Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-13 11:50:12
From: Olli
Description: FreeBSD/amd64 workstation, AMD Phenom-II X6, SCSI Scanner, MO drive etc.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE-20180916 #0: Sun Sep 16 17:34:33 CEST 2018
    [_EMAIL_XXXXXXXXXXXXXX]:/home/obj/usr/src/sys/HEXAGON amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): text 80x25
CPU: AMD Phenom(tm) II X6 1055T Processor (2812.55-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100fa0  Family=0x10  Model=0xa  Stepping=0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=64
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16600449024 (15831 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <033110 APIC1021>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1406275188 Hz quality 800
Cuse v0.1.35 @ /dev/cuse
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ace500, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <033110 XSDT1021> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xce000000-0xcfffffff irq 18 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fb8) HDA Controller> mem 0xfe77c000-0xfe77ffff irq 19 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <serial bus, FireWire> at device 0.0 (no driver attached)
atapci0: <VIA ATA controller> port 0xbc00-0xbc07,0xb480-0xb483,0xb400-0xb407,0xb080-0xb083,0xb000-0xb00f irq 17 at device 0.1 on pci2
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe9fe000-0xfe9fffff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x9000-0x9007,0x8000-0x8003,0x7000-0x7007,0x6000-0x6003,0x5000-0x500f mem 0xfcfffc00-0xfcffffff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffe000-0xfcffefff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff800-0xfcfff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffd000-0xfcffdfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff400-0xfcfff4ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfcff4000-0xfcff7fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
sym0: <810> port 0xd000-0xd0ff mem 0xfeaffc00-0xfeaffcff irq 21 at device 6.0 on pci4
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym1: <810a> port 0xc000-0xc0ff mem 0xfeaff800-0xfeaff8ff irq 22 at device 7.0 on pci4
sym1: No NVRAM, ID 7, Fast-10, SE, parity checking
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcffc000-0xfcffcfff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci6: <ACPI PCI bus> on pcib6
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbfff000-0xfbffffff,0xfbff8000-0xfbffbfff irq 17 at device 0.0 on pci6
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfcff3000-0xfcff3fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
usbus6: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfcfff000-0xfcfff0ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
usbus7: 480Mbps High Speed USB v2.0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
aibs0: v0: 0x06020000        Vcore Voltage   850 /  1600
aibs0: v1: 0x06020001         +3.3 Voltage  2970 /  3630
aibs0: v2: 0x06020002           +5 Voltage  4500 /  5500
aibs0: v3: 0x06020003          +12 Voltage 10200 / 13800
aibs0: t0: 0x06030000      CPU Temperature   600 /   950
aibs0: t1: 0x06030001       MB Temperature   450 /   750
aibs0: f0: 0x06040000        CPU FAN Speed   600 /  7200
aibs0: f1: 0x06040001    CHASSIS FAN Speed   600 /  7200
aibs0: f2: 0x06040002      POWER FAN Speed   600 /  7200
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 3.333 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
hdacc0: <NVIDIA (0x0081) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0081) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm3: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm4: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm5: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
ugen0.1: <0x1033 XHCI root HUB> at usbus0
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen7.1: <ATI EHCI root HUB> at usbus7
ugen2.1: <ATI EHCI root HUB> at usbus2
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen4.1: <ATI EHCI root HUB> at usbus4
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub6: 2 ports with 2 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub7: 5 ports with 5 removable, self powered
ugen2.2: <vendor 0x046d product 0x081b> at usbus2
uaudio0 on uhub2
uaudio0: <vendor 0x046d product 0x081b, class 239/2, rev 2.00/0.10, addr 2> on usbus2
uaudio0: No playback.
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 32000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 24000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No MIDI sequencer.
pcm6: <USB audio> on uaudio0
uaudio0: No HID volume keys found.
ugen3.2: <Logitech USB Receiver> at usbus3
ukbd0 on uhub5
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus3
kbd2 at ukbd0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <OCZ-VERTEX2 1.23> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <Hitachi HDS723030ALA640 MKAOA3B0> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors)
pt0 at sym1 bus 0 scbus9 target 4 lun 0
pt0: <EPSON SC ANNER GT-9000 1.11> Fixed Processor SCSI-1 device
pt0: 3.300MB/s transfers
cd0 at ahcich5 bus 0 scbus7 target 0 lun 0
cd0: <ASUS BW-16D1HT 3.01> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
random: unblocking device.
Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]...
cd2 at sym0 bus 0 scbus8 target 3 lun 0
cd2: <NEC CD-ROM DRIVE:502 2.0r> Removable CD-ROM SCSI-2 device
cd2: 8.064MB/s transfers (8.064MHz, offset 8)
cd2: Attempt to query device size failed: NOT READY, Medium not present
da0 at sym0 bus 0 scbus8 target 2 lun 0
da0: <FUJITSU M2512A 1314> Removable Direct Access SCSI-1 device
da0: 5.000MB/s transfers (5.000MHz, offset 8)
da0: Attempt to query device size failed: NOT READY, Error log overflow
cd1 at sym0 bus 0 scbus8 target 1 lun 0
cd1: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present
nvidia0: <GeForce GT 1030> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub5
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus3
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub5
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus3
WARNING: attempt to domain_add(bluetooth) after domainfinalize()