
umass0: at uhub0, port 19, addr 9 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 25EE 4004> s/n 374A4B554C565543 detached
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 4004> s/n 374A4B554C565543 detached
(ses2:umass-sim0:0:0:1): Periph destroyed
(da0:umass-sim0:0:0:0): Periph destroyed
ugen0.9: <Western Digital My Book 1230> at usbus0
umass0: <Western Digital My Book 1230, class 0/0, rev 3.00/10.50, addr 10> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc001
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 1230 1050> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 3815415MB (976746240 4096 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 1050> Fixed Enclosure Services SPC-4 SCSI device
ses2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
ses2: 400.000MB/s transfers
ses2: SCSI-3 ENC Device
ugen0.9: <Western Digital My Book 1230> at usbus0 (disconnected)
umass0: at uhub0, port 19, addr 10 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 1230 1050> s/n 574343344531303136383435 detached
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 1050> s/n 574343344531303136383435 detached
(ses2:umass-sim0:0:0:1): Periph destroyed
(da0:umass-sim0:0:0:0): Periph destroyed
ugen0.9: <SanDisk Cruzer> at usbus0
umass0: <SanDisk Cruzer, class 0/0, rev 2.00/1.27, addr 11> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <SanDisk Cruzer 1.27> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 14803MB (30316544 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
GEOM: da0: the primary GPT table is corrupt or invalid.
GEOM: da0: using the secondary instead -- recovery strongly advised.
GEOM: iso9660/CPBA_X64FRE_EN-US_DV5: the primary GPT table is corrupt or invalid.
GEOM: iso9660/CPBA_X64FRE_EN-US_DV5: using the secondary instead -- recovery strongly advised.
GEOM: diskid/DISK-4C530001230821121555: the primary GPT table is corrupt or invalid.
GEOM: diskid/DISK-4C530001230821121555: using the secondary instead -- recovery strongly advised.
ugen0.9: <SanDisk Cruzer> at usbus0 (disconnected)
umass0: at uhub0, port 3, addr 11 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <SanDisk Cruzer 1.27> s/n 4C530001230821121555 detached
(da0:umass-sim0:0:0:0): Periph destroyed
Limiting closed port RST response from 205 to 200 packets/sec
ugen0.9: <Western Digital My Book 1230> at usbus0
umass0: <Western Digital My Book 1230, class 0/0, rev 3.00/10.50, addr 12> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc001
umass0:8:0:-1: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 1230 1050> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 3815415MB (976746240 4096 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 1050> Fixed Enclosure Services SPC-4 SCSI device
ses2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
ses2: 400.000MB/s transfers
ses2: SCSI-3 ENC Device
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 00 01 10 00 00 02 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 05 39 06 32 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:4,1 (Logical unit is in process of becoming ready)
(da0:umass-sim0:0:0:0): Polling device for readiness
ugen0.9: <Western Digital My Book 1230> at usbus0 (disconnected)
umass0: at uhub0, port 19, addr 12 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <WD My Book 1230 1050> s/n 574343344531303136383435 detached
ses2 at umass-sim0 bus 0 scbus8 target 0 lun 1
ses2: <WD SES Device 1050> s/n 574343344531303136383435 detached
(ses2:umass-sim0:0:0:1): Periph destroyed
(da0:umass-sim0:0:0:0): Periph destroyed
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
ugen0.6: <Metadot - Das Keyboard Das Keyboard> at usbus0 (disconnected)
ukbd1: at uhub9, port 4, addr 5 (disconnected)
uhid2: at uhub9, port 4, addr 5 (disconnected)
ugen0.6: <Metadot - Das Keyboard Das Keyboard> at usbus0
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
uhid2: <System Control> on usbus0
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: is alive again
newnfs server vader:/stor/home: not responding
newnfs server vader:/stor/home: is alive again
nvidia-modeset: Freed GPU:0 (GPU-bd5ae7b9-7482-837e-c754-c9129eade0f3) @ PCI:0000:01:00.0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 2 2 1 2 1 1 0 0 0 0 0 done
All buffers synced.
