Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-15 08:19:23
From: gk
Description: FreeBSD/amd64 on Supermicro X9SRL-F
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 43 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <Avago Technologies (LSI) SAS2004> port 0xe000-0xe0ff mem 0xfb400000-0xfb403fff,0xfb380000-0xfb3bffff irq 40 at device 0.0 on pci4
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib5: <ACPI PCI-PCI bridge> irq 43 at device 3.1 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 43 at device 3.2 on pci0
pci6: <ACPI PCI bus> on pcib6
mps1: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xfae00000-0xfae03fff,0xfad80000-0xfadbffff irq 42 at device 0.0 on pci6
mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfba23000-0xfba233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci9: <ACPI PCI bus> on pcib9
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xfb900000-0xfb91ffff,0xfb920000-0xfb923fff irq 18 at device 0.0 on pci9
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci10: <ACPI PCI bus> on pcib10
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb823fff irq 19 at device 0.0 on pci10
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfba22000-0xfba223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfa800000-0xfa803fff,0xfa000000-0xfa7fffff irq 16 at device 4.0 on pci11
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfba21000-0xfba217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib12: <ACPI Host-PCI bridge> on acpi0
pci12: <ACPI PCI bus> on pcib12
pci12: <dasp, performance counters> at device 14.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mps0: SAS Address for SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address for SATA device = 243b7d9fa58aa99c
mps0: SAS Address from SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address from SATA device = 243b7d9fa58aa99c
mps1: SAS Address for SATA device = 243b7d9ca09c80a1
mps1: SAS Address for SATA device = 243b7d9d8d90829c
mps1: SAS Address for SATA device = 243b7da08699879c
mps1: SAS Address for SATA device = 243b7d9e9d9a9f9c
mps1: SAS Address from SATA device = 243b7d9ca09c80a1
mps1: SAS Address from SATA device = 243b7d9d8d90829c
mps1: SAS Address from SATA device = 243b7da08699879c
mps1: SAS Address from SATA device = 243b7d9e9d9a9f9c
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x2<NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
GEOM_STRIPEada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers: Device swap created (id=1740136889).
GEOM_STRIPE (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors)
ada1: quirks=0x2<NCQ_TRIM_BROKEN>
: Disk ada0p2 attached to swap.
Trying to mount root from ufs:/dev/mirror/root [rw]...
GEOM_STRIPE: Cannot add disk gpt/swap0 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/867746ac-da9a-11e3-9968-002590dbd938 to swap (error=17).
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_STRIPE: Disk ada1p2 attached to swap.
GEOM_STRIPE: Device stripe/swap activated.
GEOM_MIRROR: Device mirror/root launched (2/2).
da3 at mps1 bus 0 scbus1 target 1 lun 0
da3: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 3815447MB (7814037168 512 byte sectors)
da5 at mps1 bus 0 scbus1 target 3 lun 0
da5: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 3815447MB (7814037168 512 byte sectors)
da2 at mps1 bus 0 scbus1 target 0 lun 0
da2: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 3815447MB (7814037168 512 byte sectors)
da4 at mps1 bus 0 scbus1 target 2 lun 0
da4: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 3815447MB (7814037168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 3815447MB (7814037168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 on uhub2
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <ATEN UC-10KM V1.3.124> at usbus1
ukbd1 on uhub3
ukbd1: <HID Keyboard> on usbus1
kbd3 at ukbd1
GEOM_STRIPE: Cannot add disk gpt/swap1 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/8a5b9187-da9a-11e3-9968-002590dbd938 to swap (error=17).
random: unblocking device.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lagg0: link state changed to DOWN
ums0 on uhub2
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums1 on uhub3
ums0: 3 buttons and [Z] coordinates ID=0
ums1: <HID Mouse> on usbus1
ums1: 5 buttons and [XYZ] coordinates ID=0
em1: link state changed to UP
lagg0: link state changed to UP
em0: link state changed to UP
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
tun0: link state changed to UP
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 33 33 33 33 33 0 0 0 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 55m40s
GEOM_MIRROR: Device root: provider destroyed.
GEOM_MIRROR: Device root destroyed.
GEOM_MIRROR: Device boot: provider destroyed.
