Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-20 10:00:03
From: swegen
Description: AMD Rana 880G/SB850 NAS from 2011
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) II X3 420e Processor (2599.96-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f53 Family=0x10 Model=0x5 Stepping=3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant
real memory = 17179869184 (16384 MB)
avail memory = 16564764672 (15797 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <050113 APIC0946>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 1 package(s) x 3 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20171214/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1299979849 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <050113 XSDT0946> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xfa000000-0xfbffffff,0xfe8f0000-0xfe8fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe9ff000-0xfe9fffff irq 17 at device 0.0 on pci2
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd41f mem 0xfeaffc00-0xfeaffdff irq 18 at device 0.0 on pci3
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfebf0000-0xfebf7fff irq 19 at device 0.0 on pci4
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at device 0.0 on pci5
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c800000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe6ffc00-0xfe6fffff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fe000-0xfe6fefff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fd000-0xfe6fdfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6f7000-0xfe6f7fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
usbus6: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff000-0xfe6ff0ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
usbus7: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd7000-0xdbfff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen7.1: <ATI EHCI root HUB> at usbus7
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen3.1: <ATI OHCI root HUB> at usbus3
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <ATI EHCI root HUB> at usbus4
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub4: ugen0.1: <0x1b21 XHCI root HUB> at usbus0
<ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen1.1: <ATI OHCI root HUB> at usbus1
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub0: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ADATA SU800 P1021A> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <HGST HDN726040ALE614 APGNW7JH> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <ST4000DM004-2CV104 0001> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD40EZRZ-00GXCB0 80.00A80> ACS-3 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
uhub2: ada3: Command Queueing enabled
5 ports with 5 removable, self powered
ada3: 3815447MB (7814037168 512 byte sectors)
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <TOSHIBA DT01ACA300 MX6OABB0> ATA8-ACS SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXX]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors)
ada5 at ahcich6 bus 0 scbus6 target 0 lun 0
ada5: <TOSHIBA DT01ACA300 MX6OABB0> ATA8-ACS SATA 3.x device
uhub7: ada5: [_SERIAL_NUMBER_XXXXXX]
5 ports with 5 removable, self powered
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 2861588MB (5860533168 512 byte sectors)
ada6 at ahcich7 bus 0 scbus7 target 0 lun 0
ada6: <ST3000DM008-2DM166 CC26> ACS-2 ATA SATA 3.x device
ada6: [_SERIAL_NUMBER_XXXXX]
ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 2861588MB (5860533168 512 byte sectors)
ada6: quirks=0x1<4K>
Trying to mount root from ufs:/dev/gpt/ssdroot [rw,noatime]...
uhub5: 4 ports with 4 removable, self powered
random: unblocking device.
[2] ZFS filesystem version: 5
[2] ZFS storage pool version: features support (5000)
[2] uhub4: 4 ports with 4 removable, self powered
[3] uhub3: 5 ports with 5 removable, self powered
[3] uhub6: 5 ports with 5 removable, self powered
[3] aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
[3] aibs0: VSIF not found
[3] aibs0: v0: 0x06020011 Vcore Voltage 800 / 1600
[3] aibs0: v1: 0x06020063 +3.3V Voltage 2970 / 3630
[3] aibs0: v2: 0x06020062 +5V Voltage 4500 / 5500
[3] aibs0: v3: 0x06020061 +12V Voltage 10200 / 13800
[3] aibs0: t0: 0x06030012 CPU Temperature 600 / 950
[3] aibs0: t1: 0x06030014 MB Temperature 450 / 750
[3] aibs0: f0: 0x06040013 CPU Fan Speed 600 / 7200
[3] aibs0: f1: 0x06040073 Chassis Fan Speed 600 / 7200
[3] amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
[4] ugen1.2: <American Power Conversion Back-UPS RS 550GI FW857.L3 .I USB FWL3> at usbus1
[4] re0: link state changed to DOWN
[4] re1: link state changed to DOWN
[7] ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
[7] re0: link state changed to UP
[8] re1: link state changed to UP