Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-20 08:01:29
From: Maurizio-emmex
Description: FreeBSD/amd64 on SAMSUNG ELECTRONICS CO., LTD. 300E5EV/300E4EV/270E5EV/270E4EV/2470EV/2470EE
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #25 fa797a5a3(trueos-master): Fri Mar 23 13:28:18 UTC 2018
    root@chimera:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (branches/release_60 324090) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz (2494.39-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x3dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8151072768 (7773 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SECCSD LH43STAR>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1247194320 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81031000, 0) error 19
kbd1 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: No AES or SHA support.
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
drmn0: <Intel IvyBridge (M)> on vgapci0
info: [drm] Memory usable by graphics device = 2048M
info: [drm] MTRR allocation failed.  Graphics performance may suffer.
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
intel_sdvo_ddc_proxy921920 on drmn0
intel_sdvo_ddc_proxy921920: detached
drm_iic_dp_aux0 on drmn0
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.LVDS-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf060a000-0xf060a3ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Panther Point HDA Controller> mem 0xf0600000-0xf0603fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ath0: <Atheros AR9485> mem 0xf0500000-0xf057ffff irq 16 at device 0.0 on pci1
ath0: Bluetooth Antenna Diversity card detected
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.6
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0404000-0xf0404fff,0xf0400000-0xf0403fff irq 19 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x40800000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf0609000-0xf06093ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xf0608000-0xf06087ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa0
pcm1: <Realtek ALC269 (Left Analog Mic)> at nid 24 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
ugen0.3: <Atheros Communications Bluetooth USB Host Controller> at usbus0
ugen0.4: <Webcam SC-10HDD12636P Webcam SC-10HDD12636P> at usbus0
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS545050A7E380 GG2OACD0> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:tank/ROOT/12.0-CURRENT-up-20180326_220855 []...
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <Slimtype DVD A DU8A5SH NS21> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt
[ar5210] loaded
[ar5211] loaded
[ar5212] loaded
[ar5416] loaded
[ar9300] loaded
[ath_rate] loaded
[ath_dfs] loaded
[ath] loaded
re0: link state changed to DOWN
Cuse v0.1.35 @ /dev/cuse
acpi_video0: <ACPI video extension> on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
GEOM_ELI: Device label/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software