GEOM_MIRROR: Device boot destroyed.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p1 #0: Sun Aug 5 12:04:13 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16522719232 (15757 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1850036770 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 27 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xf9000000-0xf91fffff,0xf9200000-0xf9203fff irq 26 at device 0.0 on pci1
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 43 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <Avago Technologies (LSI) SAS2004> port 0xe000-0xe0ff mem 0xfb400000-0xfb403fff,0xfb380000-0xfb3bffff irq 40 at device 0.0 on pci4
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib5: <ACPI PCI-PCI bridge> irq 43 at device 3.1 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 43 at device 3.2 on pci0
pci6: <ACPI PCI bus> on pcib6
mps1: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xfae00000-0xfae03fff,0xfad80000-0xfadbffff irq 42 at device 0.0 on pci6
mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfba23000-0xfba233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci9: <ACPI PCI bus> on pcib9
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xfb900000-0xfb91ffff,0xfb920000-0xfb923fff irq 18 at device 0.0 on pci9
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci10: <ACPI PCI bus> on pcib10
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb823fff irq 19 at device 0.0 on pci10
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfba22000-0xfba223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfa800000-0xfa803fff,0xfa000000-0xfa7fffff irq 16 at device 4.0 on pci11
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfba21000-0xfba217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib12: <ACPI Host-PCI bridge> on acpi0
pci12: <ACPI PCI bus> on pcib12
pci12: <dasp, performance counters> at device 14.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mps0: SAS Address for SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address for SATA device = 243b7d9fa58aa99c
mps0: SAS Address from SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address from SATA device = 243b7d9fa58aa99c
mps1: SAS Address for SATA device = 243b7d9ca09c80a1
mps1: SAS Address for SATA device = 243b7d9d8d90829c
mps1: SAS Address for SATA device = 243b7da08699879c
mps1: SAS Address for SATA device = 243b7d9e9d9a9f9c
mps1: SAS Address from SATA device = 243b7d9ca09c80a1
mps1: SAS Address from SATA device = 243b7d9d8d90829c
mps1: SAS Address from SATA device = 243b7da08699879c
mps1: SAS Address from SATA device = 243b7d9e9d9a9f9c
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x2<NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
GEOM_STRIPEada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors)
ada1: quirks=0x2<NCQ_TRIM_BROKEN>
: Device swap created (id=1740136889).
GEOM_STRIPE: Disk ada0p2 attached to swap.
Trying to mount root from ufs:/dev/mirror/root [rw]...
GEOM_STRIPE: Cannot add disk gpt/swap0 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/867746ac-da9a-11e3-9968-002590dbd938 to swap (error=17).
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_STRIPE: Disk ada1p2 attached to swap.
GEOM_STRIPE: Device stripe/swap activated.
GEOM_MIRROR: Device mirror/root launched (2/2).
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 3815447MB (7814037168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors)
da2 at mps1 bus 0 scbus1 target 0 lun 0
da2: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 3815447MB (7814037168 512 byte sectors)
da4 at mps1 bus 0 scbus1 target 2 lun 0
da4: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 3815447MB (7814037168 512 byte sectors)
da3 at mps1 bus 0 scbus1 target 1 lun 0
da3: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 3815447MB (7814037168 512 byte sectors)
da5 at mps1 bus 0 scbus1 target 3 lun 0
da5: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 3815447MB (7814037168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 on uhub3
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <ATEN UC-10KM V1.3.124> at usbus1
ukbd1 on uhub2
ukbd1: <HID Keyboard> on usbus1
kbd3 at ukbd1
GEOM_STRIPE: Cannot add disk gpt/swap1 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/8a5b9187-da9a-11e3-9968-002590dbd938 to swap (error=17).
