Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-12 07:43:48
From: Anton Shterenlikht
Description: Lenovo ThinkPad T61p
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-ALPHA9 r339271 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (2493.81-MHz K8-class CPU) Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> AMD Features=0x20000800<SYSCALL,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4022919168 (3836 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <LENOVO TP-7L > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20181003/tbfadt-748) Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20181003/tbfadt-796) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810e2e60, 0) error 19 kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO TP-7L> on motherboard CPU0: local APIC error 0x40 CPU1: local APIC error 0x40 acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd6000000-0xd6ffffff,0xe0000000-0xefffffff,0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device em0: <Intel(R) PRO/1000 Network Connection> port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801H HDA Controller> mem 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pcib2: [GIANT-LOCKED] pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pcib3: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib3 iwn0: <Intel Wireless WiFi Link 4965> mem 0xdf2fe000-0xdf2fffff irq 17 at device 0.0 on pci2 pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 pcib4: [GIANT-LOCKED] pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 pcib5: [GIANT-LOCKED] pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0 pcib6: [GIANT-LOCKED] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 usbus3 on uhci2 usbus3: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 usbus6: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib7 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci3 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci3: <serial bus, FireWire> at device 0.1 (no driver attached) sdhci_pci0: <RICOH R5C822 SD> mem 0xf8101800-0xf81018ff irq 18 at device 0.2 on pci3 sdhci_pci0: 1 slot(s) allocated isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ICH8M AHCI SATA controller> port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROMs> at iomem 0xcf800-0xd07ff,0xd0800-0xd17ff,0xe0000-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac0 hdaa0: <Analog Devices AD1984 Audio Function Group> at nid 1 on hdacc0 pcm0: <Analog Devices AD1984 (Analog 2.0+HP/2.0)> at nid 18,17 and 28,20,21 on hdaa0 pcm1: <Analog Devices AD1984 (Ext-Rear Digital)> at nid 27 on hdaa0 hdacc1: <Conexant (0x2bfa) HDA CODEC> at cad 1 on hdac0 unknown: <Conexant (0x2bfa) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) ugen6.1: <Intel EHCI root HUB> at usbus6 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel UHCI root HUB> at usbus4 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <HITACHI HTS723232A7A364 EC2ZB70B> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 305245MB (625142448 512 byte sectors) cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GSA-U10N 1.05> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ada0p2 [rw]... uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub0: 6 ports with 6 removable, self powered lo0: link state changed to UP ugen6.2: <vendor 0x162f product 0x4003> at usbus6 ugen0.2: <Broadcom Corp BCM2045B> at usbus0 em0: link state changed to UP ubt0 on uhub1 ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize()