Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-14 13:04:47
From: wjw
Description: FreeBSD/amd64 on Supermicro C2SBX
em0: Watchdog timeout Queue[0]-- resetting
Interface is RUNNING and ACTIVE
em0: TX Queue 0 ------
em0: hw tdh = 432, hw tdt = 469
em0: Tx Queue Status = -2147483648
em0: TX descriptors avail = 987
em0: Tx Descriptors avail failure = 0
em0: RX Queue 0 ------
em0: hw rdh = 944, hw rdt = 943
em0: RX discarded packets = 0
em0: RX Next to Check = 944
em0: RX Next to Refresh = 943
em0: link state changed to DOWN
em0: link state changed to UP
ahcich2: Timeout on slot 12 port 0
ahcich2: is 00000008 cs 00000000 ss 00000000 rs 00001000 tfd 40 serr 00000000 cmd 10008c17
(ada1:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 40 34 aa 40 09 00 00 00 00 00
(ada1:ahcich2:0:0:0): CAM status: Command timeout
(ada1:ahcich2:0:0:0): Retrying command
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 2099495, size: 4096
ahcich2: Timeout on slot 31 port 0
ahcich2: is 00000008 cs 00000000 ss 00000000 rs 80000000 tfd 40 serr 00000000 cmd 10009f17
(ada1:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 10 88 da 11 40 00 00 00 00 00 00
(ada1:ahcich2:0:0:0): CAM status: Command timeout
(ada1:ahcich2:0:0:0): Retrying command
Accounting enabled
Accounting disabled
em0: link state changed to DOWN
em0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
ahcich2: Timeout on slot 10 port 0
ahcich2: is 00000008 cs 00000000 ss 00000000 rs 00000400 tfd 40 serr 00000000 cmd 10008a17
(ada1:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 d8 87 39 40 09 00 00 00 00 00
(ada1:ahcich2:0:0:0): CAM status: Command timeout
(ada1:ahcich2:0:0:0): Retrying command
pid 75638 (mysqld), uid 88: exited on signal 11
pid 75778 (mysqld), uid 88: exited on signal 11
pid 75879 (mysqld), uid 1000: exited on signal 11
pid 76066 (mysqld), uid 0: exited on signal 11 (core dumped)
pid 76354 (mysqld), uid 88: exited on signal 11
pid 76549 (mysqld), uid 88: exited on signal 11
pid 76699 (mysqld), uid 0: exited on signal 11 (core dumped)
pid 77119 (mysqld), uid 0: exited on signal 11 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
All buffers synced.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #0: Thu Sep  6 07:14:16 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz (2833.39-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x1067a  Family=0x6  Model=0x17  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8257212416 (7874 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1416693376 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD 	 XSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20171214/dsfield-344)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20171214/psparse-677)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0x2030-0x2037,0x2024-0x2027,0x2028-0x202f,0x2020-0x2023,0x2000-0x201f mem 0xdf500000-0xdf5007ff irq 16 at device 0.0 on pci1
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci0: quirks=0x900<NOBSYRES,ALTSIG>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
arcmsr0: <Areca SATA 3G Host Adapter RAID Controller (RAID6 capable)
arcmsr version[_IP_XXXXX] 2017-10-30
> mem 0xdf600000-0xdf600fff,0xdf000000-0xdf3fffff irq 18 at device 14.0 on pci3
Areca RAID adapter0: ARC-1220 F/W version V1.49 2010-12-02 
pcib4: <PCI-PCI bridge> at device 0.2 on pci2
pci4: <PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x1820-0x183f mem 0xdfb00000-0xdfb1ffff,0xdfb27000-0xdfb27fff irq 16 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 16 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 17 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 18 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdfb28000-0xdfb283ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xdfb20000-0xdfb23fff irq 16 at device 27.0 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib5: [GIANT-LOCKED]
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib7: [GIANT-LOCKED]
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f mem 0xdf420000-0xdf43ffff,0xdf400000-0xdf41ffff irq 16 at device 0.0 on pci7
em1: Using an MSI interrupt
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 23 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 22 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdfb29000-0xdfb293ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xde000000-0xdeffffff,0xdf800000-0xdf800fff at device 1.0 on pci8
vgapci0: Boot video device
atapci0: <ITE IT8213F UDMA133 controller> port 0x4420-0x4427,0x4414-0x4417,0x4418-0x441f,0x4410-0x4413,0x4400-0x440f irq 23 at device 4.0 on pci8
