Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-20 09:19:41
From: tuexen
Description: G4 MacMini
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT r339441 TCP-NODEBUG powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT(ofwfb): resolution 1920x1200 cpu0: Motorola PowerPC 7447A revision 1.2, 1415.86 MHz cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU> cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT> real memory = 1040392192 (992 MB) avail memory = 1008504832 (961 MB) random: unblocking device. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 dfs0: <Dynamic Frequency Switching> on cpu0 powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 powermac_nvram0: bank0 generation 326, bank1 generation 327 unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0 unin0: Version 210 iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0 iicbus0: <OFW I2C bus> on iichb0 iicbus0: <unknown card> at addr 0x1c0 pcib0: <Apple UniNorth Host-PCI bridge> mem 0xf0000000-0xf1ffffff irq 45 on ofwbus0 pci0: <OFW PCI bus> on pcib0 agp0: <Apple UniNorth 2 AGP Bridge> on hostb0 vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0x98000000-0x9fffffff,0x90000000-0x9000ffff irq 48 at device 16.0 on pci0 vgapci0: Boot video device pcib1: <Apple UniNorth Host-PCI bridge> mem 0xf2000000-0xf3ffffff irq 45 on ofwbus0 pci1: <OFW PCI bus> on pcib1 macio0: <Intrepid I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1 openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0 macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0 pmuextint0: <Apple PMU99 External Interrupt> extint-gpio 1 irq 47 on macgpio0 scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0 uart0: <z8530, channel A> on scc0 uart1: <z8530, channel B> on scc0 pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2,31,3,4 on macio0 pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0 pmu0: registered as a time-of-day clock, resolution 0.001000s iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0 iicbus1: <OFW I2C bus> on iichb1 iicbus1: <unknown card> at addr 0x1c0 ata0: <Apple MacIO ATA Controller> mem 0x20000-0x20fff,0x8800-0x88ff irq 24,12 on macio0 pci1: <network> at device 18.0 (no driver attached) ohci0: <Apple KeyLargo/Intrepid USB controller> mem 0x80083000-0x80083fff irq 29 at device 26.0 on pci1 usbus0 on ohci0 ohci1: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 63 at device 27.0 on pci1 usbus1 on ohci1 ohci2: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 63 at device 27.1 on pci1 usbus2 on ohci2 ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 63 at device 27.2 on pci1 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci3: <Apple KeyLargo/Intrepid USB controller> at device 24.0 on pci1 usbus4 on ohci3 ohci4: <Apple KeyLargo/Intrepid USB controller> at device 25.0 on pci1 usbus5 on ohci4 pcib2: <Apple UniNorth Host-PCI bridge> mem 0xf4000000-0xf5ffffff irq 45 on ofwbus0 pci2: <OFW PCI bus> on pcib2 ata1: <Intrepid Kauai ATA Controller> mem 0xf5004000-0xf5007fff irq 39 at device 13.0 on pci2 fwohci0: <Apple UniNorth 2> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:a8:74 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX] fwe0: Ethernet address: [_MAC_XXXXXXXXXX] sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound = 0x00000000 fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=2, CYCLEMASTER mode gem0: <Apple UniNorth2 GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2 miibus0: <MII bus> on gem0 bmtphy0: <BCM5221 10/100 media interface> PHY 0 on miibus0 bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow gem0: 10kB RX FIFO, 4kB TX FIFO gem0: Ethernet address: [_MAC_XXXXXXXXXX] cryptosoft0: <software crypto> on nexus0 Timecounter "timebase" frequency 41620997 Hz quality 0 Event timer "decrementer" frequency 41620997 Hz quality 1000 Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me) firewire0: bus manager 1 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <Apple OHCI root HUB> at usbus0 uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <NEC OHCI root HUB> at usbus1 uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen2.1: <NEC OHCI root HUB> at usbus2 uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub0: 2 ports with 2 removable, self powered ugen3.1: <NEC EHCI root HUB> at usbus3 uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 ugen4.1: <Apple OHCI root HUB> at usbus4 uhub4: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub1: 3 ports with 3 removable, self powered uhub2: 2 ports with 2 removable, self powered ugen5.1: <Apple OHCI root HUB> at usbus5 uhub5: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen0.2: <vendor 0x05ac product 0x1000> at usbus0 ukbd0 on uhub0 ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 1.10/15.38, addr 2> on usbus0 kbd1 at ukbd0 ums0 on uhub0 ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 1.10/15.38, addr 2> on usbus0 uhub5: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ums0: 5 buttons and [XY] coordinates ID=0 uhub3: 5 ports with 5 removable, self powered ugen3.2: <vendor 0x05ac product 0x911c> at usbus3 uhub6 on uhub3 uhub6: <vendor 0x05ac product 0x911c, class 9/0, rev 2.00/1.01, addr 2> on usbus3 uhub6: MTT enabled uhub6: 3 ports with 2 removable, self powered ada0 at ata1 bus 0 scbus1 target 0 lun 0 ada0: <ST9808210A 3.04> ATA-6 device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors) TCP Hpts created 1 swi interrupt thread and bound 0 cd0 at ata1 bus 0 scbus1 target 1 lun 0 cd0: <MATSHITA DVD-R UJ-835F GGND> Removable CD-ROM SCSI device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ada0s3 [rw]... ugen3.3: <Apple, Inc. Keyboard Hub> at usbus3 uhub7 on uhub6 uhub7: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/94.15, addr 3> on usbus3 uhub7: 3 ports with 2 removable, bus powered ugen3.4: <Apple, Inc Apple Keyboard> at usbus3 ukbd1 on uhub7 ukbd1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 4> on usbus3 kbd2 at ukbd1 uhid0 on uhub7 uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 4> on usbus3 ugen3.5: <Apple Computer, Inc. Apple Cinema HD Display> at usbus3 uhid1 on uhub6 uhid1: <Apple Computer, Inc. Apple Cinema HD Display, class 0/0, rev 1.10/1.15, addr 5> on usbus3 warning: total configured swap (925459 pages) exceeds maximum recommended amount (493472 pages). warning: increase kern.maxswzone or reduce amount of swap. lo0: link state changed to UP gem0: link state changed to DOWN gem0: link state changed to UP