Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-13 05:44:25
From: Ross
Description: Gigabyte 990FXA-UD3, AMD8350
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #31 r339216M: Sat Oct 6 18:29:11 MDT 2018
[_EMAIL_XXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC-NODEBUG amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: AMD FX(tm)-8350 Eight-Core Processor (4018.31-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33329463296 (31785 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 1 4 5 7 6 3 2
Timecounter "TSC-low" frequency 2009152756 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112aa30, 0) error 19
kbd1 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xfea20000-0xfea3ffff irq 24 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV910 HDA Controller> mem 0xfea40000-0xfea43fff irq 25 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe900fff irq 48 at device 0.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xfe810000-0xfe8101ff irq 47 at device 0.0 on pci3
ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection> port 0xc000-0xc01f mem 0xfe7c0000-0xfe7dffff,0xfe700000-0xfe77ffff,0xfe7e0000-0xfe7e3fff irq 32 at device 0.0 on pci4
em0: attach_pre capping queues at 2
Current cap: 0x460b
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 2
em0: pxm cpus: 8 queue msgs: 4 admincnt: 1
em0: using 2 rx queues 2 tx queues
em0: Using MSIX interrupts with 3 vectors
em0: allocated for 2 tx_queues
em0: allocated for 2 rx_queues
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 2/1024, RX 2/1024
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 18 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci6: <ACPI PCI bus> on pcib6
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xfe600000-0xfe600fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci6
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
usbus6: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
usbus7: 480Mbps High Speed USB v2.0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC889 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC889 (Onboard Digital)> at nid 17 on hdaa1
pcm4: <Realtek ALC889 (Rear Digital)> at nid 30 on hdaa1
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen4.1: <ATI EHCI root HUB> at usbus4
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen7.1: <ATI EHCI root HUB> at usbus7
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen6.1: <ATI OHCI root HUB> at usbus6
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD2003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD2003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
ada2: <WDC WD2003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich6 bus 0 scbus6 target 0 lun 0
ada3: <INTEL SSDSC2BW120A4 DC22> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 114473MB (234441648 512 byte sectors)
ada3: quirks=0x1<4K>
Trying to mount root from zfs:aub1/ROOT/default []...
uhub3: 2 ports with 2 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub6: 5 ports with 4 removable, self powered
Root mount waiting for: usbus7 usbus4 usbus2 usbus0
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub8 on uhub6
uhub8: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
Root mount waiting for: usbus7 usbus4 usbus2 usbus0
uhub8: 4 ports with 4 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
ugen1.2: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)> at usbus1
ugen1.3: <Unicomp Endura Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <HID Keyboard> on usbus1
kbd2 at ukbd0
anon_inodefs_init:
[drm] radeon kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x047B 0x00).
[drm] register mmio base: 0xFEA20000
[drm] register mmio size: 131072
[drm:radeon_device_init] Unable to find PCI I/O BAR
[drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO
ATOM BIOS: 6779.13.12.0.41.AS09
drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 16737554 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
radeon/CAICOS_pfp.bin: could not load firmware image, error 2
radeon/CAICOS_pfp.bin: could not load firmware image, error 2
radeon/CAICOS_me.bin: could not load firmware image, error 2
radeon/CAICOS_me.bin: could not load firmware image, error 2
radeon/BTC_rlc.bin: could not load firmware image, error 2
radeon/BTC_rlc.bin: could not load firmware image, error 2
radeon/CAICOS_mc.bin: could not load firmware image, error 2
radeon/CAICOS_mc.bin: could not load firmware image, error 2
radeon/CAICOS_smc.bin: could not load firmware image, error 2
radeon/CAICOS_smc.bin: could not load firmware image, error 2
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
radeon/SUMO_uvd.bin: could not load firmware image, error 2
radeon/SUMO_uvd.bin: could not load firmware image, error 2
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
drmn0: WB enabled
drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff805007d9c00
drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff805007d9c0c
drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800c0072118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 4 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] hw_i2c forced on, you may experience display detection problems!
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] Connector VGA-1: get mode from tunables:
[drm] - kern.vt.fb.modes.VGA-1
[drm] - kern.vt.fb.default_mode
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0363000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xc0363000 vbase=0xfffff800c0363000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for drmn0 on minor 0
vxlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
re0: link state changed to DOWN
vxlan0: link state changed to UP
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
re0: link state changed to UP
ums0 on uhub1
ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
Link state changed to up
em0: link state changed to UP
ugen1.3: <Unicomp Endura Keyboard> at usbus1 (disconnected)
ukbd0: at uhub1, port 4, addr 3 (disconnected)
ukbd0: detached
ugen1.2: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)> at usbus1 (disconnected)
ums0: at uhub1, port 3, addr 2 (disconnected)
ums0: detached
pid 77274 (conftest), uid 65534: exited on signal 10 (core dumped)
pid 77281 (conftest), uid 65534: exited on signal 10 (core dumped)
ugen2.2: <JMicron USB to ATA/ATAPI bridge> at usbus2
umass0 on uhub0
umass0: <Storage> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:8:0: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <INTEL SS DSA2M040G2GC 2CV1> Fixed Direct Access SCSI-2 device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 38166MB (78165360 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.2: <JMicron USB to ATA/ATAPI bridge> at usbus2 (disconnected)
umass0: at uhub0, port 4, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <INTEL SS DSA2M040G2GC 2CV1> s/n C61B006601C3 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
ugen1.2: <Prolific Technology Inc. USB-Serial Controller> at usbus1
uplcom0 on uhub1
uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 2> on usbus1
ugen1.2: <Prolific Technology Inc. USB-Serial Controller> at usbus1 (disconnected)
uplcom0: at uhub1, port 4, addr 2 (disconnected)
uplcom0: detached
ugen2.2: <Generic USB2.0-CRW> at usbus2
umass0 on uhub0
umass0: <Bulk-In, Bulk-Out, Interface> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:8:0: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 15193MB (31116288 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.2: <Generic USB2.0-CRW> at usbus2 (disconnected)
umass0: at uhub0, port 3, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <Generic- Multi-Card 1.00> s/n 20060413092100000 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached