Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-15 04:01:48
From: Enaunimes
Description: ThinkPad E130 (used as headless server)
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #13: Fri Sep 28 13:47:01 CST 2018
    root@mobstation:/usr/obj/usr/src/sys/MOBSTATION amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 640x480
CPU: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (1795.96-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x3dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 6442450944 (6144 MB)
avail memory = 6037725184 (5758 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-H4   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1795960776 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-H4> on motherboard
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method execution failed \134_SB.BAT1._STA, AE_NOT_EXIST (20171214/uteval-219)
cpu0: <ACPI CPU> on acpi0
ACPI Error: No handler for Region [ERAM] (0xfffff80002edfa00) [EmbeddedControl] (20171214/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20171214/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.ACAD._PSR, AE_NOT_EXIST (20171214/psparse-677)
ACPI Error: Method parse/execution failed \134_PR.CPU0._CST, AE_NOT_EXIST (20171214/psparse-677)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x4
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf1700000-0xf170ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf171a000-0xf171a3ff at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib3
pci3: <unknown> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf0c04000-0xf0c04fff,0xf0c00000-0xf0c03fff at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf1719000-0xf17193ff at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xf1718000-0xf17187ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD5000LPVX-08V0TT5 05.01A05> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <GLOWAY VAL32GS3-mSATA Q0707A> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 30029MB (61500000 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub1: 8 ports with 8 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <Vimicro corp. Integrated Camera> at usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.3: <Ugreen 30849> at usbus0
umass0 on uhub1
umass0: <Ugreen 30849, class 0/0, rev 3.10/3.36, addr 2> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:3:0: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <WDC WD50 00AAKX-22ERM 17.0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.3: <vendor 0x8087 product 0x07da> at usbus2
ugen0.4: <Ugreen Ugreen Storage Device> at usbus0
umass1 on uhub1
umass1: <Ugreen Ugreen Storage Device, class 0/0, rev 3.10/3.36, addr 3> on usbus0
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:4:1: Attached to scbus4
da1 at umass-sim1 bus 1 scbus4 target 0 lun 0
da1: <HGST HTS 541010B7E610 04.0> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 400.000MB/s transfers
da1: 953869MB (1953525168 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
random: unblocking device.
[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Memory usable by graphics device = 2048M
Failed to add WC MTRR for [0xe0000000-0xefffffff]: -28; performance may suffer
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector LVDS-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.LVDS-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector VGA-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.VGA-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=4227072
pbase=0xe018e000 vbase=0xfffff800e018e000
name=drmn0 flags=0x0 stride=5504 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge1: Ethernet address: [_MAC_XXXXXXXXXX]
epair0a: Ethernet address: [_MAC_XXXXXXXXXX]
epair0b: Ethernet address: [_MAC_XXXXXXXXXX]
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: [_MAC_XXXXXXXXXX]
epair1b: Ethernet address: [_MAC_XXXXXXXXXX]
epair1a: link state changed to UP
epair1b: link state changed to UP
re0: link state changed to DOWN
re0: promiscuous mode enabled
bridge0: link state changed to DOWN
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
epair1a: promiscuous mode enabled
pflog0: promiscuous mode enabled
CPU: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (1795.96-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x3dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
tun1: link state changed to UP
re0: link state changed to UP
tun0: link state changed to UP
GEOM: da0: the primary GPT table is corrupt or invalid.
GEOM: da0: using the secondary instead -- recovery strongly advised.
ugen0.4: <Ugreen Ugreen Storage Device> at usbus0 (disconnected)
umass1: at uhub1, port 6, addr 3 (disconnected)
da1 at umass-sim1 bus 1 scbus4 target 0 lun 0
da1: <HGST HTS 541010B7E610 04.0> s/n 000000123F1E detached
(da1:umass-sim1:1:0:0): Periph destroyed
umass1: detached
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on epair0b
arp:[_IP_XXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on epair0b
re0: link state changed to DOWN
re0: link state changed to UP
GEOM: da0: the primary GPT table is corrupt or invalid.
GEOM: da0: using the secondary instead -- recovery strongly advised.
ugen0.3: <Ugreen 30849> at usbus0 (disconnected)
umass0: at uhub1, port 5, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <WDC WD50 00AAKX-22ERM 17.0> s/n 0000001252BB detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
Limiting open port RST response from 217 to 200 packets/sec
ugen0.3: <Ugreen 30849> at usbus0
umass0 on uhub1
umass0: <Ugreen 30849, class 0/0, rev 3.10/3.36, addr 4> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc101
umass0:3:0: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <WDC WD50 00AAKX-22ERM 17.0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
GEOM: da0: the primary GPT table is corrupt or invalid.
GEOM: da0: using the secondary instead -- recovery strongly advised.