Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-20 09:17:15
From: bga57
Description: FreeBSD/SUPERMICRO MBD-X10SL7-F-O /Xeon E3-1241 v3/November 2015
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz (3500.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33269538816 (31728 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1750034002 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2308> port 0xe000-0xe0ff mem 0xf7240000-0xf724ffff,0xf7200000-0xf723ffff irq 17 at device 0.0 on pci2
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 5a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7500000-0xf750ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7514000-0xf75143ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci4
vgapci0: Boot video device
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xf7400000-0xf747ffff,0xf7480000-0xf7483fff irq 18 at device 0.0 on pci5
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib6
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xb000-0xb01f mem 0xf7300000-0xf737ffff,0xf7380000-0xf7383fff irq 19 at device 0.0 on pci6
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: Bound queue 0 to cpu 4
igb1: Bound queue 1 to cpu 5
igb1: Bound queue 2 to cpu 6
igb1: Bound queue 3 to cpu 7
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7513000-0xf75133ff irq 22 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7512000-0xf75127ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mps0: SAS Address for SATA device = 83995c44b2abc094
ipmi0: IPMI device rev. 1, firmware rev. 1.92, version 2.0
mps0: SAS Address from SATA device = 83995c44b2abc094
ipmi0: Number of channels 2
mps0: SAS Address for SATA device = 83965836b4c1ad85
ipmi0: Attached watchdog
mps0: ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
SAS Address from SATA device = 83965836b4c1ad85
mps0: SAS Address for SATA device = 4868484fefc8ad85
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mps0: uhub1: SAS Address from SATA device = 4868484fefc8ad85
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mps0: SAS Address for SATA device = 4868484fefdad17e
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
mps0: SAS Address from SATA device = 4868484fefdad17e
mps0: SAS Address for SATA device = 4868484fefd1c580
mps0: SAS Address from SATA device = 4868484fefd1c580
mps0: SAS Address for SATA device = 4868484fefd8c287
mps0: SAS Address from SATA device = 4868484fefd8c287
mps0: SAS Address for SATA device = 4868484fefc6b38d
mps0: SAS Address from SATA device = 4868484fefc6b38d
mps0: SAS Address for SATA device = 4868484fefe9c36c
mps0: SAS Address from SATA device = 4868484fefe9c36c
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
cd0 at ahcich2 bus 0 scbus3 target 0 lun 0
da0 at mps0 bus 0 scbus0 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
da0: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
cd0: <TSSTcorp CDDVDW SH-S203N SB01> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfersda0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
(SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytesses0: SEMB SES Device
)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da1 at mps0 bus 0 scbus0 target 1 lun 0
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors)
cd1 at ahcich3 bus 0 scbus4 target 0 lun 0
da1: <ATA WDC WD1003FZEX-0 1A01> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 3 lun 0
cd1: <HL-DT-ST BD-RE BH10LS30 1.00> Removable CD-ROM SCSI device
cd1: [_SERIAL_NUMBER_XXXXXXXX]
cd1: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da2 at mps0 bus 0 scbus0 target 2 lun 0
da3: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 5723166MB (11721045168 512 byte sectors)
da3: quirks=0x8<4K>
da2: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da2: 600.000MB/s transfersda5 at mps0 bus 0 scbus0 target 5 lun 0
da5: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 5723166MB (11721045168 512 byte sectors)
da2: Command Queueing enabled
da2: 5723166MB (11721045168 512 byte sectors)
da5: quirks=0x8<4K>
da2: quirks=0x8<4K>
da4 at mps0 bus 0 scbus0 target 4 lun 0
da4: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da4: 600.000MB/s transfersda7 at mps0 bus 0 scbus0 target 7 lun 0
da7: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da7: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 5723166MB (11721045168 512 byte sectors)
da4: Command Queueing enabled
da4: 5723166MB (11721045168 512 byte sectors)
da4: quirks=0x8<4K>
da6 at mps0 bus 0 scbus0 target 6 lun 0
da7: quirks=0x8<4K>
da6: <ATA WDC WD60EFRX-68M 0A82> Fixed Direct Access SPC-4 SCSI device
da6: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 5723166MB (11721045168 512 byte sectors)
da6: quirks=0x8<4K>
Trying to mount root from zfs:zeus_root/ROOT/release-11.2 []...
uhub0: 17 ports with 17 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
GEOM_MIRROR: Device mirror/swap launched (2/2).
ugen0.2: <vendor 0x0557 product 0x7000> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 1> on usbus0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
uhub3: 4 ports with 3 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
uhub4: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub3
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.4: <CPS CP1500PFCLCD> at usbus0
random: unblocking device.
ums0 on uhub3
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0