ata2: <ATA channel> at channel 0 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c40-0x1c4f,0x1c30-0x1c3f at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
atapci2: <Intel ICH9 SATA300 controller> port 0x1cb8-0x1cbf,0x1cac-0x1caf,0x1cb0-0x1cb7,0x1ca8-0x1cab,0x1c60-0x1c6f,0x1c50-0x1c5f irq 18 at device 31.5 on pci0
ata3: <ATA channel> at channel 0 on atapci2
ata4: <ATA channel> at channel 1 on atapci2
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC883 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC883 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC883 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,26,25 on hdaa0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
cd0 at ata2 bus 0 scbus9 target 1 lun 0
ada0: <Samsung SSD 840 PRO Series DXM05B0Q> ACS-2 ATA SATA 3.x device
cd0: <MATSHITA DVD-ROM UJDA780 1.50> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfersada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
 (UDMA2, ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada1: <Samsung SSD 840 PRO Series DXM05B0Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 122104MB (250069680 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada2 at ata0 bus 0 scbus10 target 0 lun 0
ada2: <WDC WD5003ABYX-01WERA0 01.01S01> ATA8-ACS SATA 2.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 476940MB (976773168 512 byte sectors)
ada3 at ata0 bus 0 scbus10 target 1 lun 0
ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 2861588MB (5860533168 512 byte sectors)
ada3: quirks=0x1<4K>
ada4 at ata1 bus 0 scbus11 target 0 lun 0
ada4: <VB0250EAVER HPG7> ATA8-ACS SATA 2.x device
ada4: [_SERIAL_NUMBER_XXXXX]
ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada4: 238475MB (488397168 512 byte sectors)
ada5 at ata1 bus 0 scbus11 target 1 lun 0
ada5: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada5: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada5: 2861588MB (5860533168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ata3 bus 0 scbus12 target 0 lun 0
ada6: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada6: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada6: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada6: 2861588MB (5860533168 512 byte sectors)
ada6: quirks=0x1<4K>
ada7 at ata4 bus 0 scbus13 target 0 lun 0
ada7: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada7: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada7: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada7: 2861588MB (5860533168 512 byte sectors)
ada7: quirks=0x1<4K>
da0 at arcmsr0 bus 0 scbus8 target 0 lun 0
pass2 at ahcich7 bus 0 scbus7 target 0 lun 0
da0: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
pass2: da0: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
<Marvell Console 1.01> Removable Processor SCSI device
pass2: [_SERIAL_NUMBER_XXXXXXXXX]
pass2: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, da0: 250.000MB/s transfersPIO 8192bytes)
 (125.000MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors)
pass11 at arcmsr0 bus 0 scbus8 target 16 lun 0
da1 at arcmsr0 bus 0 scbus8 target 1 lun 0
pass11: da1: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
<Areca RAID controller R001> Fixed Processor SCSI device
da1: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors)
da2 at arcmsr0 bus 0 scbus8 target 2 lun 0
da2: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da2: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors)
da3 at arcmsr0 bus 0 scbus8 target 3 lun 0
da3: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da3: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors)
da4 at arcmsr0 bus 0 scbus8 target 4 lun 0
da4: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da4: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors)
da5 at arcmsr0 bus 0 scbus8 target 5 lun 0
da5: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da5: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors)
da6 at arcmsr0 bus 0 scbus8 target 6 lun 0
da6: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da6: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da6: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da6: Command Queueing enabled
da6: 2861588MB (5860533168 512 byte sectors)
da7 at arcmsr0 bus 0 scbus8 target 7 lun 0
da7: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da7: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da7: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da7: Command Queueing enabled
da7: 2861588MB (5860533168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub6: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7
ugen5.2: <American Power Conversion Smart-UPS 1500 RM FW617.3.I USB FW1.5> at usbus5
random: unblocking device.
