Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-20 08:37:19
From: tuexen
Description: Softiron OverDrive 3000
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT r339441 TCP-NODEBUG arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT: init without driver.
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
Starting CPU 4 (200)
Starting CPU 5 (201)
Starting CPU 6 (300)
Starting CPU 7 (301)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
random: unblocking device.
random: entropy device external interface
MAP 8000000000 mode 2 pages 7808
MAP 83ff1ce000 mode 2 pages 296
MAP 83ff2f6000 mode 2 pages 2893
MAP e1050000 mode 0 pages 16
MAP e1300000 mode 0 pages 1
MAP e8200000 mode 0 pages 128
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
clk_fixed0: <Fixed clock> on simplebus0
clk_fixed1: <Fixed clock> on simplebus0
clk_fixed2: <Fixed clock> on simplebus0
clk_fixed3: <Fixed clock> on simplebus0
clk_fixed4: <Fixed clock> on simplebus0
clk_fixed5: <Fixed clock> on simplebus0
clk_fixed6: <Fixed clock> on simplebus0
clk_fixed7: <Fixed clock> on simplebus0
clk_fixed8: <Fixed clock> on simplebus0
clk_fixed9: <Fixed clock> on simplebus0
clk_fixed10: <Fixed clock> on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0xe1110000-0xe1110fff,0xe112f000-0xe1130fff,0xe1140000-0xe1141fff,0xe1160000-0xe1161fff irq 8 on ofwbus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 448
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x80000-0x80fff on gic0
generic_timer0: <ARMv8 Generic Timer> irq 9,10,11,12 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 250000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 250000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> irq 0,1,2,3,4,5,6,7 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cpu4: <Open Firmware CPU> on cpulist0
cpu5: <Open Firmware CPU> on cpulist0
cpu6: <Open Firmware CPU> on cpulist0
cpu7: <Open Firmware CPU> on cpulist0
ahci0: <AHCI SATA controller> mem 0xe0300000-0xe03effff irq 13 on simplebus0
ahci0: AHCI v1.30 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahci1: <AHCI SATA controller> mem 0xe0d00000-0xe0deffff irq 14 on simplebus0
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
ahcich10: <AHCI channel> at channel 2 on ahci1
ahcich11: <AHCI channel> at channel 3 on ahci1
ahcich12: <AHCI channel> at channel 4 on ahci1
ahcich13: <AHCI channel> at channel 5 on ahci1
uart0: <PrimeCell UART (PL011)> mem 0xe1010000-0xe1010fff irq 17 on simplebus0
uart0: console (115200,n,8,1)
pcib0: <Generic PCI host controller> mem 0xf0000000-0xffffffff on simplebus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.1 on pci0
pcib0: pci_host_generic_core_alloc_resource FAIL: type=4, rid=28, start=0000000000000000, end=0000000000000fff, count=0000000000001000, flags=0
pcib1: failed to allocate initial I/O port window: 0-0xfff
pci1: <PCI bus> on pcib1
pcib0: pci_host_generic_core_alloc_resource FAIL: type=4, rid=28, start=0000000000000000, end=0000000000000fff, count=0000000000001000, flags=3000
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7fffe80000-0x7fffefffff,0x7ffff04000-0x7ffff07fff at device 0.0 on pci1
ix0: using 2048 tx descriptors and 2048 rx descriptors
ix0: msix_init qsets capped at 16
ix0: pxm cpus: 8 queue msgs: 63 admincnt: 1
ix0: using 8 rx queues 8 tx queues 
ix0: Using MSIX interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x7fffe00000-0x7fffe7ffff,0x7ffff00000-0x7ffff03fff at device 0.1 on pci1
ix1: using 2048 tx descriptors and 2048 rx descriptors
ix1: msix_init qsets capped at 16
ix1: pxm cpus: 8 queue msgs: 63 admincnt: 1
ix1: using 8 rx queues 8 tx queues 
ix1: Using MSIX interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
axgbe0: <AMD 10 Gigabit Ethernet> mem 0xe0700000-0xe077ffff,0xe0780000-0xe07fffff,0xe1240800-0xe1240bff,0xe1250000-0xe125005f,0xe12500f8-0xe12500fb irq 29,30,31,32,33,34 on simplebus0
axgbe0: Ethernet address: [_MAC_XXXXXXXXXX]
axgbe1: <AMD 10 Gigabit Ethernet> mem 0xe0900000-0xe097ffff,0xe0980000-0xe09fffff,0xe1240c00-0xe1240fff,0xe1250080-0xe12500df,0xe12500fc-0xe12500ff irq 35,36,37,38,39,40 on simplebus0
axgbe1: Ethernet address: [_MAC_XXXXXXXXXX]
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
TCP Hpts created 8 swi interrupt thread and bound 0
Release APs...done
Trying to mount root from ufs:/dev/ada0p2 [rw]...
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
taskqgroup_attach_cpu_deferred: setaffinity failed: 3
CPU  0: ARM Cortex-A57 r1p2 affinity:  0  0
 Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <0>
      Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,16TB PA>
      Memory Model Features 1 = <>
      Memory Model Features 2 = <32b CCIDX,48b VA>
             Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
             Debug Features 1 = <0>
         Auxiliary Features 0 = <0>
         Auxiliary Features 1 = <0>
CPU  1: ARM Cortex-A57 r1p2 affinity:  0  1
CPU  2: ARM Cortex-A57 r1p2 affinity:  1  0
CPU  3: ARM Cortex-A57 r1p2 affinity:  1  1
CPU  4: ARM Cortex-A57 r1p2 affinity:  2  0
CPU  5: ARM Cortex-A57 r1p2 affinity:  2  1
CPU  6: ARM Cortex-A57 r1p2 affinity:  3  0
CPU  7: ARM Cortex-A57 r1p2 affinity:  3  1
lo0: link state changed to UP
ix1: link state changed to UP