random: unblocking device.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lagg0: link state changed to DOWN
ums0 on uhub3
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums1 on uhub2
ums0: 3 buttons and [Z] coordinates ID=0
ums1: <HID Mouse> on usbus1
ums1: 5 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
lagg0: link state changed to UP
em1: link state changed to UP
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
tun0: link state changed to UP
pid 9825 (dd), uid 2 inumber 6821989 on /: filesystem full
pid 9789 (rsync), uid 0 inumber 3956385 on /: filesystem full
pid 9832 (rsync), uid 0 inumber 3956571 on /: filesystem full
pid 9839 (rsync), uid 0 inumber 3956822 on /: filesystem full
pid 9846 (rsync), uid 0 inumber 3957307 on /: filesystem full
pid 9853 (rsync), uid 0 inumber 3957937 on /: filesystem full
pid 9860 (rsync), uid 0 inumber 3958329 on /: filesystem full
pid 9865 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9874 (rsync), uid 0 inumber 3958955 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9872 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9881 (rsync), uid 0 inumber 3959292 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9879 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9890 (rsync), uid 0 inumber 3959786 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9888 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9896 (rsync), uid 0 inumber 3959795 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9896 (rsync), uid 0 inumber 3959795 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9897 (rsync), uid 0 inumber 3960364 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 700 (syslogd), uid 0 inumber 6821970 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 700 (syslogd), uid 0 inumber 6821970 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 700 (syslogd), uid 0 inumber 6821970 on /: filesystem full
pid 9895 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9904 (rsync), uid 0 inumber 3960638 on /: filesystem full
pid 700 (syslogd), uid 0 inumber 6821970 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 700 (syslogd), uid 0 inumber 6821970 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 9902 (rsync), uid 0 inumber 2006407 on /: filesystem full
pid 700 (syslogd), uid 0 inumber 6821970 on /: filesystem full
pid 9932 (sendmail), uid 25 inumber 6822225 on /: filesystem full
pid 9949 (dd), uid 2 inumber 6823008 on /: filesystem full
pid 9969 (dd), uid 2 inumber 6821839 on /: filesystem full
pid 9985 (dd), uid 2 inumber 6821903 on /: filesystem full
pid 10012 (dd), uid 2 inumber 6822013 on /: filesystem full
pid 10040 (dd), uid 2 inumber 6821829 on /: filesystem full
pid 10058 (dd), uid 2 inumber 6821866 on /: filesystem full
pid 10074 (dd), uid 2 inumber 6821998 on /: filesystem full
pid 10094 (dd), uid 2 inumber 6821840 on /: filesystem full
pid 10110 (dd), uid 2 inumber 6821989 on /: filesystem full
pid 10137 (dd), uid 2 inumber 6822225 on /: filesystem full
pid 10163 (dd), uid 2 inumber 6821839 on /: filesystem full
pid 10179 (dd), uid 2 inumber 6821903 on /: filesystem full
pid 10195 (dd), uid 2 inumber 6822013 on /: filesystem full
pid 10215 (dd), uid 2 inumber 6821829 on /: filesystem full
pid 10231 (dd), uid 2 inumber 6821866 on /: filesystem full
pid 10259 (dd), uid 2 inumber 6822041 on /: filesystem full
pid 10284 (dd), uid 2 inumber 6821840 on /: filesystem full
pid 10300 (dd), uid 2 inumber 6821989 on /: filesystem full
pid 10316 (dd), uid 2 inumber 6821998 on /: filesystem full
pid 10336 (dd), uid 2 inumber 6821839 on /: filesystem full
pid 10352 (dd), uid 2 inumber 6821903 on /: filesystem full
pid 10379 (dd), uid 2 inumber 6822225 on /: filesystem full
pid 10405 (dd), uid 2 inumber 6821995 on /: filesystem full
pid 10421 (dd), uid 2 inumber 6821866 on /: filesystem full
pid 10437 (dd), uid 2 inumber 6822013 on /: filesystem full
pid 10457 (dd), uid 2 inumber 6821840 on /: filesystem full
pid 10473 (dd), uid 2 inumber 6821989 on /: filesystem full
pid 10501 (dd), uid 2 inumber 6822041 on /: filesystem full
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 1d0h14m34s
GEOM_MIRROR: Device root: provider destroyed.
GEOM_MIRROR: Device root destroyed.
GEOM_MIRROR: Device boot: provider destroyed.