newnfs server vader:/stor/Media: not responding
Uptime: 40d0h3m43s
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-STABLE #10 r336303: Sun Jul 15 08:06:39 CDT 2018
    [_EMAIL_XXXXXXXXXX]:/usr/obj/usr/src/sys/LUKE amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (3300.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306f2  Family=0x6  Model=0x3f  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33191178240 (31653 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
 cpu8 (AP): APIC ID:  8
 cpu9 (AP): APIC ID:  9
 cpu10 (AP): APIC ID: 10
 cpu11 (AP): APIC ID: 11
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.67  Thu May 31 22:52:15 PDT 2018
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pci255: <dasp, performance counters> at device 11.1 (no driver attached)
pci255: <dasp, performance counters> at device 11.2 (no driver attached)
pci255: <dasp, performance counters> at device 16.1 (no driver attached)
pci255: <dasp, performance counters> at device 16.6 (no driver attached)
pci255: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_syscontainer2: <System Container> on acpi0
acpi_syscontainer3: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci5: <ACPI PCI bus> on pcib3
ahci0: <AHCI SATA controller> mem 0xfb210000-0xfb211fff irq 27 at device 0.0 on pci5
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pci0: <unknown> at device 1.2 (no driver attached)
pci0: <unknown> at device 1.3 (no driver attached)
pci0: <unknown> at device 1.4 (no driver attached)
pci0: <unknown> at device 1.5 (no driver attached)
pci0: <unknown> at device 1.6 (no driver attached)
pci0: <unknown> at device 1.7 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.2 on pci0
pci2: <ACPI PCI bus> on pcib5
pci0: <unknown> at device 2.4 (no driver attached)
pci0: <unknown> at device 2.5 (no driver attached)
pci0: <unknown> at device 2.6 (no driver attached)
pci0: <unknown> at device 2.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 on pci1
nvidia0: <GeForce GTX 960> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fba) HDA Controller> mem 0xfb080000-0xfb083fff irq 44 at device 0.1 on pci1
pci0: <unknown> at device 17.0 (no driver attached)
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf040-0xf05f mem 0xfb33d000-0xfb33d7ff irq 16 at device 17.4 on pci0
ahci1: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 3 on ahci1
ahciem0: <AHCI enclosure management bridge> on ahci1
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb320000-0xfb32ffff irq 23 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf020-0xf03f mem 0xfb300000-0xfb31ffff,0xfb339000-0xfb339fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb338000-0xfb3383ff irq 18 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Wellsburg HDA Controller> mem 0xfb330000-0xfb333fff irq 22 at device 27.0 on pci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib8
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 16 at device 0.0 on pci7
xhci1: 32 bytes context size, 64-bit DMA
usbus2 on xhci1
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb337000-0xfb3373ff irq 21 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci2: <Intel Wellsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf000-0xf01f mem 0xfb336000-0xfb3367ff irq 17 at device 31.2 on pci0
ahci2: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich5: <AHCI channel> at channel 0 on ahci2
ahcich6: <AHCI channel> at channel 1 on ahci2
ahcich7: <AHCI channel> at channel 2 on ahci2
ahcich8: <AHCI channel> at channel 3 on ahci2
ahciem1: <AHCI enclosure management bridge> on ahci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0072) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0072) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0072) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC1150 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm5: <Realtek ALC1150 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC1150 (Internal Digital)> at nid 17 on hdaa1
pcm7: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <0x1b21 XHCI root HUB> at usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZHPU256HCGL-00004 UXM6501Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: Previously was known as ad4
ada1 at ahcich5 bus 0 scbus3 target 0 lun 0
ada1: <Samsung SSD 850 PRO 256GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 244198MB (500118192 512 byte sectors)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad8
ada2 at ahcich6 bus 0 scbus4 target 0 lun 0
ada2: <Patriot Blaze S9FM01.9> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 114473MB (234441648 512 byte sectors)
ada2: Previously was known as ad10
ada3 at ahcich7 bus 0 scbus5 target 0 lun 0
ada3: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors)
ada3: Previously was known as ad12
ada4 at ahcich8 bus 0 scbus6 target 0 lun 0
ada4: <MD500GBVS 04.06A00> ATA8-ACS SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 476940MB (976773168 512 byte sectors)
ada4: Previously was known as ad14
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus7 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NSB0 LN01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1650031694 Hz quality 1000
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
ugen2.2: <SMSC USB5537B> at usbus2
uhub4: <SMSC USB5537B, class 9/0, rev 3.00/60.80, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
ugen0.2: <CPS CP 1350C> at usbus0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
uhub4: 7 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
ugen0.3: <ASUS TEK. ASM107x> at usbus0
uhub7: <ASUS TEK. ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus0
uhub7: MTT enabled
ugen2.3: <SMSC USB2137B> at usbus2
uhub8: <SMSC USB2137B, class 9/0, rev 2.10/60.80, addr 2> on usbus2
uhub8: MTT enabled
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub9: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/d.a0, addr 3> on usbus0
uhub8: 7 ports with 4 removable, self powered
uhub9: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus0
ugen2.4: <Microchip Technology Inc. U2717D0B2A15091601> at usbus2
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.6: <Metadot - Das Keyboard Das Keyboard> at usbus0
ukbd1: <Keyboard> on usbus0
kbd3 at ukbd1
ugen0.7: <ASUS TEK. ASM107x> at usbus0
uhub10: <ASUS TEK. ASM107x, class 9/0, rev 3.00/0.01, addr 6> on usbus0
Root mount waiting for: usbus0
uhub10: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub11: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/d.a1, addr 7> on usbus0
Root mount waiting for: usbus0
uhub11: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ada1p2 [rw]...
uhid0: <Microchip Technology Inc. U2717D0B2A15091601, class 0/0, rev 2.00/0.02, addr 3> on usbus2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 4> on usbus0
uhid2: <System Control> on usbus0
em0: link state changed to UP