em1: link state changed to UP
em0: link state changed to UP
pid 1012 (mysqld), uid 88: exited on signal 11
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 4m21s
em0: link state changed to DOWN
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #0: Thu Sep  6 07:14:16 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz (2833.39-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x1067a  Family=0x6  Model=0x17  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8257212416 (7874 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1416696326 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD 	 XSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20171214/dsfield-344)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20171214/psparse-677)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0x2030-0x2037,0x2024-0x2027,0x2028-0x202f,0x2020-0x2023,0x2000-0x201f mem 0xdf500000-0xdf5007ff irq 16 at device 0.0 on pci1
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci0: quirks=0x900<NOBSYRES,ALTSIG>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
arcmsr0: <Areca SATA 3G Host Adapter RAID Controller (RAID6 capable)
arcmsr version[_IP_XXXXX] 2017-10-30
> mem 0xdf600000-0xdf600fff,0xdf000000-0xdf3fffff irq 18 at device 14.0 on pci3
Areca RAID adapter0: ARC-1220 F/W version V1.49 2010-12-02 
pcib4: <PCI-PCI bridge> at device 0.2 on pci2
pci4: <PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x1820-0x183f mem 0xdfb00000-0xdfb1ffff,0xdfb27000-0xdfb27fff irq 16 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 16 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 17 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 18 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdfb28000-0xdfb283ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xdfb20000-0xdfb23fff irq 16 at device 27.0 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib5: [GIANT-LOCKED]
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib7: [GIANT-LOCKED]
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f mem 0xdf420000-0xdf43ffff,0xdf400000-0xdf41ffff irq 16 at device 0.0 on pci7
em1: Using an MSI interrupt
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 23 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 22 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdfb29000-0xdfb293ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xde000000-0xdeffffff,0xdf800000-0xdf800fff at device 1.0 on pci8
vgapci0: Boot video device
atapci0: <ITE IT8213F UDMA133 controller> port 0x4420-0x4427,0x4414-0x4417,0x4418-0x441f,0x4410-0x4413,0x4400-0x440f irq 23 at device 4.0 on pci8
ata2: <ATA channel> at channel 0 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c40-0x1c4f,0x1c30-0x1c3f at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
atapci2: <Intel ICH9 SATA300 controller> port 0x1cb8-0x1cbf,0x1cac-0x1caf,0x1cb0-0x1cb7,0x1ca8-0x1cab,0x1c60-0x1c6f,0x1c50-0x1c5f irq 18 at device 31.5 on pci0
ata3: <ATA channel> at channel 0 on atapci2
ata4: <ATA channel> at channel 1 on atapci2
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC883 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC883 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC883 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,26,25 on hdaa0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
cd0 at ata2 bus 0 scbus9 target 1 lun 0
ada0: <Samsung SSD 840 PRO Series DXM05B0Q> ACS-2 ATA SATA 3.x device
cd0: <MATSHITA DVD-ROM UJDA780 1.50> Removable CD-ROM SCSI device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada1: <Samsung SSD 840 PRO Series DXM05B0Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 122104MB (250069680 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada2 at ata0 bus 0 scbus10 target 0 lun 0
ada2: <WDC WD5003ABYX-01WERA0 01.01S01> ATA8-ACS SATA 2.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 476940MB (976773168 512 byte sectors)
ada3 at ata0 bus 0 scbus10 target 1 lun 0
ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 2861588MB (5860533168 512 byte sectors)
ada3: quirks=0x1<4K>
ada4 at ata1 bus 0 scbus11 target 0 lun 0
ada4: <VB0250EAVER HPG7> ATA8-ACS SATA 2.x device
ada4: [_SERIAL_NUMBER_XXXXX]
ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada4: 238475MB (488397168 512 byte sectors)
ada5 at ata1 bus 0 scbus11 target 1 lun 0
ada5: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada5: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada5: 2861588MB (5860533168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ata3 bus 0 scbus12 target 0 lun 0
ada6: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada6: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada6: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada6: 2861588MB (5860533168 512 byte sectors)
ada6: quirks=0x1<4K>
ada7 at ata4 bus 0 scbus13 target 0 lun 0
ada7: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
ada7: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada7: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada7: 2861588MB (5860533168 512 byte sectors)
ada7: quirks=0x1<4K>
da0 at arcmsr0 bus 0 scbus8 target 0 lun 0
pass2 at ahcich7 bus 0 scbus7 target 0 lun 0
da0: pass2: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
<Marvell Console 1.01> Removable Processor SCSI device
da0: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors)
da1 at arcmsr0 bus 0 scbus8 target 1 lun 0
pass2: [_SERIAL_NUMBER_XXXXXXXXX]
da1: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da1: 250.000MB/s transfers (125.000MHz, offset 32pass2: 150.000MB/s transfers, 16bit)
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors)
 (da2 at arcmsr0 bus 0 scbus8 target 2 lun 0
SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
da2: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da2: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors)
pass11 at arcmsr0 bus 0 scbus8 target 16 lun 0
da3 at arcmsr0 bus 0 scbus8 target 3 lun 0
pass11: <Areca RAID controller R001> Fixed Processor SCSI device
da3: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da3: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors)
da4 at arcmsr0 bus 0 scbus8 target 4 lun 0
da4: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da4: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors)
da5 at arcmsr0 bus 0 scbus8 target 5 lun 0
da5: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da5: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors)
da6 at arcmsr0 bus 0 scbus8 target 6 lun 0
da6: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da6: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da6: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da6: Command Queueing enabled
da6: 2861588MB (5860533168 512 byte sectors)
da7 at arcmsr0 bus 0 scbus8 target 7 lun 0
da7: <WDC WD30EFRX-68AX9N0 R001> Fixed Direct Access SPC-3 SCSI device
da7: [_SERIAL_NUMBER_XXXXXXXXXXXX] 
da7: 250.000MB/s transfers (125.000MHz, offset 32, 16bit)
da7: Command Queueing enabled
da7: 2861588MB (5860533168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus7 usbus3
uhub1: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
random: unblocking device.
ugen5.2: <American Power Conversion Smart-UPS 1500 RM FW617.3.I USB FW1.5> at usbus5
em1: link state changed to UP
em0: link state changed to UP