GEOM_MIRROR: Device boot destroyed.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p1 #0: Sun Aug 5 12:04:13 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16522719232 (15757 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1850040966 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 27 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xf9000000-0xf91fffff,0xf9200000-0xf9203fff irq 26 at device 0.0 on pci1
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 43 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <Avago Technologies (LSI) SAS2004> port 0xe000-0xe0ff mem 0xfb400000-0xfb403fff,0xfb380000-0xfb3bffff irq 40 at device 0.0 on pci4
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib5: <ACPI PCI-PCI bridge> irq 43 at device 3.1 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 43 at device 3.2 on pci0
pci6: <ACPI PCI bus> on pcib6
mps1: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xfae00000-0xfae03fff,0xfad80000-0xfadbffff irq 42 at device 0.0 on pci6
mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfba23000-0xfba233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci9: <ACPI PCI bus> on pcib9
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xfb900000-0xfb91ffff,0xfb920000-0xfb923fff irq 18 at device 0.0 on pci9
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci10: <ACPI PCI bus> on pcib10
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb823fff irq 19 at device 0.0 on pci10
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfba22000-0xfba223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfa800000-0xfa803fff,0xfa000000-0xfa7fffff irq 16 at device 4.0 on pci11
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfba21000-0xfba217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib12: <ACPI Host-PCI bridge> on acpi0
pci12: <ACPI PCI bus> on pcib12
pci12: <dasp, performance counters> at device 14.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mps0: SAS Address for SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address for SATA device = 243b7d9fa58aa99c
mps0: SAS Address from SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address from SATA device = 243b7d9fa58aa99c
mps1: SAS Address for SATA device = 243b7d9ca09c80a1
mps1: SAS Address for SATA device = 243b7d9d8d90829c
mps1: SAS Address for SATA device = 243b7da08699879c
mps1: SAS Address for SATA device = 243b7d9e9d9a9f9c
mps1: SAS Address from SATA device = 243b7d9ca09c80a1
mps1: SAS Address from SATA device = 243b7d9d8d90829c
mps1: SAS Address from SATA device = 243b7da08699879c
mps1: SAS Address from SATA device = 243b7d9e9d9a9f9c
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x2<NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
GEOM_STRIPEada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers: Device swap created (id=1740136889).
GEOM_STRIPE (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors)
ada1: quirks=0x2<NCQ_TRIM_BROKEN>
: Disk ada0p2 attached to swap.
Trying to mount root from ufs:/dev/mirror/root [rw]...
GEOM_STRIPE: Cannot add disk gpt/swap0 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/867746ac-da9a-11e3-9968-002590dbd938 to swap (error=17).
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_STRIPE: Disk ada1p2 attached to swap.
GEOM_STRIPE: Device stripe/swap activated.
GEOM_MIRROR: Device mirror/root launched (2/2).
da3 at mps1 bus 0 scbus1 target 1 lun 0
da3: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 3815447MB (7814037168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 3815447MB (7814037168 512 byte sectors)
da5 at mps1 bus 0 scbus1 target 3 lun 0
da5: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 3815447MB (7814037168 512 byte sectors)
da4 at mps1 bus 0 scbus1 target 2 lun 0
da4: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 3815447MB (7814037168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors)
da2 at mps1 bus 0 scbus1 target 0 lun 0
da2: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 3815447MB (7814037168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 on uhub3
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <ATEN UC-10KM V1.3.124> at usbus1
ukbd1 on uhub2
ukbd1: <HID Keyboard> on usbus1
kbd3 at ukbd1
GEOM_STRIPE: Cannot add disk gpt/swap1 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/8a5b9187-da9a-11e3-9968-002590dbd938 to swap (error=17).
random: unblocking device.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lagg0: link state changed to DOWN
ums0 on uhub3
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums1 on uhub2
ums0: 3 buttons and [Z] coordinates ID=0
ums1: <HID Mouse> on usbus1
ums1: 5 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
lagg0: link state changed to UP
em1: link state changed to UP
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
tun0: link state changed to UP
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 4 4 4 4 4 4 1 0 0 0 0 0 0 0 0 0 0 done
All buffers synced.
Uptime: 15m50s
GEOM_MIRROR: Device root: provider destroyed.
GEOM_MIRROR: Device root destroyed.
GEOM_MIRROR: Device boot: provider destroyed.
GEOM_MIRROR: Device boot destroyed.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p1 #0: Sun Aug 5 12:04:13 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16522719232 (15757 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1850041128 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 27 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xf9000000-0xf91fffff,0xf9200000-0xf9203fff irq 26 at device 0.0 on pci1
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 43 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <Avago Technologies (LSI) SAS2004> port 0xe000-0xe0ff mem 0xfb400000-0xfb403fff,0xfb380000-0xfb3bffff irq 40 at device 0.0 on pci4
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib5: <ACPI PCI-PCI bridge> irq 43 at device 3.1 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 43 at device 3.2 on pci0
pci6: <ACPI PCI bus> on pcib6
mps1: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xfae00000-0xfae03fff,0xfad80000-0xfadbffff irq 42 at device 0.0 on pci6
mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfba23000-0xfba233ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci9: <ACPI PCI bus> on pcib9
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xc000-0xc01f mem 0xfb900000-0xfb91ffff,0xfb920000-0xfb923fff irq 18 at device 0.0 on pci9
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci10: <ACPI PCI bus> on pcib10
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xb000-0xb01f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb823fff irq 19 at device 0.0 on pci10
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfba22000-0xfba223ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfa800000-0xfa803fff,0xfa000000-0xfa7fffff irq 16 at device 4.0 on pci11
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfba21000-0xfba217ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib12: <ACPI Host-PCI bridge> on acpi0
pci12: <ACPI PCI bus> on pcib12
pci12: <dasp, performance counters> at device 14.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mps0: SAS Address for SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address for SATA device = 243b7d9fa58aa99c
mps0: SAS Address from SATA device = 243b7d9d8d9d9d9c
mps0: SAS Address from SATA device = 243b7d9fa58aa99c
mps1: SAS Address for SATA device = 243b7d9ca09c80a1
mps1: SAS Address for SATA device = 243b7d9d8d90829c
mps1: SAS Address for SATA device = 243b7da08699879c
mps1: SAS Address for SATA device = 243b7d9e9d9a9f9c
mps1: SAS Address from SATA device = 243b7d9ca09c80a1
mps1: SAS Address from SATA device = 243b7d9d8d90829c
mps1: SAS Address from SATA device = 243b7da08699879c
mps1: SAS Address from SATA device = 243b7d9e9d9a9f9c
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x2<NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <Crucial CT120M500SSD1 MU05> ACS-2 ATA SATA 3.x device
GEOM_STRIPEada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors)
ada1: quirks=0x2<NCQ_TRIM_BROKEN>
: Device swap created (id=1740136889).
GEOM_STRIPE: Disk ada0p2 attached to swap.
Trying to mount root from ufs:/dev/mirror/root [rw]...
GEOM_STRIPE: Cannot add disk gpt/swap0 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/867746ac-da9a-11e3-9968-002590dbd938 to swap (error=17).
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_STRIPE: Disk ada1p2 attached to swap.
GEOM_STRIPE: Device stripe/swap activated.
GEOM_MIRROR: Device mirror/root launched (2/2).
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors)
da3 at mps1 bus 0 scbus1 target 1 lun 0
da3: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 3815447MB (7814037168 512 byte sectors)
da2 at mps1 bus 0 scbus1 target 0 lun 0
da2: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 3815447MB (7814037168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 3815447MB (7814037168 512 byte sectors)
da5 at mps1 bus 0 scbus1 target 3 lun 0
da5: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 3815447MB (7814037168 512 byte sectors)
da4 at mps1 bus 0 scbus1 target 2 lun 0
da4: <ATA HGST HDN724040AL A5E0> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXX]
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 3815447MB (7814037168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 on uhub2
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
ugen1.3: <ATEN UC-10KM V1.3.124> at usbus1
ukbd1 on uhub3
ukbd1: <HID Keyboard> on usbus1
kbd3 at ukbd1
GEOM_STRIPE: Cannot add disk gpt/swap1 to swap (error=17).
GEOM_STRIPE: Cannot add disk gptid/8a5b9187-da9a-11e3-9968-002590dbd938 to swap (error=17).
random: unblocking device.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lagg0: link state changed to DOWN
ums0 on uhub2
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ums1 on uhub3
ums1: <HID Mouse> on usbus1
ums1: 5 buttons and [XYZ] coordinates ID=0
em0: link state changed to UP
lagg0: link state changed to UP
em1: link state changed to UP
CPU: Intel(R) Xeon(R) CPU E5-1620 v2 @ 3.70GHz (3700.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics